VIL410

Beverly Microwave Division
150 Sohier Road • Beverly, MA 01915
Phone: +1(978) 922-6000 • Email: [email protected]
www.cpii.com/bmd
IOT Transmitter - VIL410
Features:
• 30 kW CW, 1.3 GHz
• Liquid cooled
• GaN Solid State Power Amplifier Driver
• Four port circulator (optional)
• Superior stability, phase and amplitude ripple
Benefits:
• Highest CW power amplifier
• User friendly control and operation
• Compatible with EPICS interface
• Fully protected from RF output short/open
(with 4-port circulator)
This high power amplifier utilizes the CPI
BMD VKL9130A1 IOT and the CPI BMD
VSL3616 GaN SSPA and highly stable power
supply for high gain, high efficiency and
excellent phase and amplitude stability.
Applications:
• Superconducting RF
accelerators
VIL410 with 4 port circulator
•• Solid
Power Amplifiers
Amplifiers• •Integrated
IntegratedMicrowave
Microwave
Assemblies
Solid State
State Power
Assemblies
••Receiver
ControlComponents
Components• •Transmitters
Transmitters
• Amplifiers
Receiver Protectors
Protectors •• Control
• Amplifiers
•• Modulators
Magnetrons• •Crossed
CrossedField
FieldAmplifiers
Amplifiers
Modulators •• Magnetrons
• Ring Loop
Loop Traveling
TravelingWave
WaveTubes
Tubes• •Power
PowerCouplers
Couplers
Beverly Microwave Division
IOT Transmitter - VIL410
Specifications
Frequency Range
1.2975 to 1.3025 GHz
RF Output
30 kW CW nominal, adjustable
from 2 kW to 30 kW
Duty cycle
CW and pulsed
Power Gain
72 dB minimum
Output VSWR
SNR
6:1 maximum
-70 dBc minimum
Prime Power
Specifications
Ambient Temperature
Current draw
Shock and Vibration
0.2%/20 seconds with constant
RF input with coolant +/- 0.2ºC
Cooling
Amplitute ripple*
0.1% rms after 20 minute warm
up, coolant +/- 0.2ºC
0.2º maximum
RF Input Connection
Phase pushing
0.2%/20 seconds with constant
RF input with coolant +/- 0.2ºC
* Stability and Ripple measurements are specified after
warm-up is complete and are dependent upon ambient and
coolant conditions being well controlled.
+15°C to +25°C operating
Current (service rating)
Amplitude stability*
Phase ripple*
380 VAC (3phase with
neutral) 50/60 Hz
RF Output Connection
Control I/O
Dimensions (width)
200 A
122 Arms
Ground benign (typical
transportation)
Water, +20 to +35°C, 18 GPM
(restricted temperature range
for tighter stability)
N-Type female- front panel
WR650 waveguide
Ethernet
73 in (185 cm) 172 inches
max with circulator
Dimensions (height)
81 in (206 cm)
Dimensions (depth)
37 in (94 cm) 41 inches max
with circulator
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
pg.2
For information on this and other CPI products visit our webpage at www.cpii.com/bmd, or contact:
CPI Beverly Microwave Division, Telephone: +1 (978) 922-6000 • FAX: +1 (978) 922-8914 • Email: [email protected] Rev. 6/16