G F E D C B A 23,75 `0,05 n1,6 (11x) n0,65 (15x) F + 0,1 n3,5 - 0 (2x) 18,95 `0,05 13,9 `0,05 8,85 `0,05 2,6 2,7 `0,05 2,7 `0,05 4,25 `0,05 1,55 `0,05 2,125 `0,05 12,7 max. 53,54 23,75 `0,05 7,96 `0,05 F 2,125 `0,05 H E 47,5 1 2,125 `0,05 2,125 `0,05 E n2,03 `0,1 (11x) n1,14 `0,1 (15x) Pos.7 Last Mate Signal 1,15 `0,05 6,55 `0,05 10,45 `0,05 7,8 17,6 10,085 3,85 `0,05 D D 14,65 `0,05 PCB hole pattern PCB TOP SIDE 18,85 `0,05 n2,6 (2x) 7 5 4 1 3 C NOTES: 8 1. MATERIALS AND FINISHES: - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 - CONTACTS: COPPER ALLOY, PLATING: 0,8 µM GOLD OVER NICKEL 2. ELECTRICAL CHARACTERISTICS: B CONTACT CURRENT RATING: - POWER CONTACTS POS. 22-26: 28 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - POWER CONTACTS POS. 1-6: 28 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - SIGNAL CONTACTS: 3 AMPERES NOMINAL INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: - POWER CONTACTS: 0,0007 OHM MAX. - SIGNAL CONTACTS: 0,004 OHM MAX. CPD26W11MARCSK9X CONEC ABC INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a, METHOD A VOLTAGE PROOF: - CONTACTS POS. 22-26: 1,5 kV r.m.s. - CONTACTS POS. 1-6: 1,5 kV r.m.s. SEE NOTE 5 A - CONTACTS POS. 7-21: 1 kV r.m.s. 3. WORKING TEMPERATURE: -55°C TO +125°C 4. ORDER OF CONTACT MATING: LAST MATE: POS.7 5. CONNECTOR IS PART MARKED: CPD26W11MARCSK9X CONEC ABC H G F E D 8 7 6 5 4 3 2 1 item 1 6 5 4 5 5 1 1 quantity C DO NOT ALTER CAD DRAWING BY HAND 2 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 6 C Fixing plate Power contact type 1 (Pos. 2,4,6,23,25,26) Power contact type 3 (Pos. 1,3,5,22,24) Signal contact type 3 (Pos. 10,13,16,19) Signal contact type 2 (Pos. 8,11,14,17,20) Signal contact type 1 (Pos. 9,12,15,18,21) Signal contact type 4 (Pos. 7) Case 26W11 male angled part descripion partlist B tolerance dim. in mm date name drawn 18.02.10 Schmidt appd. 18.02.10 Koch PLUG CONNECTOR 26W11 SOLDER PIN ANGLED, STANDARD Compact PCI dwg no: d-old Origin date part no: name B Inventor 10 45K2A050 R a 2:1 see notes title: norm rev. description material dwg no. / norm scale: material: DINA2 sh: 1 CPD26W11MARCSK9X A A