Beverly Microwave Division 150 Sohier Road • Beverly, MA 01915 Phone: +1(978) 922-6000 • Email: [email protected] www.cpii.com/bmd L-Band GaN High Power Solid State Power Amplifier VSL3606 Features: • Frequency range of 1.2 – 1.4 GHz • 700 Watt modules with ALC • 1.3 kW to 10 kW amplifiers are available by power combining modules • BIT and controls via EIA-422 remote connection Benefits: • High efficiency GaN transistors • High gain with automatic level control • Air cooled • High reliability CPI-Built RF Bricks CPI’s Solid State Power Amplifiers are highly efficient and easy to maintain. The CPI Solid State Power Amplifiers are designed for use in radar applications and cover the 1.2 – 1.4 GHz frequency band. Gallium nitride transistors are combined into 700 W bricks which are air cooled. The 700 W bricks can be power-combined using radial combiners and waveguide combiners. . L-band Solid State Power Amplifiers – Efficient, high power, and compact with proven GaN transistor technology. Optimized for search and air traffic control radar. •• Solid Power Amplifiers Amplifiers• •Integrated IntegratedMicrowave Microwave Assemblies Solid State State Power Assemblies ••Receiver Protectors • Control Components • Transmitters • Amplifiers Receiver Protectors • Control Components • Transmitters • Amplifiers •• Modulators • Magnetrons • Crossed Field Amplifiers Modulators • Magnetrons • Crossed Field Amplifiers • Ring Loop Loop Traveling TravelingWave WaveTubes Tubes• •Power PowerCouplers Couplers Beverly Microwave Division www.cpii.com/bmd L-Band GaN Solid State Power Amplifier - VSL3606 Electrical and Mechanical Characteristics Frequency Range Maximum Saturated RF Output Power Overall Efficiency Small Signal Gain Output Power Flatness over frequency range Duty Cycle Prime Power Cooling RF Input Connection RF Output Connection RF Output Monitor Dimensions Max. Weight 1.2 to 1.4 GHz 700 W 45% 55 dB 1 dB 1% up to 50% 48VDC @ 3.5 amps (at 10%) Forced air SMA female Type N female Control connector 12 in x 2.15 in x 16.5 in (30.48cm x 5.461cm x 41.91cm) 15 lbs. (6.804kg) The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products visit our webpage at www.cpii.com/bmd, or contact: CPI Beverly Microwave Division, Telephone: +1 (978) 922-6000 • FAX: +1 (978) 922-8914 • Email: [email protected] Rev. 7/15