TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC PARAMETER MIN. INDUCTANCE (1-2). 0.40 Vrms @ 100 KHz. 1067 FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. MAX. 1 UNITS 1186 1305 H -------- 7.0 H PRIMARY 1/2 3 LEAKAGE IND (1-2) with 7-12 shorted. -------0.40 Vrms @ 100 KHz PRIMARY 2/2 2 TURN RATIO 1-2 : 7-11 1-2 : 4-5 1-3 : 8-12 RESONANT FREQUENCY (1-2). All other windings remain open. 11, 12 ---------------------- 4:1 6.22 : 1 2:1 ---------------------- +3% +3% +3% 1700 -------- --------- KHz 4 SECONDARY 7, 8 BIAS 5 HI-POT: 60 Hz for 1 sec. PRIMARY and BIAS to SECONDARY 3000 -------- -------- Vrms FIGURE 2: PHYSICAL DIMENSIONS IN INCHES ( mm) 12 11 P M PIN #1 WHITE DOT 1 10 9 8 7 5 6 PNK-10015 YYWW 2 3 4 1.58 (40.0) MAX 1.33 (33.8) MAX 1.35 (34.29) MAX .15 (3.81) MIN .200 (5.1) PIN #1 I.D. 1 0.025 (0.64) SQ. or 0.031 (0.8) Dia. 12-PLACES .0.297 (7.55) 2 3 4 5 6 NOTES: 1.20 (30.55) 12 11 10 9 8 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements of UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. 7 RoHS UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN Inches. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .XX + .03 + 0 O 30' .XXX + .010 DRAW ING NOT TO SCALE. REV. DESCRIPTION OF CHANGES BY 06/12/13 ORIGINAL RELEASE PP TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-10015 REVISION: 08/06/13 ENGR: PETER PHAM REF: LNK420EG QA: KEVIN CLARK SHEET: 1 OF 1