TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC PARAMETER MIN. INDUCTANCE (4-1) VOLTAGE = 0.100Vrms FREQUENCY = 42 KHz 2400 SPEC LIMITS TYP. MAX. 2550 2700 FIGURE 1: SCHEMATIC DIAGRAM 1 UNITS PRIMARY 85-265 VAC HY 5 4 LEAKAGE INDUCTANCE (4-1) VOLTAGE = 0.100Vrms, TIE 5-6 FREQUENCY = 100 KHZ SECONDARY 18V @0.175A 4 6 ------- ------- 50 HY SHIELD 3 TURN RATIO'S: (4-1) : (5-6) -------- 3.53 : 1 -------- + 2% FLUX BAND PRIMARY RESONANT FREQUENCY HIPOT: PRI TO SEC 300 3750 INPUT OUPUT VOLTAGE OUTPUT POWER ------- ------- -------- 85 KHz -------- Vrms 265 VAC VDC WATT 18 3.2 * Design to comply with the requirements of UL/CSA/IEC 60950-1. * Design to comply with the requirements of UL, IEC & CSA Insulation System Class B. * All units comply with the requirements of EU RoHS Directive. * All materials per Premier Magnetics UL file #E177139.AllCOC FIGURE 2: PHYSICAL DIMENSIONS (INCHES) mm PIN#1 I.D. WHITE DOT 8 7 6 5 1 2 3 4 0.61 (15.5) MAX PM PNK-50101 YYWW CORE TAPED .10 (2.54) MIN .018 (0.45) .15 (3.81) .492 (12.5) MAX .398 (10.16) 0.669 (17.0) MAX UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN MM DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + .25 +0 O 30' .XX + .15 DO NOT SCALE DRAW ING REV. DESCRIPTION OF CHANGES BY 04/30/13 ORIGINAL RELEASE PP TRANSFORMER CONTROL DRAWING PREMIER P/N:PNK-50101 REVISION: 04/30/13 ENGR: PETER PHAM REF: LNK501 QA: KEVIN CLARK SHEET: 1 OF 2