CPW3-1700S010–Silicon Carbide Schottky Diode Chip Z-Rec™ Rectifier VRRM = 1700 V IF(AVG)= 10 A Features • • • • • • • Qc = 70 nC Chip Outline 1700-Volt Schottky Rectifier Zero Reverse Recovery Zero Forward Recovery High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF Part Number Anode Cathode Package Marking CPW3-1700S010B Al Ni/Ag Sawn on Foil Wafer # on Foil Maximum Ratings Symbol Parameter Value Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 1700 V VRSM Surge Peak Reverse Voltage 1700 V VDC DC Blocking Voltage 1700 V 10 A TJ=175˚C IF(AVG) Average Forward Current Note IFRM Repetitive Peak Forward Surge Current 40.5 22.5 A TC=25˚C, tP=10 ms, Half Sine Wave, D=1 TC=110˚C, tP=10 ms, Half Sine Wave, D=1 1 IFSM Non-Repetitive Peak Forward Surge Current 54 36.5 A TC=25˚C, tP=10 ms, Half Sine Wave, D=1 TC=110˚C, tP=10 ms, Half Sine Wave, D=1 1 TJ , Tstg Operating Junction and Storage Temperature -55 to +175 ˚C Rev. W3-1700S010 Datasheet: CP Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.7 3 2 3.5 V IR Reverse Current 10 50 50 200 μA VR = 1700 V TJ=25°C VR = 1700 V TJ=175°C QC Total Capacitive Charge 70 110 nC VR = 1700 V, IF = 10 A di/dt = 400 A/μs TJ = 25°C C Total Capacitance pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 200 V, TJ = 25˚C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz 880 80 60 Note IF = 10A TJ=25°C IF = 10 A TJ=175°C Note: 1. Assumes θJ-C Thermal Resistance of 1.06˚C/W or less. Subject to change without notice. www.cree.com/power 1 Typical Performance 20 20 0.000025 25 TJ = TJ = TJ = TJ = IF Forward Current (A) 16 16 14 14 25°C 75°C 125°C 175°C 0.00002 20 IR Reverse Current (μA) 18 18 12 12 10 10 88 66 44 0.000015 15 0.00001 10 T = 25°C J TJ = 25°C = 75°C TJ = T 75°C J TJ = T 125°C = 125°C J TJ = 175°C 0.000005 5 TJ = 175°C 22 00 0 0 1 1 2 2 3 4 3 4 VF Forward Voltage (V) 5 5 0 0 0 0 6 6 Figure 1. Forward Characteristics 200 200 400 600 800 1000 1200 1400 1600 1800 400 600 800 1000 1200 1400 1600 1800 VR Reverse Voltage (V) Figure 2. Reverse Characteristics 1000 1000 900 900 (pF) C Capacitance C Capacitance (pF) 800 800 700 700 600 600 500 500 400 400 300 300 200 200 100 100 00 1 1 10 10 100 100 VR Reverse Voltage (V) VR Reverse Voltage (V) Figure 3. Capacitance vs. Reverse Voltage 2 CPW3-1700S010 Rev. - 1000 1000 Mechanical Parameters Parameter Typ. Unit 3.78 X 2.68 mm Anode Pad Size 3.2 X 2.1 mm Anode Pad Opening 2.5 X 1.4 mm 387 ± 10% μm 4 μm 1.8 μm Die Size Thickness Anode Metalization (Al) Cathode Metalization (Ni/Ag) Chip Dimensions A 3.78 D 1.40 Symbol 2.68 B 2.50 C Dimension mm inch A 3.78 0.149 B 2.68 0.106 C 2.50 0.098 D 1.40 0.055 Part Number Anode Cathode Package Marking CPW3-1700S010B Al Ni/Ag Sawn on Foil Wafer # on Foil The die-on-tape method of delivering these SiC die may be considered a means of temporary storage only. Due to an increase in adhesion over time die stored for an extended period may affix too strongly to the tape. These die should be stored in a temperature-controlled nitrogen dry box soon after receipt. Cree will further recommend that all die be removed from tape to a waffle pack, to a similar storage medium, or used in production within 2 – 3 weeks of delivery to assure 100% release of all die without issues. This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks and Z-Rec is a trademark of Cree, Inc. 3 CPW3-1700S010 Rev. - Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power