TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC PARAMETER MIN. PRIMARY INDUCTANCE 100 KHZ @ 0.40V. 1-3 FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. MAX. 643.1 677 710.9 1 UNITS PRIMARY 2 uH 12 2 LEAKAGE INDUCTANCE 1-3 100 KHZ @ 0.40 V, short 8-12. -------- -------- 25 H PRIMARY RESONANT FREQ. 1-3 400 -------- ------- KHz TURN 1-3 1-3 1-2 ---------------------- 11.1 : 1 7.7 : 1 10 : 1 ---------------------- + 4% + 4% + 4% 3000 -------- -------- PRIMARY 1 3 5 RATIO'S: : 5-6 : 8-12 : 8-11 SECONDARY 2 8,9 SECONDARY 1 BIAS 10,11 6 HIPOT: 60 Hz for 1 sec. PRIMARY AND BIAS TO SEC. Vrms FIGURE 2: PHYSICAL DIMENSIONS mm. 26.5 Max. P 31.5 Max. POL-JX015 M 18.0 Max. YYWW WHITE DOT PIN#1 I.D. 0.64 Sq. 4.65 34.5 1 2 3 4 5 6 NOTES: 12 11 10 9 8 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements if UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. 7 REV. DESCRIPTION OF CHANGES BY 05/31/13 Original Release. KC RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN mm. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + 0.3 + 5O .XX + 0.20 DRAW ING NOT TO SCALE. TRANSFOMER CONTROL DRAWING PREMIER P/N: POL-JX015 REVISION: 05/31/13 ENG: Peter Pham REF: TOP266EG QA: Kevin Clark SHEET: 1 OF 1