F E D C d 61,4 +- 0,3 0 C A 4,74 `0,3 6,35 `0,3 D 10,21 +- 0,4 0,3 (5:1) 3,6 +- 00,25 d 6,13 +- 0,17 0,08 10,75 +- 0,4 0,3 0,4 13,5 +- 0,3 13,05 +- 0,4 0,3 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 9. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 10. WASHERS: COPPER ALLOY; 80µin NICKEL 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 13. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 14. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 15. CONNECTOR IS PART MARKED: 15-00079o CONEC ABC n0,6 `0,05 (25x) NOTES: D B 0,02 8 +- 0,23 d C 47,04 `0,13 21,1 +- 0,3 0 38,5 +- 00,25 10° PRESS FOR FIXING ON PCB 3,2 `0,2 METAL BRACKET SEALING COMPOUND B O-RING B PCB SNAP 15-00079o CONEC ABC 4,6 4-40 UNC 9,4 SEE NOTE 15 d COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND TITLE: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: NAME: SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 4-40 UNC tolerance dim. in mm a Origin rev. description D 05.10.09 A title: drawn 17.10.08 Schmidt D-SUB FEMALE 90° appd. 23.10.08 Fischer 25pos. SOLDER PIN ANGLED with metal bracket, hexlocking screw and snap dwg no: Inventor 10 DIN- HS part no: name C A3 sh: 1 15K1A300 R date see notes name d-old Ä3435 2:1 (5:1) date norm 4xd scale: material: B 15-00079o (see note 8) A F E D C P.C.B. HOLE DRILLINGS B A 47,04 `0,13 16,56 `0,1 D D 13,82 `0,1 11,05 `0,1 8,28 `0,1 5,54 `0,1 1,4 `0,1 4,14 `0,1 P.C.B. EDGE b 2,84 `0,1 c d 1 C 6,31 `0,1 C 2,77 `0,1 + 0,1 n1 - 0 (25x) 6,85 10,75 n3,1 `0,1 (2x) FRONTPANEL 6,91 `0,1 c d 9,68 `0,1 12,42 `0,1 15,19 `0,1 RECOMMENDED PANEL CUT-OUT 42,5 `0,1 i 0,26 A B B ,4 R3 n3,1 `0,05 (2x) 11,4 `0,1 B 10° `1° `0 ,13 TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 47,04 `0,1 A i 0,26 B A tolerance dim. in mm drawn 17.10.08 Schmidt P.C.B HOLE DRILLINGS appd. 23.10.08 Fischer PANEL CUT-OUT D-SUB Female 25pos. Solder pin angled dwg no: Inventor 10 DIN- 05.10.09 HS norm d-old Ä 3344 15.04.09 HS Ä 3327 30.03.09 HS a Origin rev. description D A title: name Ä 3435 2xc part no: name C A3 sh: 2 15K1A300 R date 4:1 see sheet1 date 2xd 1xb scale: material: B see sheet 1 A