Bulletin 1492 Finger-Safe Terminal Blocks High Density 2.80" (71 mm) Note: Height dimension is measured from top of rail to top of terminal block. 1492-H2 1.50" (38 mm) 1492-H1 Dimensions are not intended to be used for manufacturing purposes. 1.56" (39.7 mm) 0.24" (6.1 mm) Finger-Safe terminal block, singlecircuit, screw with pressure plate. Specifications Approvals Voltage Rating Wire Strip Length Recommended Tightening Torque Density Insulation Temperature Range Terminal Blocks Color: 0.24" (6.1 mm) Finger-Safe terminal block, two-circuit, screw with pressure plate. /CSA/IEC /CSA/IEC 600V AC/DC 600V AC/DC Maximum Current Wire Range (Rated Cross Section) 2.61" (66.3 mm) 30 A 24 A #30…#12 AWG (0.05…4 mm2) #30…#12 AWG (0.05…4 mm2) 0.38" (9.7 mm) 0.38" (9.7 mm) 3…7 lb-in. (0.3…0.8 Nm) 3…7 lb-in. (0.3…0.8 Nm) 50 pcs./ft (164/m) 50 pcs./ft (164/m) –40…+221°F (–40…+105°C) –40…+221°F (–40…+105°C) Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. 50 1492-H1 80 1492-H2 1492-H1296 (148/Rail) 1 1492-H2148 (148/Rail) 1 Gold 1492-H1GL 80 1492-H2GL 50 White Two 3' Rails White Red 1492-H1RE 80 1492-H2RE 50 Blue 1492-H1B 80 1492-H2B 50 50 Black 1492-H1BL 80 1492-H2BL Green 1492-H1G 80 1492-H2G 50 Yellow 1492-H1Y 80 1492-H2Y 50 Brown 1492-H1BR 80 1492-H2BR 50 Violet 1492-H1VT 80 1492-H2VT 50 Gray 1492-H1GY 80 1492-H2GY 50 Orange 1492-H1OR 80 1492-H2OR 50 Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. Accessories (page 0-185) Mounting Rails: 3' Scored A-B Rail 1492-N1 20 1492-N1 20 3' Rigid A-B Rail 1492-N22 20 1492-N22 20 3' High Rise A-B Rail 1492-N44 2 1492-N44 2 Standoff Brackets (use every 12") 1492-N25 2 1492-N25 2 1 m Symmetrical DIN — — — — 1 m Symmetrical DIN (alumin.) — — — — 1 m Hi-Rise Symmetrical DIN — — — — 1 m Angled Hi-Rise Sym. DIN — — — — End Barrier 1492-N36 50 1492-N40 50 End Anchors: A-B Rail — Heavy Duty 1492-N23 10 1492-N23 10 A-B Rail — Normal Duty 1492-N47 50 — — A-B Rail — Retaining Clip — Light Duty 1492-N2 50 — — DIN Rail — Normal Duty — — — — DIN Rail — Heavy Duty — — — — Side Jumpers: 2-pole Uninsulated 1492-N42 50 1492-N42 50 1492-SJ6-10 10 1492-SJ6-10 10 50-pole Uninsulated 1492-N39 10 1492-N39 10 Side Jumper Insulating Sleeve 1492-SJS 10 1492-SJS 10 1492-N41 50 1492-N41 50 10-pole Insulated Marking Systems 66 Bulletin 1492 Finger-Safe Terminal Blocks High Density, Continued 1.56" (39.7 mm) Approvals 1.58" (40.1 mm) 2.61" (66.28 mm) Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Density Insulation Temperature Range Terminal Blocks Color: 1.56" (39.7 mm) 0.32" (8.1 mm) Finger-Safe terminal block, single-circuit, multi-rail mount. /CSA/IEC 600V AC/DC Maximum Current 0.24" (6.1 mm) Finger-Safe terminal block, two-circuit, multi-rail mount. /CSA/IEC Voltage Rating Accessories 0.24" (6.1 mm) Finger-Safe terminal block, single-circuit, multi-rail mount. Specifications 1492-HM3 2.84" (72 mm) Note: Height dimension is measured from top of rail to top of terminal block. 