TouchPower™ Series Ku-Band 750 W Touchscreen TWTA Compact and Efficient Provides 750 watts of power in a 5 rack unit package, digital ready, for wideband, single- and multi-carrier satellite service in the 13.75 to 14.50 or 12.75 to 14.50 GHz frequency range, with other frequency ranges available as well. Ideal for transportable and fixed earth station applications where space and prime power are at a premium. CAN-Bus architecture improves noise immunity and reliability. Touchscreen Graphical Interface State of the art touchscreen interface with both amplifier and/or system level control capabilities. Includes fault logs, parameter trending and scopescreen for monitoring performance. Internal switch control eliminates need for external controllers. Global Applications Meets International Safety Standard EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy world requirements. Easy to Maintain Modular design and built-in fault diagnostic capability with convenient and clearly visible indicators for easy maintainability in the field. A USB port is available for uploading new firmware and system configurations, and downloading logs and system configurations for cloning to other units. Worldwide Support Models T5UI 750 watt Ku-band Touchscreen TWTA for satellite uplink applications OPTIONS •Integral linearizer •Remote control panel •Redundant and power combined sub-systems •External receive band reject filter (increases loss by a minimum of 75 dB up to 12.75 GHz) •SNMP compatibility •LifeExtenderTM/LifePredictor •High altitude/temperature kit •L-band block upconverter (BUC) --specifications for when BUC is included are not contained in this document. Contact CPI for details. •Multi-band block upconverter (BUC) --specifications for when BUC is included are not contained in this document. Contact CPI for details. Backed by over 35 years of satellite communications experience, and CPI’sworldwide 24-hour customer support network that includes more than 20 regional factory service centers. Touchscreen TWTA Sample Redundancy System Schematic Display; Various Configurations Available 811 Hansen Way, PO Box 51625 Palo Alto, CA 94303 USA tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail:[email protected] website:www.cpii.com/satcom Ku-Band Specifications 750 W Ku-Band TouchPower Touchscreen TWTA TM Specification Model T5UI std. band Model T5UI ext. band Output Frequency 13.75 to 14.50 GHz 12.75 to 14.50 GHz 750 W (58.75 dBm) min. 665 W (58.25 dBm) min. 750 W (58.75 dBm) min. 665 W (58.25 dBm) min. Output Power (min.) TWT Flange (Psat, CW) Gain RF Level Adjust Range Gain Stability Over temp, constant drive Over ±10˚C , constant drive 70 dB min. at rated power, 80 dB max; 70 dB min. at small signal, 75 dB max. 0 to 30 dB (via PIN diode attenuator), 0.1 dB steps ±0.25 dB/24 hour max,max. at constant drive and temperature, after 30 minute warmup 2.0 dB pk-pk max. at 48 dBm output power 1.5 dB pk-pk max. at 48 dBm output power Small Signal Gain Slope Small Signal Gain Variation ±0.04 dB/MHz max. 1.0 dB pk-pk max. across any 80 MHz; 2.5 dB pk-pk max. across 750 MHz; 4.5 dB pk-pk max. across 1750 MHz Input/Output VSWR 1.3:1 max. Load VSWR 2.0:1 continuous operation; 1.5:1 for full spec. compliance; any value operation without damage Phase Noise -12 dB IESS-308/309 phase noise profile; -52 dBc AC fundamentals; -50 dBs sum of spurs (370 Hz to 1 MHz) AM/PM Conversion Harmonic Output Noise Density NPR Intermodulation - with respect to each or two equal carriers 5 MHz apart 2.5˚/dB max. for a single-carrier at 6 dB below rated power. Improves to 2.0˚/dB typ. at 3 dB OBO with optional linearizer -70 dBc at rated power, second and third harmonics <-150 dBW/4 kHz, 10.70 to 12.75 GHz; <-75 dBW/4 kHz passband; <72 dBW/4 kHz passband with linearizer option -19 dB at 4 dB OBO with optional linearizer -23 dBc or better at 51.13 dBm; -26 dBc or better at 55.25 dBm with linearizer Spectral Regrowth -30 dBc at 1 symbol rate at 3 dB OBO with optional linearizer, QPSK and OQPSK Group Delay 0.01 ns/MHz linear max; 0.005 ns/MHz2 parabolic max; 0.5 ns pk-pk ripple max. Primary Power Power Consumption Voltage: Single phase, 208-240 VAC ±10%; Frequency: 47-63 Hz, 15 A max. 2.2 kVA typ. at Psat; 2.4 kVA max; 1.8 kVA typ. at PLIN Power Factor 0.95 min; 0.99 typ. Inrush Current Ambient Temperature 200% max. -20˚C to +60˚C operating, -40˚C to +70˚C non-operating Relative Humidity Altitude Shock and Vibration Cooling Connections M&C Interface 95% non-condensing 10,000 ft. with standard adiabatic derating of 2˚C/1000 ft. operating; 50,000 ft. non-operating Designed for normal transportation environment per section 514.4 MIL-STD-810G. Designed to withstand 20G at 11 ms (1/2 sine pulse in non-operating condition) Forced Air with integral blower. Rear air intake and exhaust. Maximum external pressure loss allowable: 0.5” water column RF Input: Type N Female; RF output: WR-75 waveguide flange; RF output monitor: Type N Female RJ45 Ethernet, includes embedded GUI control; RS422/485, RS232 serial interface USB Port Dimensions, W x H x D Download/Upload software, logs 19 x 8.75 x 24 inches (483 x 222 x 610 mm) Weight 78 lbs (35 kg) nom. Heat Dissipation 1,440 watts to duct; 360 watts to room Acoustic noise 68 dBA (as measured at 3 ft.) nom. Quality Management System - ISO 9001:2008 For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 362, ISSUE 10 dated MAR 2015