H G F E D C B A PCB hole pattern NOTES: 1. MATERIALS AND FINISHES: - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 F F - CONTACTS: COPPER ALLOY, PLATING MATING AREA: FLASH GOLD OVER NICKEL 2x ) 33 - CONTACTS 27-34 TO ANY OTHER CONTACT WITHIN THIS GROUP: 1,4 MM - CONTACTS 13-16 TO 17-20: 3,0 MM 4,5 `0,05 ,65 A 13 4,5 `0,05 - CONTACT 25 TO 26: 5,5 MM 2 `0,05 n2 - CONTACTS 17-24 TO ANY OTHER CONTACT WITHIN THIS GROUP: 2,5 MM 46,1 max. 2,2 `0,05 6,6 `0,05 - CONTACTS 5-16 TO ANY OTHER CONTACT WITHIN THIS GROUP: 0,7 MM 3,9 `0,05 CREEPING AND CLEARANCE DISTANCE; MINIMUM SPACING: 6 `0,05 22x suggested hole size +0 - 0 ,1 ( PLATING TERMINATION AREA: 0,8-1,5 µM TIN (SN 100) 2. ELECTRICAL CHARACTERISTICS: - CONTACTS 21-24 TO 25-26: 4,0 MM B CONTACT CURRENT RATING: - POWER CONTACTS: 16 AMPERES MINIMUM, E TESTED PER CSA C22.2 NO. 182.3-M1987, ALL CONTACTS UNDER LOAD - SIGNAL CONTACTS: 0,0085 OHM MAX. INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a, METHOD A 17,5 max. 28,6 max. -0 1 ,75 + 0 , - POWER CONTACTS: 0,0022 OHM MAX. 13,7 `0,05 10 `0,05 18,5 `0,05 3. POSITIONS WITHOUT CONTACTS: 1, 2, 3, 4 4. WORKING TEMPERATURE: -55°C TO +125°C 12 `0,05 21,2 `0,05 5. PRESS-FIT PART OF CONTACTS ARE PATENT PROTECTED Contact 27 datum plane 8x suggested hole size 9,4 `0,05 n1 INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: 2,2 `0,05 - SIGNAL CONTACTS: 2 AMPERES NOMINAL 3,9 `0,05 3 `0,05 9,59 `0,05 E 20,9 max. - CONTACTS 25-26 TO 27-29: 2,0 MM 6. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC 14,5 `0,05 22,55 `0,05 23,9 `0,05 D D 26,6 `0,05 22,2 Drilled hole n1,15 `0,025 Drilled hole n1,75 `0,025 Contact 27 datum plane (22x) Copper thickness minimum 25µm 1,3 Copper thickness minimum 25µm Tin thickness minimum 15µm Tin thickness minimum 15µm C Finished hole + 0,09 n1,6 - 0,06 Finished hole + 0,09 n1 - 0,06 (22x) 4,75 see note 6 (8x) C (8x) B ( 10 : 1 ) A ( 10 : 1 ) B B 22 Signal contact (Pos. 5-24,27,32) 8 Power contact (Pos. 25,26,28-31,33,34) 1 Case 34pos. female quantity part description 3 2 1 item material dwg no. / norm 2 3 A H G F E D C DO NOT ALTER CAD DRAWING BY HAND 1 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH partlist finish: tolerance see notes ISO 2768-m drawn 15.04.05 appd. dim. in mm 15.04.05 PRESS-FIT STRAIGHT AdvancedTCA Kühle dwg no: d-old part no: name B Inventor 46K1A001 R date see notes S0CKET CONNECTOR 30pos. Mankopf norm rev. description 2,5:1 (10:1) title: name date scale: material: A DINA2 sh: 1 ATC30W08FGE3S5X A