TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC PARAMETER MIN. PRIMARY INDUCTANCE (3-5) FREQ. = 100 KHZ @ 0.40Vrms 1.80 FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. M AX. 1.94 2.10 5 UNITS C-SHIELD mHY NC TURN RATIO'S: 3-5 : 9-8 -------- 1 .065 -------- + 3% PRI LEAKAGE IND. (3-5) FREQ. = 100 KHZ @ 0.250Vrms TIE 9-8 -------- -------- 120 HY RESONANT FREQUENCY (3-5) 700 NC SHIELD 5 -------- -------- 9 (5V@600mA) SECONDARY 8 5 PRIMARY HIPOT: PRIMARY TO SECONDARIES 3000 -------- -------- Vrms 3 FIGURE 2: PHYSICAL DIMENSIONS mm (INCHES) WHITE DOT DENOES PIN#1 10 9 1 2 8 7 3 4 6 5 17.0 (.670) MAX CORE TAPED P M 19.0 (.748) MAX 15.0 MAX PNK-36004 Y YWW 4.0 typ 1 2 3 3.2 4 9 8 7 0.80 5 15.5 10 NOTE1: A) ALL MATERIALS MEET "UL", "CSA" & "IEC" REQUIREMENTS B) ALL MATERIAL RATED 130C OR BETTER. C) VARNISH FINISHED ASSEMBLY. 6 20.0 MAX REV. DESCRIPTION OF CHANGES BY 12/09/09 OGIRINAL RELEASE PP RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN MM DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + .25 +0 O 30' .XX + .15 DO NOT SCALE DRAW ING TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-36004 REVISION: 12/09/09 ENGR: PETER PHAM REF: LINK-XT SCALE: NONE SHEET: 1 OF 1