F E D C B A NOTES: C 78 +- 0,3 0 POS. 1 3,3 `0,3 6,35 `0,3 D (5:1) n0,6 `0,05 (62x) 0,4 12,33 +- 0,3 c 14,31 +- 0,4 0,3 3,6 +- 0,25 0 c 0 5,99 +- 0,3 0,4 15,61 +- 0,3 16,29 +- 0,4 0,3 18,7 +- 0,4 0,3 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER D 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 10. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 11. WASHERS: COPPER ALLOY; 80µin NICKEL 12. HEXLOCKING SCREWS: STAINLESS STEEL 13. FIXING-PLATE: PBT GF UL 94 V-0; BLACK 14. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 15. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 16. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 17. CONNECTOR IS PART MARKED: 15-00092o CONEC ABC C c 8,23 +- 0,25 0 63,5 `0,13 POS. 22 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 55,32 +- 0,23 0,02 21,1 +- 00,3 POS. 43 10° PRESS FOR FIXING ON PCB B 3,2 `0,2 METAL BRACKET FIXING PLATE B SEALING COMPOUND PCB SNAP O-RING 15-00092o CONEC ABC 4,6 4-40 UNC SEE NOTE 17 NAME: TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 4-40 UNC 9,4 c SW 4,8 tolerance dim. in mm date a Origin rev. description D 12.10.09 A drawn 17.10.08 Petker D-SUB HD MALE 90° 23.10.08 Fischer 62pos. SOLDER PIN ANGLED metal bracket, fixing-plate, hexlocking screw, snap dwg no: Inventor 10 DIN- HS part no: name C A3 sh: 1 15K1A322 R date see notes appd. d-old Ä3435 2:1 (5:1) title: name norm 4xc scale: material: B 15-00092 o (see note 9) A F E D C B A P.C.B. HOLE DRILLINGS 63,5 `0,13 D D 49,467 `0,05 2,413 `0,1 1,207 `0,1 24,714 `0,1 7,036 `0,03 b c b c P.C.B. EDGE 12,39 `0,1 b c 10,41 `0,1 + 0,1 n0,9 - 0 (62x) n3,1 `0,1 (2x) 8,43 `0,1 15,61 11,71 1 b c FRONTPANEL C C RECOMMENDED PANEL CUT-OUT 59,1 `0,1 i 0,26 A 11,4 `0,1 B COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL E DO NOT ALTER CAD DRAWING BY HAND TITLE: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F i 0,26 B 13 63,5 `0,1 CUSTOMER APPROVAL DATE: NAME: B `0 , APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 10° `1° APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A R3,4 n3,1 `0,05 (2x) B A tolerance dim. in mm date 4xc Ä 3435 12.10.09 HS Ä 3344 15.04.09 HS a Origin rev. description D A drawn 17.10.08 Petker P.C.B. HOLE DRILLINGS appd. 23.10.08 Fischer PANEL CUT-OUT D-SUB Male 62pos. HD Solder pin angled 90° dwg no: Inventor 10 DIN- d-old part no: name C A3 sh: 2 15K1A322 R date 3:1 see sheet 1 title: name norm 4xb scale: material: B see sheet 1 A