METALIZED POLYESTER FILM CAPACITORS MES: Minature, Radial, Lead Space = 5mm INTRODUCTION RoHS FEATURES MES Series are constructed with metalized polyester film dielectric, copperply lead and epoxy resin powder coating. They are suitable for blocking, coupling, decoupling, filtering, bypass timing circuit and ideal for use in telecommunication equipment, data processing equipment, industrial instrument, automatic control systems and other general electronic equipment. SPECIFICATIONS PART NUMBER EXAMPLE MES 104 K 2A 050 B 250 S** -40°C ~ 125°C (VR Derates 1.25% per °C over 105°C) Lead space* * Leadspace is straight lead non-formed original leadspace. Max T W Max H Max 1mm Max 25 Max TOLERANCE Code Tolerance LEAD STYLE EXAMPLES Code S Code K J dɸ P+1 K CAPACITANCE CODE M F 0.01 0.047 0.1 0.47 pF 10000 47000 100000 470000 Code 103 473 104 474 50 1H 63 1J 100 2A 250 2E 400 2G PACKAGING Method Code Bulk B 5mm max LL+1mm LL+1mm Code Code FF 1.0 105 RATED VOLTAGE WV Code 1mm max Code Code I I 5mm max 5mm max LL+1mm LL+1mm Typical length (LL)is 20 mm for straight lead, bulk pack 630 2J TAPE CODE (Lead spacing of tape) Ammo A Spacing Packing Code Reel R 5mm A or R RT1 (See Diagram) RADIAL LEAD SPACING * Leadspace is straight lead non-formed original leadspace. mm Code 5 050 LEAD LENGTH FROM SEATING PLANE (Bulk Pack) mm 5 10 Code 050 100 15 20 150 200 LEAD STYLE Code Style S Straight K Kink-In (Stand Off) F Form Out ** For Bulk packaging with formed leads, add an additional 3 digit lead spacing code at end of part number. 25 250 Page 1 of 3 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1DC04 2015.08.28 METALIZED POLYESTER FILM CAPACITORS MES: Minature, Radial, Lead Space = 5mm RoHS MAXIMUM DIMENSIONS (mm) W. V. ( μF) code 0.001 102 0.0022 122 0.0033 332 0.0047 472 0.0056 562 0.0068 682 0.0082 822 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.1 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 1.2 125 W 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 7.0 7.0 7.0 7.0 7.0 7.0 50 / 63VDC (1H/1J) H T P d V / µs 6.5 3.5 5 0.5 10 6.5 3.5 5 0.5 10 6.5 3.5 5 0.5 10 6.5 3.5 5 0.5 10 6.5 3.5 5 0.5 10 6.5 3.5 5 0.5 10 6.5 3.5 5 0.5 10 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.0 5 0.5 25 6.5 4.5 5 0.5 25 6.5 4.5 5 0.5 25 6.5 4.5 5 0.5 25 6.5 4.5 5 0.5 25 6.5 4.5 5 0.5 25 6.5 4.5 5 0.5 25 6.5 4.5 5 0.5 25 6.5 4.5 5 0.5 25 7.5 4.5 5 0.6 25 8.5 5.0 5 0.6 25 8.5 5.0 5 0.6 25 8.5 5.0 5 0.6 25 10.0 6.5 5 0.5 25 10.0 6.5 5 0.6 20 100VDC (2A) W H T P d V / µs 6.5 6.5 3.5 5 0.5 15 6.5 6.5 3.5 5 0.5 15 6.5 6.5 3.5 5 0.5 15 6.5 6.5 3.5 5 0.5 15 6.5 6.5 3.5 5 0.5 15 6.5 6.5 3.5 5 0.5 15 6.5 6.5 3.5 5 0.5 15 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.0 5 0.5 25 6.5 6.5 4.5 5 0.5 25 6.5 6.5 4.5 5 0.5 25 6.5 6.5 4.5 5 0.5 25 6.5 6.5 4.5 5 0.5 25 6.5 6.5 4.5 5 0.5 25 6.5 6.5 4.5 5 0.5 25 6.5 6.5 4.5 5 0.5 25 6.5 6.5 4.5 5 0.5 25 7.0 7.5 4.5 5 0.6 25 7.0 8.5 5.0 5 0.6 25 7.0 8.5 5.0 5 0.6 25 7.0 10 6.0 5 0.6 25 7.0 10 6.0 5 0.6 25 7.0 10.5 7.0 5 0.6 20 W 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 250VDC (2E) H T P d V / µs 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 9.5 3.5 5 0.5 30 9.5 4.5 5 0.5 30 9.5 4.5 5 0.5 30 9.5 4.5 5 0.5 30 9.5 4.5 5 0.5 30 9.5 4.5 5 0.5 30 9.5 4.5 5 0.5 30 9.5 4.5 5 0.5 30 10 5.0 5 0.5 30 10 5.0 5 0.5 30 10 6.0 5 0.5 50 10 6.0 5 0.5 50 10.5 7.0 5 0.5 50 11 7.0 5 0.5 50 12 8.0 5 0.5 50 12 8.5 5 0.5 50 W 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 400VDC (2G) H T P d V / µs 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 W 6.5 6.5 6.5 6.5 630VDC (2J) H T P d V / µs 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 6.5 3.5 5 0.5 50 PERFORMANCE Item Metalized Polyester Capacitance Drift Cycled through the operating temperature range 2%. Humidity Test Will withstand the test of R.H. 95% at 40°C for 1000hrs. C < 5% DF < 1.2% IR > 10000MΩ Load Test Will withstand a testing voltage at 140% of W.V. for 1000hrs at 85°C. C < 5% DF < 1.2% IR > 5000MΩ Lead Pull Test Will withstand a pull of 1.5Kg applied axialy for 10 seconds. Lead Bend Test Will sustain two cycles without breaking when attaching a load of 0.5Kg to the end of the lead and then rotating the capacitor 90º from the direction of lead egress. Then 180 in opposite direction, then back to the starting point. Solderability Immersed in molten solder (230 + 0.5 sec.) after testing, the wound lead and gap in the wound lead will be covered and filled by solder. Will be difficult to unwind by finger. Dielectric Strength Shall withstand 200% or 160% of rated voltage at 25°C for 1 minute with current limiting resistance of 1 Ω / V. Page 2 of 3 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1DC04 2015.08.28 METALIZED POLYESTER FILM CAPACITORS MES: Minature, Radial, Lead Space = 5mm RoHS SOLDERING The area under the curve is the recommended soldering time & temp. for the materials shown. RADIAL TAPING P2 P P2 h P h t t d H P1 P1 W H H d W1 W1 WO W WO W2 W2 F PO Do F PO Do Fig. 2 F=5mm (RT1) Fig. 1 F=5mm (RT1) SPECIFICATIONS Description Letter Dimension (mm) RT1 Lead Wire Diameter d 0.5 / 0.6 Tapping Pitch P 12.7 Feed Hole Pitch PO 12.7 Centering of the Lead Wire P1 3.85 Centering of the Body P2 6.35 Lead Spacing (Pitch) F 5 Component Alignment ∆h 0 Height of Componenet from Tape Center H 18.5 Carrier Tape Width W 18 Hold Down Tape Width WO 6 Hole Position W1 9 Hold Down Tape Position W2 3 Feed Hole Diameter Do 4 t 0.7 fig 1 or 2 Tape Thickness Figure Remark: *Allowance of accumulated pitch less than 1mm at the sum of 20 pitches. Remark: *Continuous empty component less than 3 consecutive pieces. Remark: *Total empty on one reel less than 1%. Page 3 of 3 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1DC04 2015.08.28