MBRS1635 THRU MBRS1660 16.0 AMPS. Schottky Barrier Rectifiers Voltage Range 35 to 60 Volts Current 16.0 Amperes D2PAK Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260oC/10 seconds,0.25”(6.35mm)from case Mechanical Data Cases: JEDEC D2PAK molded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max 1 Weight: 0.08 ounce, 2.24 grams 2 3 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBRS Type Number 1635 Maximum Recurrent Peak Reverse Voltage 35 VRRM Maximum RMS Voltage 24 VRMS Maximum DC Blocking Voltage 35 VDC Maximum Average Forward Rectified Current at Tc=125OC Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) at Tc=125oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at: (Note 2) IF=16A, TC=25oC IF=16A, TC=125oC Maximum Instantaneous Reverse Current @ Tc =25℃ at Rated DC Blocking Voltage (Note 2) @ Tc=125℃ Maximum Typical Thermal Resistance(Note 3) Operating Junction Temperature Range Storage Temperature Range MBRS 1645 MBRS 1650 MBRS 1660 Units 45 31 45 50 35 50 60 42 60 V V V I(AV) 16 A IFRM 32.0 A IFSM 150 A IRRM 1.0 0.5 A VF 0.63 0.57 0.75 0.65 V IR 0.2 40.0 1.0 50.0 mA mA RθJC TJ TSTG Notes: 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg - 118 - 1.5 -65 to +150 -65 to +175 ℃/W ℃ ℃ RATINGS AND CHARACTERISTIC CURVES (MBRS1635 THRU MBRS1660) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 150 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 20 16 12 8 4 100 75 50 25 0 1 0 0 50 100 o CASE TEMPERATURE. ( C) 150 10 100 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 40 50 Tj=125 0C 10 10 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 120 Pulse Width=300 s 1% Duty Cycle 1 Tj=25 0C MBRS1635-MBRS1645 MBRS1650 & MBRS1660 0.1 Tj=125 0C 1 Tj=75 0C 0.1 0.01 Tj=25 0C MBRS1635-MBRS1645 MBRS1650 & MBRS1660 0.01 0 0.1 0.2 0.3 0.4 0.001 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0 FIG.5- TYPICAL JUNCTION CAPACITANCE 60 80 100 120 140 TRANSIENT THERMAL IMPEDANCE. ( OC/W) 100 Tj=25 0C f=1.0MHz Vsig=50mVp-p JUNCTION CAPACITANCE.(pF) 40 FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS 6,000 1,000 MBRS1635-MBRS1645 MBRS1650 & MBRS1660 100 0.1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) 1 10 100 REVERSE VOLTAGE. (V) 10.0 1 0.1 0.01 0.1 1 T, PULSE DURATION. (sec) - 119 - 10 100