1492-HM2 1.50" (38 mm) 1492-HM1 Dimensions are not intended to be used for manufacturing purposes. /CSA/IEC 600V AC/DC 600V AC/DC 30 A 24 A [IEC: 30 A] 55 A [IEC: 57 A] #30…#12 AWG (0.05…4 mm2) #30…#12 AWG (0.05…4 mm2) #22…#8 AWG (0.5…10 mm2) 0.38" (9.7 mm) 0.38" (9.7 mm) 0.38" (9.7 mm) 3…7 lb-in. (0.3…0.8 Nm) 3…7 lb-in. (0.3…0.8 Nm) 8…16 lb-in. (0.9…1.8 Nm) 50 pcs./ft (164/m) 50 pcs./ft (164/m) 37 pcs./ft (123/m) –40…+221°F (–40…+105°C) –40…+221°F (–40…+105°C) –40…+221°F (–40…+105°C) Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. 50 White 1492-HM1 80 1492-HM2 50 1492-HM3 Gold 1492-HM1GL 80 1492-HM2GL 50 — — Red 1492-HM1RE 80 1492-HM2RE 50 1492-HM3RE 50 Blue 1492-HM1B 80 1492-HM2B 50 1492-HM3B 50 Black 1492-HM1BL 80 1492-HM2BL 50 1492-HM3BL 50 Green 1492-HM1G 80 1492-HM2G 50 1492-HM3G 50 Yellow 1492-HM1Y 80 1492-HM2Y 50 1492-HM3Y 50 Brown 1492-HM1BR 80 1492-HM2BR 50 1492-HM3BR 50 Violet 1492-HM1VT 80 1492-HM2VT 50 1492-HM3VT 50 Gray 1492-HM1GY 80 1492-HM2GY 50 1492-HM3GY 50 Orange 1492-HM1OR 80 1492-HM2OR 50 1492-HM3OR 50 Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. (page 0-185) Mounting Rails: 3' Scored A-B Rail 1492-N1 20 1492-N1 20 1492-N1 20 3' Rigid A-B Rail 1492-N22 20 1492-N22 20 1492-N22 20 3' High Rise A-B Rail 1492-N44 2 — — 1492-N44 2 Standoff Brackets (use every 12") 1492-N25 2 1492-N25 2 1492-N25 2 1 m Symmetrical DIN 199-DR1 10 199-DR1 10 199-DR1 5 1 m Symmetrical DIN (alumin.) 1492-DR5 10 1492-DR5 10 1492-DR5 5 1 m Hi-Rise Symmetrical DIN 1492-DR6 2 1492-DR6 2 1492-DR6 2 1 m Angled Hi-Rise Sym. DIN 1492-DR7 2 1492-DR7 2 1492-DR7 2 1492-NM36 50 1492-NM40 50 1492-NM36 50 1492-N23 10 1492-N23 10 1492-N23 10 1492-N47 50 — — 1492-N47 50 End Barrier End Anchors: A-B Rail — Heavy Duty A-B Rail — Normal Duty A-B Rail — Retaining Clip — Light Duty 1492-N2 50 — — — — DIN Rail — Normal Duty 1492-EA35 50 1492-EA35 50 1492-EA35 50 DIN Rail — Heavy Duty 1492-EAH35 50 1492-EAH35 50 1492-EAH35 50 — Side Jumpers: 2-pole Uninsulated 10-pole Insulated 50-pole Uninsulated Side Jumper Insulating Sleeve Marking Systems 1492-N42 50 1492-N42 50 — 1492-SJ6-10 10 1492-SJ6-10 10 1492-SJ8-10 5 1492-N39 10 1492-N39 10 — — 1492-SJS 10 1492-SJS 10 — — 1492-SMN81 5 1492-SMN81 5 1492-SMN81 5 Accessories — Page 185 67