TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC PARAMETER MIN. PRIMARY INDUCTANCE (1-2) FREQ. = 100 KHZ @ 0.40Vrms 1.51 FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. M AX. 1.67 1.83 1 UNITS PRIMARY mHY 2 TURN RATIO'S: 2-1 : 5-3 2-1 : 9-6 -------- 1 : .165 -------- 1 : .061 --------------- + 3% + 3% PRI LEAKAGE IND. (2-1) FREQ. = 100 KHZ @ 0.250Vrms TIE 6-7 -------- 100 HY RESONANT FREQUENCY (1-2) 300 -------- 3 BIAS 5 -------- -------- 9 ([email protected]) SECONDARY 6 2 SHIELD HIPOT: PRIMARY TO SECONDARIES 3000 -------- -------- Vrms NC FIGURE 2: PHYSICAL DIMENSIONS mm (INCHES) WHITE DOT DENOES PIN#1 10 9 1 2 8 7 3 4 6 5 17.0 (.670) MAX CORE TAPED 19.0 (.748) MAX 15.0 MAX PNK-62001 Y YWW P M 4.0 typ 1 2 3 3.2 4 9 8 7 0.80 5 15.5 10 NOTE1: A) ALL MATERIALS MEET "UL", "CSA" & "IEC" REQUIREMENTS B) ALL MATERIAL RATED 130C OR BETTER. C) VARNISH FINISHED ASSEMBLY. 6 20.0 MAX REV. DESCRIPTION OF CHANGES BY 12/09/09 OGIRINAL RELEASE PP RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN MM DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + .25 +0 O 30' .XX + .15 DO NOT SCALE DRAW ING TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-62001 REVISION: 12/09/09 ENGR: PETER PHAM REF: LINK CV SCALE: NONE SHEET: 1 OF 1