Preliminary ESD50V12L Low Capacitance TVS Diode Array Features • Transient protection for high speed data lines to • IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) • IEC 61000-4-4 (EFT) 40A (5/50ns) • IEC 61000-4-5 (Lightning) 0.5kV, 12A (8/20μs) • Array of surge rated diodes with internal TVS Diode • Protects two I/O lines • Operating Voltage: 12 volts • Low capacitance (5pF typical) for high-speed SOT-143 interfaces Low clamping voltage Solid-state silicon-avalanche technology • RoHS compliant package Mechanical Data • JEDEC SOT-143 package • UL 497B listed Molding compound flammability rating: UL 94V-0 • Packaging : Tape and Reel per EIA 481 RoHS/WEEE Compliant Application • ADSL • Industrial electronics • RS-422 interfaces • Portable electronics • Microcomputer input protection • LAN/WAN equipment • ADSL Packing & Order Information Shipping：3,000/Reel Schematic & PIN Configuration Publication Order Number: [ESD50V12L] © Bruckewell Technology Corporation Rev. A -2014 Preliminary ESD50V12L Low Capacitance TVS Diode Array MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Symbol Parameter Value Unit Ppk Peak Pulse Power (tp = 8/20μs) 500 W IPP Peak Pulse Current (tp = 8/20μs) 16 A VFP Peak Forward Voltage (IF = 1A, tp=8/20μs) 1.5 v Value Unit Maximum Ratings (Tc=25°C unless otherwise noted) Symbol Parameter TJ Lead Soldering Temperature 260 (10sec) °C TL Operating Temperature -55 to +125 °C TSTG Storage Temperature -55 to +150 °C Electrical Characteristics (Tc=25°C unless otherwise noted) Parameter Conditions Symbol Value Typical Max Unit Reverse VRWM Stand-Off Voltage Reverse It = 1Ma V 12 VBP V Breakdown Voltage VRWM =12V, T=25°C 13.5 IR 1 μA IPP = 5A, tp = 8/20μs VC 24 V Clamping Voltage IPP = 16A, tp = 8/20μs VC 50 31 V Junction Between I/O pins and Ground VR=0V,f=1MHz 5 10 pF Reverse Leakage Current Clamping Voltage Capacitance Between I/O pins VR =0V,f=1MHz Publication Order Number: [ESD50V12L] Cj 3 pF © Bruckewell Technology Corporation Rev. A -2014 Preliminary ESD50V12L Low Capacitance TVS Diode Array Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [ESD50V12L] © Bruckewell Technology Corporation Rev. A -2014