METALIZED POLYESTER FILM CAPACITORS RoHS MDF: General Purpose, Lead Space 7.5mm~42.5mm INTRODUCTION FEATURES MDF Series are constructed with metalized polyester film dielectric, copperply lead and epoxy resin coating. They are suitable for blocking, coupling, decoupling, filtering, bypass timing circuit and ideal for use in data / telecomm equipment, industrial instrument, automatic control systems and other general electronic application. • High moisture resistance • Good solderability • Non-inductive construction • Self-healing proprety SPECIFICATIONS Item Operating Temp. Range PART NUMBER EXAMPLE Capacitance Range Capacitance Tolerance MDF 103 K 2A 075 B 200 S Rated Voltage VR 85°C Dissipation Factor Lead space* Insulation Resistance * Leadspace is straight lead non-formed original leadspace. TOLERANCE LEAD STYLE EXAMPLES Code Code SS Code Code KK Code Tolerance J 2mm max 5mm max LL+1mm LL+1mm 25 MAX K Code Code FF M CAPACITANCE CODE F 0.01 0.047 0.1 0.47 pF 10000 47000 100000 470000 Code 103 473 104 474 1.0 105 4.7 475 10 106 100 2A 400 2G 250 2E 630 2J PACKAGING Method Code 5mm max 5mm max LL+1mm LL+1mm Typical length (LL)is 20 mm for straight lead, bulk pack RATED VOLTAGE WV Code Code Code I I TAPE CODE (Lead spacing of tape, if taped) Bulk B Ammo A Reel R Spacing Packing Code RADIAL LEAD SPACING 7.5mm A or R RT2 10mm A RT3 15mm A RT4 * Leadspace is straight lead non-formed original leadspace. mm Code 7.5 075 10 100 15 20 27.5 32.5 150 200 275 325 37.5 375 42.5 425 LEAD LENGTH FROM SEATING PLANE mm 5 Code 050 10 100 15 150 20 200 25 250 LEAD STYLE Code S K F I Style Straight Kink-In (Stand Off) Form Out Form In Page 1 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1DC08 2014.07.24 METALIZED POLYESTER FILM CAPACITORS RoHS MDF: General Purpose, Lead Space 7.5mm~42.5mm MAXIMUM DIMENSIONS (mm) W.V. 50VDC(1H) and 100VDC(2A) H T P (µF) Code W 0.01 103 10.5 9.0 5.5 7.5 0.015 153 10.5 9.5 6.0 7.5 0.022 223 10.5 9.5 6.0 7.5 0.033 333 10.5 9.5 6.0 7.5 0.047 473 10.5 9.5 6.0 7.5 0.068 683 10.5 9.5 6.0 7.5 0.1 104 10.5 9.5 6.0 7.5 0.15 154 13.0 9.0 5.5 10.0 0.22 224 13.0 10.0 6.5 10.0 0.33 334 13.0 11.5 8.0 10.0 0.47 474 18.5 11.0 6.0 15.0 0.68 684 18.5 12.5 7.5 15.0 1 105 18.5 13.5 8.5 15.0 1.5 155 22.5 14.5 8.0 20.0 2.2 225 22.5 16.5 10.0 20.0 3.3 335 22.5 20.0 12.0 20.0 4.7 475 22.5 21.5 14.0 20.0 6.8 685 32.0 23.5 14.5 27.5 10 106 32.0 29.0 18.0 27.5 dΦ 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 250VDC (2E) W H T P 10.5 10.5 10.5 10.5 10.5 10.5 13.0 18.5 18.5 18.5 22.5 22.5 22.5 32.0 32.0 32.0 36.0 42.0 42.0 9.0 9.5 9.5 9.5 9.5 10.0 10.0 11.0 11.5 12.0 12.5 13.5 15.0 17.5 19.0 23.0 24.0 27.0 35.0 5.5 6.0 6.0 6.0 6.0 6.5 6.5 6.0 6.5 7.0 7.5 8.5 10.0 9.5 10.5 13.5 14.0 16.0 19.0 7.5 7.5 7.5 7.5 7.5 7.5 10.0 15.0 15.0 15.0 20.0 20.0 20.0 27.5 27.5 27.5 32.5 37.5 37.5 400VDC (2G) dΦ W 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 10.5 10.5 13.0 13.0 13.0 13.0 18.5 18.5 22.5 22.5 22.5 32.0 32.0 36.0 36.0 42.0 46.0 H T P 9.0 9.5 9.5 10.0 12.0 13.0 12.5 13.5 14.5 15.0 18.5 19.0 21.5 23.5 27.5 30.5 34.0 5.5 6.0 6.0 6.5 7.0 8.0 7.0 8.0 8.0 9.0 11.5 12.0 13.5 14.0 18.5 18.5 22.0 7.5 7.5 10.0 10.0 10.0 10.0 15.0 15.0 20.0 20.0 20.0 27.5 27.5 32.5 32.5 37.5 42.5 630VDC (2J) dΦ 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 W H T P 13.0 13.0 13.0 18.5 18.5 18.5 18.5 23.0 23.0 32.0 32.0 36.0 36.0 42.0 46.0 10.0 10.5 12.5 12.0 12.5 14.0 14.5 15.0 15.5 19.0 22.0 22.5 29.0 29.5 32.5 6.0 6.5 7.5 6.5 7.5 8.5 10.0 9.5 10.0 12.0 13.5 14.5 16.0 18.5 20.5 10.0 10.0 10.0 15.0 15.0 15.0 15.0 20.0 20.0 27.5 27.5 32.5 32.5 37.5 42.5 dΦ 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 PERFORMANCE Item Capacitance Drift Humidity Test Load Test Lead Pull Test Metalized Polyester Cycled through the operating temperature range 2% Will withstand the test of R.H. 95% at 40°C for 1000hrs. C < 5% DF < 1.2% IR > 10000M Will withstand a testing voltage at 140% of W.V. for 1000hrs at 85 °C. C < 5% DF < 1.2% IR > 5000M Will withstand a pull of 1.5Kg applied axially for 10 seconds Lead Bend Test Will sustain two cycles without breaking when attaching a load of 0.5Kg to the end of the lead and then rotating the capacitor 90°C from the direction of lead egress. Then 180°C in opposite direction. Then back to the starting point. Immersed in molten solder 230 + 0.5sec. After testing, the wound lead and gap in the wound lead will be covered and filled by solder. Will be difficult to unwind by finger. Dielectric Strength Shall withstand 200% or 160% of rated voltage at 25°C for 1 minute with current limiting resistance of 1 / V Solderability SOLDERING The area under the curve is the recommended soldering time & temp. for the materials shown. Page 2 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1DC08 2014.07.24