Globespan G.SHDSL Transformers • • • • • • • • Central Office or Remote Locations Excellent THD performance Supports PAM datarates from 72Kbps-2368Kbps Meets G.991.2 Standard Designed to optimize performance with Globespan Semiconductor Transceiver ICs UL94V-0 materials ISO 9001 Certified Supplier UL/CSA/BABT Safety Approvals Specifications Schott P/N OCL Line MH OCL Tol +/- % Turns Ratio Chip:Line +/- 1% Leakage uH Max DCR Chip Ohms Max DCR Line Ohms Max Dielectric Strength VAC Mi n Package / Schematic 38136 2.07 4.0 1:4 15 0.50 2.80 1500 EP13 THD/1 37521 2.07 4.0 1:4 15 0.50 2.80 1500 EP13 SMD/1 38137 3.0 6.0 1:5.4 15 0.33 3.00 1500 EP13 THD/1 39583 3.0 6.0 5.4:1 15 0.35 4.00 2050 EP13 SMD/2 39647 3.2 6.0 5.4:1 16 0.52 4.00 1500 STEP 10/3 Parts availability subject to Schott manufacturing schedules and leadtimes. Not all parts available from stock. Please contact us for more details and availability. The Adobe Acrobat Reader is required to view these linked documents. Electrical Specifications Test Criteria 1. These transformers are designed for operating within a temperature range of –40°C to +85°C. All electrical characteristics are reported for operating at 25°C. 2. Inductance is measured at 10kHz, 0.1 Vrms, Leakage Inductance at 100kHz, 0.1 Vrms. 3. Designed to meet UL/CSA/BABT 1950/EN60950 Isolation and Insulation requirements. 4. For complete parameters of components listed above, request individual specification sheets. All data is believed to be accurate at time of printing. Schott Corporation reserves the right to make changes without notification. “Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder. © 2001 Schott Corporation 1000 Parkers Lake Road, Wayzata, Minnesota 55391 U.S.A. Tel: + (952) 475-1173 Fax: + (952) 475-1786 Email: [email protected] Web: http://www.schottcorp.com STEP10 EP 10 SM D .580 ±.015 .460 MAX (11.94) REF: PWB PATTERN (14.74± 0.38) REF: PWB LAYOUT .077 (1.96) .080 (2.03) 4 5 YYWW (12.70) 5 SCHOTT YYWW-X 4 .500 MAX .500 MAX (12.70) (2.50) SCHOTT .098 8 1 .048 8 1 .035 (0.89) .098 (2.50) .615±.010 (15.62) (1.22) .615 (15.62) .006 TO .012 (0.2) .012 (0.3) .435 MAX (11.05) .460 MAX .098 (2.50) .492 ±.006 (12.50) (11.68) .024 (0.61) .605 MAX (15.37) .098 Coplanarity < .004 (0.10) (2.50) EP 13 THD EP 13 SM D .560 MAX (14.22) 5 REF PWB LAYOUT .670 ±.010 (17.02) .063 (1.60) 6 5 YYWW 1 6 .560 MAX (14.22) 10 SCHOTT SCHOTT YYWW-X .560 MAX (14.22) 1 .035 (0.89) .098 (2.5) 10 .710 18.03) .500 MAX (12.70) .110 MIN (2.79) .100 ±.010 (2.54±0.25) .400 ±.010 (10.16±0.25) .008 (0.2) .500 MAX (12.70) .606 ± .006 (15.39) .020 Sq. (0.51) .098 ±.010 (2.5) .028 (0.7) Coplanarity < .004 (0.10) SCHEMATICS 1 1 2 9 1 3 8 1 9 8 4 2 5 7 3 2 6 7 3 2 4 5 4 7 All statements and technical information contained herein are believed to be accurate, but the accuracy and completeness thereof is not guaranteed. If any product is found to be defective, Schott Corporation’s (Seller) only obligation shall be to replace such quantity of the product proved to be defective. User shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection herewith. Seller shall not be liable for any direct, consequential, or incidental loss or damage. Conditions not specifically stated herein shall be governed by established trade customs. Schott Corporation reserves the right to makes changes without notification. “Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder. ©2001 Schott Corporation Schott Corporation 1000 Parkers Lake Road Wayzata, Minnesota 55391 U.S.A. Tel: + (952) 475-1173 Fax: + (952) 475-1786 Email: [email protected] Web: http://www.schottcorp.com