TouchPower™ Series DBS-Band 750 W Touchscreen TWTA Compact, Efficient, Reliable Provides 750 watts of power in a 5 rack unit package, digital ready, for wideband, single- and multi-carrier satellite service within the 17.3 to 18.4 GHz frequency range. Ideal for transportable and fixed earth station applications where space and prime power are at a premium. CAN-Bus architecture improves noise immunity and reliability. Touchscreen Graphical Interface State of the art touchscreen interface with both amplifier and/or system level control capabilities. Includes fault logs, parameter trending and scopescreen for monitoring performance. Internal switch control eliminates need for external controllers. Global Applications Meets International Safety Standard EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy world requirements. Easy to Maintain Modular design and built-in fault diagnostic capability with convenient and clearly visible indicators for easy maintainability in the field. A USB port is available for uploading new firmware and system configurations, and downloading logs and system configurations for cloning to other units. Models T5DI 750 watt DBS-band Touchscreen TWTA for satellite uplink applications OPTIONS •Integral linearizer •Remote control panel •Redundant and power combined sub-systems •External receive band reject filter (increases loss by a minimum of 75 dB up to 12.75 GHz) •SNMP compatibility •LifeExtenderTM/LifePredictor •High altitude/temperature kit •L-band block upconverter (BUC) --specifications for when BUC is included are not contained in this document. Contact CPI for details. •17.3 - 17.8 GHz and 17.3 - 18.1 GHz operation Worldwide Support Backed by over 35 years of satellite communications experience, and CPI’sworldwide 24-hour customer support network that includes more than 20 regional factory service centers. Touchscreen TWTA Sample Redundancy System Schematic Display; Various Configurations Available 811 Hansen Way, PO Box 51625 Palo Alto, CA 94303 USA tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail:[email protected] website:www.cpii.com/satcom DBS-Band Specification Output Frequency Output Power (min.) TWT Saturated (Psat, CW) Gain RF Level Adjust Range Gain Stability Over temp, constant drive Over ±10˚C , constant drive Small Signal Gain Slope Small Signal Gain Variation Specifications 750 W DBS-Band TouchPowerTM Touchscreen TWTA Model T5DI std. band Model T5DI ext. band 17.3 to 18.1 GHz 17.3 to 18.4 GHz 750 W (58.75 dBm) min. 630 W (58.00 dBm) min. 750 W (58.75 dBm) min. 630 W (58.00 dBm) min. 70 dB min. at rated power, 80 dB max; 70 dB min. at small signal, 85 dB max. 0 to 30 dB (via PIN diode attenuator), 0.1 dB steps ±0.25 dB/24 hour max,max. at constant drive and temperature, after 30 minute warmup 2.0 dB pk-pk max. over operating temperature range, at 48 dBm output power 1.5 dB pk-pk max, at 48 dBm output power ±0.04 dB/MHz max. at 48 dBm output power 1.0 dB pk-pk max. over any 80 MHz; 3.5 dB pk-pk max. over 800 MHz (4.0 dB pk-pk max. over 800 MHz with linearizer) Input/Output VSWR 1.0 dB pk-pk max. over any 80 MHz; 4.0 dB pk-pk max. over 1100 MHz (4.5 dB pk-pk max. over 1100 MHz with linearizer) 1.3:1 max. Load VSWR 2.0:1 continuous operation; 1.5:1 for full spec. compliance; any value operation without damage Phase Noise -12 dB IESS-308/309 phase noise profile; -42 dBc AC fundamentals; -50 dBc sum of spurs (370 Hz to 1 MHz) AM/PM Conversion Harmonic Output Noise Density 2.5˚/dB max. for a single-carrier at 6 dB below rated power. Improves to 2.0˚/dB typ. at 3 dB OBO with optional linearizer -70 dBc at rated power, second and third harmonics <-150 dBW/4 kHz, 10.70 to 12.75 GHz; <-75 dBW/4 kHz passband; <72 dBW/4 kHz passband with linearizer option NPR -19 dBc at 4 dB OBO with optional linearizer Intermodulation - with respect to each of two equal carriers 5 MHz apart -24 dBc or better at 51.0 dBm output power; -26 dBc or better at 54.0 dBm with linearizer Spectral Regrowth -30 dBc at 1 symbol rate at 3 dB OBO with optional linearizer, QPSK and OQPSK Group Delay 0.01 ns/MHz linear max; 0.005 ns/MHz2 parabolic max; 0.5 ns pk-pk ripple max. Primary Power Power Consumption Voltage: Single phase, 208-240 VAC ±10%; Frequency: 47-63 Hz, 15 A max. 2.2 kVA typ. at Psat; 2.3 kVA max; 1.8 kVA typ. at PLIN Power Factor 0.95 min; 0.99 typ. Inrush Current 200% max. Ambient Temperature -20˚C to +60˚C operating, -40˚C to +70˚C non-operating Relative Humidity Altitude Shock and Vibration Cooling Connections M&C Interface 95% non-condensing 10,000 ft. with standard adiabatic derating of 2˚C/1000 ft. operating; 50,000 ft. non-operating Designed for normal transportation environment per section 514.4 MIL-STD-810G. Designed to withstand 20G at 11 ms (1/2 sine pulse in non-operating condition) Forced Air with integral blower. Rear air intake and exhaust. Maximum external pressure loss allowable: 0.5” water column RF Input: Type SMA Female; RF output: WR-62G waveguide flange; RF output monitor: Type SMA Female RJ45 Ethernet, includes embedded GUI control; RS422/485, RS232 serial interface USB Port Dimensions, W x H x D Download/Upload software, logs 19 x 8.75 x 24 inches (483 x 222 x 610 mm) Weight 78 lbs (35 kg) nom. Heat Dissipation 1,440 watts to duct; 360 watts to room Acoustic noise 68 dBA (as measured at 3 ft.) nom. Quality Management System - ISO 9001:2008 For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 368, ISSUE 7 dated AUG 2015