Bulletin 800S Standard Duty Stations 10 Type 1 or 4 Complete Assembled Stations Pilot Lights Push button stations with pilot lights can operate on either 120V or 240V by changing connections. A red pilot lens is supplied. Selector Switches All two-position Bulletin 800S standard duty selector switch stations can be changed to three-position in the field, and the three-position selector switches can be changed to two-position. Instructions for changing are included with each station. In addition to the standard marking, all selector switches are supplied with adhesive-backed metal legend plates, marked as follows: OFF-ON, FOR-REV, HAND-AUTO, OPEN-CLOSE, HIGH-LOW, SUMMER-WINTER, SUMMER-OFF-WINTER, HIGH-OFF-LOW, OPEN-OFF-CLOSE, FOR-OFF-REV, HAND-OFF-AUTO. Flush Mount Units fit a standard GEM or Handy Type Wall Box. Contact Symbol 3 Cat. No. 800S-2AS Type 1 Flush Mount Unit ➊ — Wall Box not included Description and Legend Marking START-STOP Contact Symbol 3 Gray Painted Flush Plate Cat. No. 800S-2AS Stainless Steel Flush Plate Cat. No. 800S-2ASQ ➊ Not rated for DC operation. 1 Cat. No. 800S-2SAP Cat. No. 800S-2SCM Momentary Contact Buttons and Pilot Light — 120V or 240V, Type 1 Description and Contact Cat. No. Legend Marking Symbol START-STOP 6 800S-2SAP Cat. No. 800S-R3SX Selector Switches — Type 1 Description and Contact Legend Marking Symbol OFF-ON — 2-position HAND-OFF-AUTO — 3-position 8 9 Maintained Contact Buttons — Type 1 Description and Contact Legend Marking Symbol 7 ON-OFF START-STOP 7 Cat. No. 800S-2SCM 800S-2SBM Cat. No. 800S-R2SXP Cat. No. 800S-R2SX 800S-R3SX Selector Switch and Pilot Light — 120V or 240V, Type 1 Description and Contact Cat. No. Legend Marking Symbol OFF-ON — 2-position HAND-OFF-AUTO — 3-position 10 11 800S-R2SXP 800S-R3SXP 10-325 Bulletin 800S Standard Duty Stations Type 1 or 4 Complete Assembled Stations, Continued Cat. No. 800S-2SA Description and Legend Marking Cat. No. 800S-2SA4 Contact Symbol Type 1 Cat. No. Cat. No. STOP — N.C. Contact STOP — N.O. Contact START 1 2 2 800S-1SA 800S-1SAK 800S-1SB 800S-1SA4 800S-1SAK4 800S-1SB4 START-STOP — N.O. - N.C. Contact START-STOP — N.O. - N.O. Contact FOR-REV OPEN-CLOSE ON-OFF — N.O. - N.C. Contact ON-OFF — N.O. - N.O. Contact RAISE-LOWER UP-DOWN 3 4 4 4 3 4 4 4 800S-2SA 800S-2SAK 800S-2SB 800S-2SF 800S-2SE 800S-2SEK 800S-2SD 800S-2SC 800S-2SA4 800S-2SAK4 800S-2SB4 800S-2SF4 800S-2SE4 800S-2SEK4 800S-2SD4 800S-2SC4 FAST-SLOW-STOP FOR-REV-STOP OPEN-CLOSE-STOP RAISE-LOWER-STOP UP-DOWN-STOP 5 5 5 5 5 800S-3SF 800S-3SA 800S-3SD 800S-3SB 800S-3SC — Momentary Contact Buttons 0 Type 4 Die Cast Aluminum Enclosure ➊➋ ➊ Not rated for DC operation. ➋ Flip levers permit attachment of lock without additional accessory. Contact