F E D C B A c NOTES: 61,4 +- 0,3 0 C (5:1) 0,4 8,6 +- 0,3 D 3,6 +- 0,25 0 c 0,17 6,13 +- 0,08 11,5 +- 0,4 0,3 12,13 +- 0,4 0,3 D 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 9. REAR SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1mm; PCB THICKNESS 1,6mm 10. HEXLOCKING SCREWS: STAINLESS STEEL 11. PCB-HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 13. CONNECTOR IS PART MARKED: 15-00055o CONEC ABC b 0,02 8 +- 0,23 c C 47,04 `0,13 21,1 +- 0,3 0 38,5 +- 00,25 10° n0,65 `0,05 (44x) b SEALING COMPOUND B O-RING B 15-00055o CONEC ABC 4,6 4-40 UNC 9,4 SEE NOTE 13 4-40 UNC SW 4,8 c TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. tolerance dim. in mm Ä 3435 25.09.09 HS 2xb Ä 3419 02.09.09 Lehm. a Origin rev. description D A title: name drawn 17.10.08 Schmidt D-SUB FEMALE HD appd. 23.10.08 Fischer 44pos. SOLDER PIN STRAIGHT with rear spacer clip and hexlocking screw dwg no: Inventor 10 DIN- d-old part no: name C A3 sh: 1 15K1A297 R date 2:1 (5:1) SEE DRAWING 15K1A297 date norm 4xc scale: material: B 15-00055o (see note 8) A F E D C B A P.C.B. HOLE DRILLINGS D D 33,147 `0,05 2,286 `0,1 16,637 `0,1 1,143 `0,1 1 1,98 `0,1 n3,1 `0,1 (2x) 1,98 `0,1 6,883 `0,03 + 0,1 n0,9 - 0 (44x) 47,04 `0,13 C C RECOMMENDED PANEL CUT-OUT 42,5 `0,1 i 0,26 A B B ,4 R3 n3,1 `0,05 (2x) 11,4 `0,1 B 10° `1° `0 ,13 TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 47,04 `0,1 A i 0,26 B A tolerance dim. in mm scale: material: A title: date name drawn 17.10.08 Schmidt P.C.B. HOLE DRILLINGS appd. 23.10.08 Fischer PANEL CUT-OUT D-SUB Female 44pos. HD Solder pin straight dwg no: Inventor 10 DIN- norm d-old Origin rev. description D date part no: name C A3 sh: 2 15K1A297 R a 5:1 see sheet 1 B see sheet 1 A