F E D C B 20,7 A 35,5 1,5 29,9 C OF 17,4 5 23,6 REF. -U- C OF 20,2 C OF DATUM V GROUND CONTACTS P4 THRU P11 20,2 `0,1 39,6 REF. b D 17,4 REF. TYP D 2 PLC 18,62 3 -V- TOP SURFACE OF PCB ALIGNED WITH ROW B CONTACT C C C 3,2 `0,2 14,65 32,35 REF. 29,5 REF. 61 `0,2 47-100011 CONEC ABC NOTES: 22,2 1. Materials: A. Housing: Thermoplastic Polyester, glass filled Rated UL 94V-0, Color: Gray B. Contact: Copper Alloy, Gold plating 2. Finish: Mating area -- 0,76µm min. Gold over 1,27µm min. Nickel Compliant pin area -- 0,5µm min matte Tin over 1,27µm min. Nickel 3. Ratings: A. Voltage (Test voltage): 80V r.m.s. B. Current rating: Signal and Signal GND Conductor 0,625A/pin Power branch GND Conductor 11,625A/pin with derating of IEC 60512 C. Maximum line resistances: Signal and Signal GND Conductor 25 milli Ohms Power branch GND Conductor 5 milli Ohms 4. Engaging force: 145N max. Separating force: 110N max. 5. Durability: 200 mating cycles 6. Used Press Fit tool: 36-000080 7. Plated through-hole cross section and PC Board Dimensions see sheet 2 8. Connector is part marked: 47-100011 CONEC ABC see note 8 3,8 Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH B tolerance .X `0,30 X° `2° .XX `0,15 .X° `1° dim. in mm scale: material: 2:1 see notes A title: date name drawn 11.04.08 Lehmenkühler MicroTCA POWER CONNECTOR appd. 11.04.08 Koch MODULE VERSION norm dwg no: d-old 1xb Ä 3374 18.06.09 HS Origin rev. description D date part no: name C Inventor 10 DINA3 sh: 1 47K1A00003 R a B B 47-100011 A F E D C B A RECOMMENDED PC BOARD DIMENSIONS c 33 n0,60`0,05 TYP 3 D j n0,05 S X Y 11PLC P13 P24 4 7 PLC AFTER PLATING 1,5 6 PLC 2 D P12 1 9 A 5,5 2 8 PLC 16 1,5 A P1 -Y- 2,5 -X- 10,5 16 H PLATED THROUGH-HOLE CROSS SECTION C C b Dimensions A PCB Thickness B Plated Through Hole Diameter 0,60 `0,05mm C Drill Hole Diameter 0,70 `0,02mm D Cu Thickness Minimum 25µm E Plating Thickness Minimum 0,5µm Immersion Sn Minimum 1,4mm C B A B D E A F E DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH B scale: material: tolerance see sheet 1 dim. in mm name drawn 11.04.08 Lehmenkühler PC BOARD DIMENSIONS appd. 11.04.08 Koch PLATED THROUGH-HOLE CROSS SECTION MicroTCA POWER CONN. MODULE VERSION dwg no: Inventor 10 DIN- norm 1xc Ä 3850 21.12.10 1xb Ä 3374 18.06.09 a Origin A title: date Lehm. d-old HS rev. description D date part no: name C A3 sh: 2 47K1A00003 R B see sheet 1 A