TM HWT 220 Series Output Inductors • Energy Storage Capacity: 37-59 mJ Specifications MIX 8 G0 SCHOTT P/N 33045 33046 33047 33048 33049 33050 33051 33052 33053 33054 33055 33056 33057 33058 33059 33060 33061 33062 33063 33064 33065 33066 33067 33068 33069 MIX 40 G2 L, µH 0 ADC 2.87 4.13 5.63 7.35 9.3 11.5 13.9 16.5 19.4 22.5 25.8 29.4 37.2 45.9 55.6 66.1 77.6 90.0 103 118 149 184 222 265 310 SCHOTT P/N 33070 33071 33072 33073 33074 33075 33076 33077 33078 33079 33080 33081 33082 33083 33084 33085 33086 33087 33088 33089 33090 33091 33092 33093 33094 L, µH 0 ADC 1.98 2.84 3.87 5.06 6.4 7.9 9.6 11.4 13.4 15.5 17.8 20.2 25.6 31.6 38.2 45.5 53.4 61.9 71.1 80.9 102 126 153 182 214 MIX 40 G1 SCHOTT P/N 33095 33096 33097 33098 33099 33100 33101 33102 33103 33104 33105 33106 33107 33108 33109 33110 33111 33112 33113 33114 33115 33116 33117 33118 33119 L, µH 0 ADC 2.73 3.92 5.34 6.98 8.83 10.9 13.2 15.7 18.4 21.4 24.5 27.9 35.3 43.6 52.8 62.8 73.7 85.5 98.1 112 141 174 211 251 295 MIX 40 G0 SCHOTT P/N 33120 33121 33122 33123 33124 33125 33126 33127 33128 33129 33130 33131 33132 33133 33134 33135 33136 33137 33138 33139 33140 33141 33142 33143 33144 L, µH 0 ADC 4.78 6.88 9.36 12.2 15.5 19.1 23.1 27.5 32.3 37.5 43.0 48.9 61.9 76.4 92.5 110 129 150 172 196 248 306 370 440 517 RATED CURRENT AMPS DC DCR mOHM REF # COILS 221 184 156 139 123 110 100 91.2 83.5 77.3 74.7 70.3 62.5 55.7 50.5 46.0 42.1 39.0 36.1 33.7 29.4 26.3 23.5 21.3 19.4 0.18 0.24 0.33 0.41 0.51 0.63 0.76 0.9 1.1 1.2 1.3 1.5 1.9 2.3 2.8 3.3 4.0 4.6 5.4 6.2 8.0 10.0 12.5 15.1 18.3 3 3 3 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Parts availability subject to Schott manufacturing schedules and leadtimes. Not all parts available from stock. Please contact us for more details and availability. The Adobe Acrobat Reader is required to view these linked documents. Electrical Specifications Test Criteria 1. Inductance tolerances at zero DC current are ±10% for G2 designs, ± 12% for G0 and G1 designs. 2. Inductances shown are at zero DC current. See inductance vs. bias curves for inductances with DC current. 3. Temperature rise is approximately 60°C at rated DC current. 4. Multiple coil units are rated with all coils parallel connected. 5. Parts are 100% tested for inductance and hipot (1000 Vrms). All data is believed to be accurate at time of printing. Schott Corporation reserves the right to make changes without notification. “Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder. © 2001 Schott Corporation 1000 Parkers Lake Road, Wayzata, Minnesota 55391 U.S.A. Tel: + (952) 475-1173 Fax: + (952) 475-1786 Email: [email protected] Web: http://www.schottcorp.com Standard Configuration 220 SERIES INDUCTANCE vs DC CURRENT TYPICAL 100 80 Percent of Zero DC Inductance 1 60 2 3 40 1 - MIX 40 GAP-G2 2 - MIX 8 GAP-G0 3 - MIX 40 GAP-G1 4 - MIX 40 GAP-G0 4 20 0 0 20 40 60 80 100 120 140 160 180 200 Percent of Rated Current 1.70 MAX 3.00 MIN .40 REF 2.28 MAX 1.35 REF 2.26 MAX 1.49 REF All statements and technical information contained herein are believed to be accurate, but the accuracy and completeness thereof is not guaranteed. If any product is found to be defective, Schott Corporation’s (Seller) only obligation shall be to replace such quantity of the product proved to be defective. User shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection herewith. Seller shall not be liable for any direct, consequential, or incidental loss or damage. Conditions not specifically stated herein shall be governed by established trade customs. Schott Corporation reserves the right to makes changes without notification. “Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder. ©2001 Schott Corporation Schott Corporation 1000 Parkers Lake Road Wayzata, Minnesota 55391 U.S.A. Tel: + (952) 475-1173 Fax: + (952) 475-1786 Email: [email protected] Web: http://www.schottcorp.com