WDG TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC PARAMETER MIN. INDUCTANCE (1-4). VOLTAGE = 0.40 Vrms. FREQUENCY = 100.0 KHz. 835 SPEC LIMITS TYP. M AX. 880 925 FIGURE 1: SCHEMATIC DIAGRAM UNITS 1 H WDG 4 FIGURE 2: PHYSICAL DIMENSIONS IN mm (inches) 8 7 6 5 3 4 PIN #1 DOT 0.5 1 (0.02) 2 11.0 (0.43) Max. PM PNK-10027 YYWW 4 1 2.00 (0.079) 8.5 (0.33) Max. CORE TAPE 5.0 (0.20) Max. 4 11.5 (0.45) 5 0.3 (0.01) NOTES: 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements of UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. REV. 08/13/13 DESCRIPTION OF CHANGES Original release. RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN mm. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + 0.25 + 5O .XX + 0.15 DRAW ING NOT TO SCALE. INDUCTOR CONTROL DRAWING PREMIER P/N: PNK-10027 REVISION: 08/13/13 ENGR: PETER PHAM REF: LNK457DG QA: Kevin Clark SHEET: 1 OF 1 KC