H G F E D C A 44 `0,05 88 44 `0,05 F 37,25 `0,05 n2,6 F B 33 `0,05 28,75 `0,05 37,5 `0,05 24,5 `0,05 32,5 `0,05 20,25 `0,05 27,5 `0,05 Pos. 37 and 38 5mm recessed 16 `0,05 11,75 `0,05 E E 7,5 `0,05 2,5 `0,05 ) ( 3x +0 - 0 ,1 n3 ,3 +0 - 0 ,1 n3 ,5 12,7 max. 3 2 (15x) 12,25 `0,05 1 18,25 `0,05 C Tin thickness minimum 15µm 1. MATERIALS AND FINISHES: - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 - CONTACTS: COPPER ALLOY, PLATING: FLASH GOLD OVER NICKEL 22,25 `0,05 A ( 10 : 1 ) 2. ELECTRICAL CHARACTERISTICS: Tin thickness minimum 15µm 20,25 `0,05 Finished hole + 0,09 n1 - 0,06 (15x) (20x) Copper thickness minimum 25µm 16,25 `0,05 Copper thickness minimum 25µm NOTES: 2,125 `0,05 Drilled hole n1,75 `0,025 10,25 `0,05 14,25 `0,05 see note 3 2,125 `0,05 20x suggested hole size 6,25 `0,05 8,25 `0,05 Drilled hole n1,15 `0,025 4 D ,1 +0 0 - 94 max. B 4,25 `0,05 ,5 Crimp contacts (3x) must be ordered separately 2,5 `0,05 0,8 1 n3 D see note 6 1 `0,05 A 3,9 0,625 2,125 `0,05 6 2,125 `0,05 18,8 3,25 `0,05 15x suggested hole size Finished hole + 0,09 n1,6 - 0,06 C (20x) B ( 10 : 1 ) PCB hole pattern CREEPING AND CLEARANCE DISTANCE; MINIMUM: - CONTACT 38 TO CONTACT 37: 2,5 MM - CONTACT 38 TO CONTACT 36: 3,2 MM - CONTACT 37 TO CONTACT 36: 3,2 MM B B - CONTACT 38 TO SIGNAL CONTACTS: 6,4 MM - CONTACT 37 TO SIGNAL CONTACTS: 6,4 MM - CONTACT 36 TO SIGNAL CONTACTS: 2,0 MM 3 15 20 1 quantity CONTACT CURRENT RATING: - POWER CONTACTS POS. 36-38: 40 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - POWER CONTACTS POS. 1-20: 28 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - SIGNAL CONTACTS: 5 AMPERES NOMINAL - SIGNAL CONTACTS: 0,004 OHM MAX. INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a, METHOD A 3. CONTACTS (3x) ARE CRIMP, REMOVABLE AND ORDERED SEPARATELY 4. WORKING TEMPERATURE: -55°C TO +125°C 5. PRESS-FIT PART OF CONTACTS ARE PATENT PROTECTED 6. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC G F E D C DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH - POWER CONTACTS: 0,0007 OHM MAX. H material dwg no. / norm partlist INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: A 4 3 2 1 item Crimp contact (Pos. 36-38) see note 3 Signal contact (Pos. 21-35) Power contact (Pos. 1-20) Case 38pos. female part description finish: tolerance see notes ISO 2768-m 12.07.05 FEMALE CONNECTOR 38pos. Mankopf CRIMP LOW + PRESS-FIT, STRAIGHT CompactPCI Kühle norm dwg no: d-old date part no: name B Inventor 45K1A029 R rev. description 2:1 see notes title: name date drawn 12.07.05 appd. dim. in mm scale: material: DINA2 sh: 1 CPH38W23FGE3SN9X A A