SCHOT TKY BARRIER RECTIFIER MBR1020 *Thru MBR1060* 10 Amps RoHS FEATURES • Low power loss, high efficiency • High current capability, low forward voltage drop • High surge capability • For use in low voltage, high frequency inverters, free wheeling and polarity protection applications seconds, • High temperature soldering:260℃/10 0.25”( 6.35mm)from case MECHANICAL DATA • Molded plastic body (UL 94V-0 rated) • Terminals: lead free. solderable per MIL-STD-750, Method 2026 • Polarity: As marked • Mounting position: Any - .max • Mounting torque: 5 in. lbs • Weight: 0.08 ounce, 2.24 grams SUFFIX X SUFFIX Y PIN1 PIN1 Case PIN2 Case PIN2 TO-220AC Dimensions in inches and (millimeters) MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS TA= 25℃ unless otherwise specified. Parameter Symbol MBR1020* MBR1030* MBR1040* MBR1050* MBR1060* Unit Maximum Repetitive Peak VRRM 20 30 40 50 60 V Reverse Voltage Maximum DC Blocking Voltage VDC 20 30 40 50 60 V Maximum Average Forward 10.0 Rectified Current IO A @ Tc = 125°C Peak Forward Surge Current IFSM 250 A 60Hz Half-Sine Wave, 1 Cycle Forward Voltage Drop 0.55 0.70 @ IF = 10A, Ta = 25°C VFM V @ IF = 10A, Ta = 100°C Peak DC Reverse Current 0.2 Ma @ Ta = 25°C IRM at rated DC Blocking Voltage 50 @ Ta = 100°C °C/W Typical Thermal Resistance R0JC 3.0 Junction to Lead (Note) -55 to +125 -55 to +150 Operating Temperature Range TJ °C -55 to +150 Storage Temperature Range TSTG °C NOTE: Thermal Resistance from Junction to lead, with Heatsink Size (2”x3”x0.25”)Al-Plate. Page 1 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C3SBR7 2013.05.29 SCHOT TKY BARRIER RECTIFIER MBR1020 Thru MBR1060 10 Amps RoHS RATING & CHARACTERISTIC CURVES FIG.2-MAXIMUM FORWARD CURRENT DERATING AVERAGE FORWARD CURRENT (A) MB PEAK FORWARD SURGE CURRENT (A) FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 8.3ms Single Half Sine Wave JEDEC Method R1 R1 050 MB 60 -10 -10 020 40 NUMBER OF CYCLES AT 60Hz TJ=25℃ Pulse Width=300us 1% Duty Cycle MB R1 0 02 -10 40 MB R 5 10 0-1 06 0 FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (uA) INSTANTANEOUS FORWARD SURGE CURRENT (A) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE (V) TJ=100℃ TJ=75℃ TJ=25℃ PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Page 2 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C3SBR7 2013.05.29