F E D C B 4,62 `0,2 A 7,5 `0,3 (5:1) 7,28 `0,3 10,12 `0,3 D 12,96 `0,3 D 0,31 61,11 +- 0,13 0,12 52,5 +- 0,05 0,2 10,82 +- 0,05 0,2 0,36 15,39 +- 0,4 C 0,17 6,13 +- 0,08 0,8 67 +- 0,45 C n0,64 `0,05 (41x) 10° 4-40 UNC B 10,03 `0,3 3043W2SAT99N20X CONEC ABC REF. 15,8 n3,18 (2x) 15 max. METAL BRACKET see note 9 B NOTES: 1. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 2. INSULATORS: PBT GF UL 94 V-0; GREEN 3. SIGNAL CONTACTS: COPPER ALLOY PLATING: 8µin HARD GOLD over min. 50µin NICKEL 4. NO CONTACTS ON POS. A1 + A2 5. METAL BRACKETS: STEEL; min. 320µin TIN over 80µin NICKEL 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. P.C.B. HOLE DRILLINGS ON SHEET 2 8. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 9. CONNECTOR IS PART MARKED: 3043W2SAT99N20X CONEC ABC tolerance dim. in mm scale: material: A title: name drawn 23.06.10 Schmidt D-SUB COM. FEMALE 90° appd. 23.06.10 Koch 43W2S with threaded insert and metal bracket dwg no: Inventor 10 DIN- d-old Origin rev. description date part no: name C A3 sh: 1 13K2A2298 R D see notes date norm a 2:1 (5:1) B 3043W2SAT99N20X A F E D C B A D D 61,11 +- 0,13 0,12 20,7 `0,1 17,96 `0,1 15,19 `0,1 12,42 `0,1 9,68 `0,1 6,91 `0,1 4,14 `0,1 C n3,1 `0,1(2x) 10,83 1,4 `0,1 8,08 `0,1 P.C.B. EDGE 2,77 `0,1 5,54 `0,1 2,84 `0,1 + 0,1 n1 - 0 (41x) 1 2,84 `0,1 C 8,28 `0,1 11,05 `0,1 13,82 `0,1 16,56 `0,1 B B 19,33 `0,1 P.C.B. TOP SIDE TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 22,1 `0,1 tolerance dim. in mm scale: material: A title: date name drawn 23.06.10 Schmidt P.C.B. HOLE DRILLINGS appd. 23.06.10 Koch D-SUB COMBINATION MALE 90° 43W2S with threaded insert and metal bracket dwg no: Inventor 10 DIN- norm d-old Origin rev. description D date part no: name C A3 sh: 2 13K2A2298 R a 2:1 see sheet 1 B see sheet 1 A