F E D C b B d C 47,7 +- 0,3 0 4,85 `0,3 6,35 `0,3 D 10,23 +- 0,4 0,3 (5:1) 10,75 +- 0,4 0,3 3,6 +- 0,25 0 d 0,12 6 +- 0,18 13,07 +- 0,4 0,3 13,5 +- 0,4 0,3 1. FOR WAVESOLDERING (SOLDER BATH TEMERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE D 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 10. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 11. WASHERS: COPPER ALLOY; 80µin NICKEL 12. HEXLOCKING SCREWS: STAINLESS STEEL 13. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 14. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 15. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 16. CONNECTOR IS PART MARKED: 15-00074o CONEC ABC n0,6 `0,05 (15x) NOTES: 8,23 +- 0,25 0 C RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR d 33,32 +- 0,13 0,12 POS. 1 A 25,14 +- 0,23 0,02 21,1 +- 00,3 POS. 9 10° METAL BRACKET B 3,2 `0,2 PRESS FOR FIXING ON PCB B SEALING COMPOUND O-RING 15-00074o CONEC ABC PCB SNAP 4,6 4-40 UNC b 9,4 SEE NOTE 16 d TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 4-40 UNC A SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. tolerance dim. in mm Ä 3435 02.10.09 HS 3xb Ä 3129 26.09.08 Petker a Origin rev. description D see notes A title: name drawn 12.09.08 Schmidt D-SUB MALE 90° appd. 15.09.08 Fischer 15pos. SOLDER PIN ANGLED with metal bracket, hexlocking screw and snap dwg no: Inventor 10 DIN- d-old part no: name C A3 sh: 1 15K1A256 R date 2:1 (5:1) date norm 4xd scale: material: B 15-00074 o (see note 9) b A F E D C B A P.C.B. HOLE DRILLINGS 33,32 +- 0,13 0,12 9,6 `0,1 D D 6,86 `0,1 4,11 `0,1 2,74 `0,1 c P.C.B. EDGE d 2,84 `0,1 + 0,1 n1 - 0 (15x) 6,85 10,75 1,37 `0,1 1 6,33 `0,1 n3,1 `0,1 (2x) c d C C FRONTPANEL 5,49 `0,1 8,23 `0,1 RECOMMENDED PANEL CUT-OUT b 28,8 `0,1 i 0,26 A B B ,4 ` R3 n3,1 `0,05 (2x) 11,4 `0,1 B 10° `1° i 0,26 B 0,1 3 TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 33,32 `0,1 A tolerance dim. in mm 2xd Ä 3435 02.10.09 15.04.09 HS Ä 3129 26.09.08 Petker a Origin rev. description D drawn 12.09.08 Schmidt P.C.B. HOLE DRILLINGS appd. 15.09.08 Fischer PANEL CUT-OUT D-SUB Male 15pos. Solder pin angled 90° dwg no: Inventor 10 DIN- d-old Ä 3344 A title: name norm 2xc part no: name C A3 sh: 2 15K1A256 R date 5:1 see sheet 1 date HS 1xb scale: material: B see sheet 1 A