Ratings — (IEC 337-1) (NEMA ICS 2-125) Maximum Continuous Current Ith 5 A. Bulletin 800S push button stations have control circuit ratings as follows: Utilization Category Maximum Operational Voltage Ue IEC AC 600 DC 600 Rated Operational Current NEMA Volts Ue Make Break AC-11 B600 480…600 240…480 120…240 3600V A 3600V A 30 A 360V A 360V A 3.0 A DC-11 P600 28…600 24…28 ➌ 138V A 5.0 A ➌ For applications below 24V and 24 mA, Bulletin 800T units with Logic Reed, sealed switch, or stackable sealed switch contact blocks are recommended. 10-326 Bulletin 800S Standard Duty Stations Type 1 or 4 Accessories Complete Assembled Stations Description Pilot Light Lens Red lens replacement cap. Cat. No. 800S-N90R Pilot Light Lens Cat. No. 800S-N90R Lamp 120V Lamp 800S-N60 Locking Attachments This device is used with extended push buttons or 2-position selector switches. 800S-N1 Lamp Cat. No. 800S-N60 1 This device is used with 3-position selector switches, to lock in the right or left position. 800S-N4 Locking Attachments Cat. No. 800S-N1 10-327 Bulletin 800S Standard Duty Stations Type 1 or 4 Approximate Dimensions and Shipping Weights Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes. Type 1 — General Purpose Enclosures Knockouts for 1/2 (12.7) & 3/4 (19.1) Conduits (Top & Bottom) 7/ (5.6) Dia. 32 Mtg. Holes (2) Knockouts for 1/2 (12.7) & 3/4 (19.1) Conduits (Top & Bottom) 1 1/32 (26.2) 7/ (5.6) Dia. 32 Mtg. Holes (2) 4 1/16 2 (103.2) (50.8) 1 1/32 REV Padlocking Adjustment 1 1/8 (28.6) (22.2) 1/ 8 2 7/32 (56.4) (3.2) 2 5/16 (58.7) For Stop Button Only Knockouts for 1/2 (12.7) & 3/4 (19.1) Conduits (Top & Bottom) 7/ 7/ 8 16 (22.2) (11.1) 5/ 8 (15.9) OFF HAND AUTO 3 9/32 (83.3) Padlocking Adjustment Insulation 1 1/8 (28.6) 1 1/2 (38.1) Two-Unit Flush Mounting Station Shipping Wt. 1 lb (0.45 kg) 2 5/16 (58.7) 3/ 8 (9.5) 7/ 2(56.4) 32 (22.2) Selector Switch Surface Mounting Station Shipping Wt. 1 lb (0.45 kg) Type 4 — Watertight Enclosure 2 15/16 (74.6) 3 7/16 (87.3) 1/ 2 (12.7) START 5 1/4 (133.4) 6 1/8 (155.6) STOP 3/ (19.1) Pipe Tap 4 CL 3/ 4 (19.1) 2 1/8 (54) 19/ (7.5) Dia. Mtg. Holes (4) 64 Shipping Wt. 3 lbs (1.36 kg) 10-328 4 1/16 (103.2) 5/ 8 (15.9) 1/ 2 (12.7) 4 5/8 (117.5) 2 13/16 (71.4) CL of Conduit 1 7/8 (47.6) STOP 2 7/32 (22.2) (56.4) 7/ 8 (22.2) Three-Unit Surface Mounting Station Shipping Wt. 2 lbs (0.91 kg) 7/ (5.6) Dia. 32 Mtg. Holes (2) START 5/8 (15.9) 1/ (3.2) for 8 Stop Button Only One- and Two-Unit Surface Mounting Stations Shipping Wt. 1 lb (0.45 kg) 2 3/4 (69.9) CL (12.7) 1 1/8 (28.6) 0 4 1/8 (26.2) (104.8 5 3/8 (136.5) STOP 7/ 8 2 5/16 (58.7) 7/ 8 (22.2) 1/ 2 (26.2) Padlocking Adjustment 1/ 2 (12.7) FOR CL STOP 1/ 2 (12.7) 7/ 8 (22.2) of Conduit START 5/8 (15.9) 7/ 8 (22.2)