GaN Solid State Power Amplifiers FEATURES L- Band Typical Operating Parameters Item Value Units Frequency 1.2-1.4 GHz Peak Power 700 W Average Power 700 kW • High efficiency GaN • BIT and controls via EIA-422 remote connection • Phase matched for power combining • Novel power combining techniques • Cabinet mount enclosures • Phased array radar modules L-band SSPA • 700 watt CW & pulsed modules S-band SSPA • 1.3 kW pulsed modules • Up to 25kW Power combined C-band SSPA • New design effort (2014) • 1 kW watt pulsed modules X-band SSPA • 900 watt pulsed modules S-Band 1.3KW SSPA S-Band Typical Operating Parameters Item Value Units Frequency 2.7 – 2.9 GHz Frequency GHz (In design) 2.9-3.1 / 3.1-3.5 Peak Power 1.3 kW Duty 10 % Duty (in design) 20 % The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products visit our webpage at www.cpii.com, or contact CPI Beverly Microwave Division, 150 Sohier Road, Beverly, MA 01915 Telephone: 1 (978) 922-6000 FAX: 1 (978) 922-8914 email: [email protected] CPI │ GaN SSPA CPI Beverly Microwave Division is now building solid state power amplifiers using gallium nitride (GaN) transistors for L,S,C & X-band. Solid State GaN Transmitter X-Band Typical Operating Parameters Item Value Units Item Value Units Frequency 5.4-5.9 GHz Frequency 8.8-9.6 GHz Peak Power 1 kW Peak Power 900 W Duty 10 % Duty 10 % X Band SSPA Power Combining Schemes For information on this and other CPI products visit our webpage at www.cpii.com, or contact CPI Beverly Microwave Division, 150 Sohier Road, Beverly, MA 01915 Telephone: 1 (978) 922-6000 FAX: 1 (978) 922-8914 email: [email protected] CPI │ GaN SSPA C-Band Typical Operating Parameters