E D C n0,6 `0,05 (44x) b C 3,3 +- 0,5 0,3 D SEALING COMPOUND RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 47,04 `0,13 Pos. 16 38,86 +- 0,23 0,02 21,1 +- 0,3 0 Pos. 31 C 8,26 +- 0,22 0,03 61,4 +- 0,3 0 Pos. 1 (5:1) 6,35 `0,3 5,6 `0,3 8,14 `0,3 3,6 +- 0,25 0 10,68 `0,3 D 1. FOR WAVESOLDERING ( SOLDER BATH TEMPERATURE 240°C FOR 5 SEC. / AND SOLDER PREHEAT 120°C FOR 120 SEC. ) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.): o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/ 40-120µin NICKEL/ 120-200µin TIN 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1±0,1; PCB THICKNESS 1,6mm 8. COLLARS: COPPER ALLOY; NICKEL PLATED 9. HEXLOCKING SCREWS: STAINLESS STEEL 10. FRAME: ZINC DIE CAST; NICKEL PLATED 11. FIXING PLATE: PBT GF UL 94 V-0; BLACK 12. O-RING: SILICON; BLUE 13. RUBBER GASKET: TPE 14. SEALING COMPOUND: PUR; BLUE 15. P.C.B. HOLE DRILLINGS AND RECOMMENDED PANEL CUT-OUT ON SHEET 2 16. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.40Ncm (3.5 in.LB) 17. CONNECTOR IS PART MARKED: 6HDD44PoY99R40X CONEC ABC (see note 4) A 5,7 +- 00,31 NOTES: B max. 2 F 10° B METAL BRACKET 3,2 `0,2 PRESS FOR FIXING ON PCB FIXING PLATE B PCB SNAP 6HDD44PoY99R40X CONEC ABC 4-40 UNC b 9,9 `0,2 7,15 `0,2 O-RING SEE NOTE 10 4,6 9,4 SEE NOTE 17 SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATERTIGHT HOOD. Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 4-40 UNC scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date drawn 09.08.10 Henneboel D-SUB HD MALE 90° appd. 09.08.10 Fischer 44pos. SOLDER PIN ANGLED threaded insert, metal bracket, fixing-plate, snap dwg no: DIN- norm d-old 2xb Ä4784 a Original 11.06.13 A title: name 18K1A464 HS rev. description D date part no: name C A3 sh: 1 15K1A705 R 6HDD44PoY99R40X (see note 4) B A F E D C B A P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) D D 47,04 `0,13 33,147 `0,05 1,143 `0,1 7,01 `0,03 P.C.B. EDGE 3,3 `0,1 4,85 n0,9 +- 0,1 0 (44x) FRONTPANEL 2,54 `0,1 16,526 `0,1 2,54 `0,1 n3,1 `0,1 (2x) 10,75 2,286 `0,1 1 C C RECOMMENDED PANEL CUT-OUT 42,5 `0,1 i 0,26 A 11,4 `0,1 B 4 R3, n3,1 `0,1 (2x) B 10° `1° B i 0,26 B ,13 `0 47,04 `0,1 A F E DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH A scale: material: tolerance 3:1 see sheet 1 dim. in mm date A title: name drawn 09.08.10 Henneboel P.C.B. HOLE DRILLINGS appd. 09.08.10 Fischer PANEL CUT-OUT D-SUB Male 44pos. HD SOLDER PIN 90° dwg no: DIN- norm d-old Original rev. description D date part no: name C A3 sh: 2 15K1A705 R a B SEE SHEET 1 A