Bulletin 1492 Panel Mount Blocks ➊ 1.8" ➋ (45.7 mm) High-density 6-pole panel mount terminal block. Can be interconnected to make 12- and 18-pole units. Approvals Voltage Rating Maximum Current (per pole) Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Insulation Temperature Range Terminal Blocks Terminal Block Accessories (page 185) Jumpers: 2-Pole Uninsulated 2.81" ➋ (71.4 mm) Standard 6-pole panel mount block. Screw terminal with wire clamp. /CSA ➊ 5.2" ➋ 1.5" (38.1 mm) ➍ (132.1 mm) 1.5" (38.1 mm) ➍ 1.54" (39.1 mm) ➌ Specifications ➊ 1492-HJ812 0.97" (24.6 mm) 1492-HJ86 0.97" (24.6 mm) 1.34" (34 mm) 1492-HC6 Dimensions are not intended to be used for manufacturing purposes. Standard 12-pole panel mount block. Screw terminal with wire clamp. /CSA 600V AC/DC /CSA 600V AC/DC 600V AC/DC 25 A 25 A 25 A #30…#12 AWG (0.05…4 mm2) #18…#12 AWG (1…4 mm 2) #18…#12 AWG (1…4 mm2) 0.38" (9.7 mm) 0.38" (9.7 mm) 0.38" (9.7 mm) 3…7 lb-in. (0.3…0.8 Nm) 8…16 lb-in. (0.9…1.8 Nm) 8…16 lb-in. (0.9…1.8 Nm) –40…+221°F (–40…+105°C) –40…+221°F (–40…+105°C) –40…+221°F (–40…+105°C) Pcs./ Pkg. Cat. No. 1492-HC6 1 Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. 1492-HJ86 1 1492-HJ812 1 Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. 1492-N38 50 1492-N35 50 1492-N35 50 50-Pole Uninsulated 1492-N39 10 — — — — Side Jumper Insulating Sleeve 1492-SJS 10 — — — — Anchor Unit: (required every 12th block) Not Required — Not Required — Not Required — End Piece Not Required — Not Required — Not Required — ➊ ➋ ➌ ➍ #8-32 screw. Measurement between mounting screw centers. Mounting screws are offset 0.31" (7.9 mm) from centerline. Mounting screws are offset 0.19" (4.76 mm) from centerline. Accessories — Page 185 86 Bulletin 1492 Panel Mount Blocks 1492-25T 1.03" (26.2 mm) 1.19" (30.22 mm) 1492-15T Dimensions are not intended to be used for manufacturing purposes. 0.69" 1.5" (38.1 mm) (17.5 mm) Specifications Voltage Rating Maximum Current (per pole) Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Insulation Temperature Range 0.69" 1.88" (47.8 mm) (17.5 mm) High temperature 1-pole panel mount block, wire clamp. Gangable for multi-pole installation. High temperature 1-pole panel mount block, wire clamp. Gangable for multi-pole installation. 600V AC/DC 600V AC/DC 35 A 45 A #16…#12 AWG (1.5…4 mm2) #16…#10 AWG (1.5…6 mm2) 0.38" (9.7 mm) 0.38" (9.7 mm) 10…16 lb-in. (1.1…1.8 Nm) 10…16 lb-in. (1.1…1.8 Nm) –40…+300°F (–40…+149°C) –40…+300°F (–40…+149°C) Pcs./ Pkg. Cat. No. Pcs./ Pkg. Terminal Blocks Cat. No. Terminal Block 1492-15T 100 1492-25T 100 Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. Anchor Unit: (required every 12th block) 1492-15A 10 1492-25A 10 End Piece 1492-15E 25 1492-25E 25 Accessories (page 185) Accessories — Page 185 87 Bulletin 1492 Panel Mount Blocks 1492-ED103 2.25" (57.15 mm) 2.25" (57.15 mm) 1492-EC85 Dimensions are not intended to be used for manufacturing purposes. ➊ ➊ 3.13" (79.5 mm) 3.13" (79.5 mm) 1.25" (31.75 mm) Specifications Approvals (See Page 13) Voltage Rating Maximum Current (per pole) Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Insulation Temperature Range Terminal Blocks 1.25" (31.75 mm) 5-pole terminal block. Pulls apart to disconnect all poles from the circuit. 3-pole terminal block. Pulls apart to disconnect all poles from the circuit. /CSA /CSA 600V AC/DC 600V AC/DC 25 A 60 A #20…#12 AWG (0.75…4 mm2) #14…#4 AWG (2.5…25 mm2) 0.38" (9.7 mm) 0.38" (9.7 mm) 6…16 lb-in. (0.7…1.8 Nm) 10…30 lb-in. (1.1…3.4 Nm) –40…+221°F (–40…+105°C) –40…+221°F (–40…+105°C) Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. 1492-EC85 1 1492-ED103 1 Accessories (page 185) Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. Anchor Unit: (required every 12th block) Not Required — Not Required — End Piece Not Required — Not Required — Terminal Block: ➊ #8-32 screw. Accessories — Page 185 88