H G F E D C B A 44 `0,05 44 `0,05 88 F 37,6 `0,05 n2,6 F 33,4 `0,05 29,2 `0,05 37,7 `0,05 25 `0,05 32,65 `0,05 20,8 `0,05 27,6 `0,05 Pos. 46 and 47 5mm recessed 16,6 `0,05 12,4 `0,05 E E 8,2 `0,05 2,125 `0,05 B 2,7 `0,05 2,7 `0,05 (2x ) ,5 94 max. 2,125 `0,05 2,125 `0,05 1 4,1 `0,05 D 23x suggested hole size 6,8 `0,05 n3 D 0,8 see note 5 A +0 - 0 ,1 12,7 max. 0,625 4,75 0,8 0,2 `0,05 24x suggested hole size 3,9 6 2,125 `0,05 18,8 4 `0,05 9,5 `0,05 12,2 `0,05 Drilled hole n1,15 `0,025 (24x) 2 3 5 1 4 Drilled hole n1,75 `0,025 14,9 `0,05 20,3 `0,05 Copper thickness minimum 25µm Copper thickness minimum 25µm 23 `0,05 C C Tin thickness minimum 15µm Tin thickness minimum 15µm NOTES: (23x) 17,6 `0,05 1. MATERIALS AND FINISHES: - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 Finished hole + 0,09 n1 - 0,06 (24x) - CONTACTS: COPPER ALLOY, PLATING MATING AREA: 0,8 µM GOLD OVER NICKEL PLATING TERMINATION AREA: 0,8-1,5 µM TIN (SN 100) Finished hole + 0,09 n1,6 - 0,06 2. ELECTRICAL CHARACTERISTICS: A ( 10 : 1 ) CREEPING AND CLEARANCE DISTANCE; MINIMUM: B ( 10 : 1 ) PCB hole pattern - CONTACT 47 TO CONTACT 46: 2,5 MM (23x) - CONTACT 47 TO CONTACT 45: 3,2 MM - CONTACT 46 TO CONTACT 45: 3,2 MM - CONTACT 47 TO SIGNAL CONTACTS: 6,4 MM B - CONTACT 46 TO SIGNAL CONTACTS: 6,4 MM 24 20 1 2 1 quantity - CONTACT 45 TO SIGNAL CONTACTS: 2,0 MM CONTACT CURRENT RATING: - POWER CONTACTS POS. 45-47: 40 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - POWER CONTACTS POS. 1-20: 28 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - SIGNAL CONTACTS: 3 AMPERES NOMINAL INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH - SIGNAL CONTACTS: 0,004 OHM MAX. INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a VOLTAGE PROOF: - CONTACTS POS. 46, 46, 47: 3 kV r.m.s. - CONTACTS POS. 1-20: 1,5 kV r.m.s. - CONTACTS POS. 21-44: 1 kV r.m.s. 3. WORKING TEMPERATURE: -55°C TO +125°C 4. PRESS-FIT PART OF CONTACTS ARE PATENT PROTECTED 5. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC H G 5 4 3 2 1 item material dwg no. / norm partlist - POWER CONTACTS: 0,0007 OHM MAX. A Signal contact (Pos. 21-44) Power contact type 3 (Pos. 1-20) Power contact type 2 (Pos. 45) Power contact type 1 (Pos. 46-47) Case 47pos. female part description F E D C DO NOT ALTER CAD DRAWING BY HAND B finish: tolerance see notes ISO 2768-m 20.02.06 SOCKET CONNECTOR 47pos. Schmidt PRESS-FIT STRAIGHT CompactPCI Kühle norm dwg no: d-old date part no: name B Inventor 45K2A006 R rev. description 2:1 see notes title: name date drawn 20.02.06 appd. dim. in mm scale: material: A DINA2 sh: 1 CPH47W23FGE1SK9X A