Cree XLamp XT Family Binning and Labeling

Cree XLamp XT Family LEDs
®
®
Table of Contents
Introduction
Introduction.......................................................... 1
This document describes the product nomenclature
Bin and Order-Code Format.................................... 2
required to select and order Cree’s XLamp® XT Family
Performance Groups – Brightness............................ 3
Performance Groups – Radiant Flux.......................... 3
Performance Groups – Dominant Wavelength............ 4
Performance Groups – Forward Voltage.................... 4
Performance Groups – Chromaticity......................... 5
Cree’s Standard White Chromaticity Regions Plotted
on the CIE 1931 Curve........................................... 9
Cree’s Standard Cool White Kits Plotted on ANSI
Standard Chromaticity Regions...............................11
Cree’s Outdoor White Kits Plotted on ANSI Standard
CLD-AP86 rev 8B
binning & Labeling
LEDs. XLamp XT Family LEDs are tested and sorted
into bins which are then combined into orderable kits
identified by an order code.
All XLamp LEDs are tested and sorted by color and
brightness into a unique bin. Each bin contains LEDs
from only one color and brightness group and is uniquely
identified by a bin code. White XLamp LEDs are sorted
by chromaticity (color) and luminous flux (brightness).
Chromaticity Regions............................................12
Color XLamp LEDs are sorted by dominant wavelength
Cree’s Standard Warm and Neutral White Kits
(color) and luminous or radiant flux (brightness). LEDs
Plotted on ANSI Standard Chromaticity Regions........13
are shipped on reels containing LEDs from one bin and
Cree’s 2450 K & 2200 K CCT White Kits Plotted on
are always labeled with the appropriate bin code.
ANSI Standard Chromaticity Regions.......................14
Cree’s Standard Chromaticity Kits...........................15
Standard Order Codes and Bins
XT-E ANSI Cool White.......................................17
XT-E Neutral White...........................................18
XT-E Warm White.............................................20
12‑Volt XT-E HVW Warm White...........................21
Kits contain LEDs from a number of similar bins and
are fully defined by their order codes. A full explanation
of the order codes for XLamp XT Family LEDs, as well
as a list of standard order codes, is provided in this
document.
24‑Volt XT-E HVW Neutral White.........................22
24‑Volt XT-E HVW Warm White...........................22
www.cree.com/Xlamp
48‑Volt XT-E HVW ANSI Cool White.....................23
48‑Volt XT-E HVW Neutral White.........................24
48‑Volt XT-E HVW Warm White...........................25
XT-E Royal Blue................................................27
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®,
the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is
not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
xlamp ® xT led binning & labeling
Bin and Order-Code Format
Bin codes and order codes for XT-E White LEDs are configured in the following manner:
Order Code
Bin Code
Series
XTE = XT-E
Series
XTE = XT-E
Configuration
B: Internal code
D: Reel size
Internal code
Color specification
0: No Minimum CRI
B: 70 Minimum CRI
L: Standard CRI
H: 80 CRI Minimum
P: 85 CRI Minimum
U: 90 CRI Minimum
Luminous flux group
SSSCCC-B-WWW-FFF-VR-AAAA
Color specification
0: No Minimum CRI
B: 70 Minimum CRI
L: Standard CRI
H: 80 CRI Minimum
P: 85 CRI Minimum
U: 90 CRI Minimum
Internal code
Chromaticity kit
Vf bin
0: Default
SSSCCC-BD-HHHH-NNNNVRFGG
Flux
Chromaticity bin
Vf bin
0: Default
Internal code
Color
AWT = White
Color
AWT = White
Bin codes and order codes for XT-E High Voltage White LEDs are configured as follows:
Bin Code
Order Code
Series
XTE = XT-E
Series
XTE = XT-E
Configuration
B: Voltage class
D: Reel size
Configuration
B: Voltage class
Luminous flux group
Color Specification
L: Standard CRI
H: 80 CRI Minimum
Chromaticity
SSSCCC-BD-HHHH-NNNNNVFGG
Flux
Internal code
Color
HVW = High Voltage White
Color specification
L: Standard CRI
H: 80 CRI Minimum
SSSCCC-B-WWW-FFF-VR-AAAA
Internal code
Vf bin
0: Default
Chromaticity group
Color
HVW = High Voltage White
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
2
xlamp ® xT led binning & labeling
Bin codes and order codes for XT-E Royal Blue LEDs are configured as follows:
Order CodeBin Code
Series
XTEA = XT-E
Series
XTEA = XT-E
Configuration
Dominant wavelength group
Internal code
Kit number
SSSSCC-B-DDD-FFF-NN-NNNN
SSSSCC-BD-HHHH-NNNNNNNNN
Radiant flux group
Internal code
Configuration
Color
RY = Royal Blue
Color
RY = Royal Blue
Performance Groups – Brightness (TJ = 85 °C)
XLamp XT-E White and XT-E High Voltage White LEDs are tested for luminous flux and placed into one of the following
luminous-flux groups.
Group Code
Min. Luminous Flux
Max. Luminous Flux
N3
56.8
62
N4
62
67.2
P2
67.2
73.9
P3
73.9
80.6
P4
80.6
87.4
Q2
87.4
93.9
Q3
93.9
100
Q4
100
107
Q5
107
114
R2
114
122
R3
122
130
R4
130
139
R5
139
148
S2
148
156
Performance Groups – Radiant Flux (TJ = 85 °C)
XLamp XT-E Royal Blue LEDs are tested for radiant flux and placed into one the following bins.
Group Code
Minimum Radiant Flux
(mW)
Maximum Radiant Flux
(mW)
31 (K)
475
500
32 (L)
500
525
33 (M)
525
550
34 (N)
550
575
35 (P)
575
600
36 (Q)
600
625
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
3
xlamp ® xT led binning & labeling
Performance Groups – Dominant Wavelength (TJ = 85 °C)
XLamp XT-E Royal Blue LEDs are tested for dominant wavelength and placed into one of the regions defined by the
following bounding coordinates.
Group Code
Minimum Dominant
Wavelength (nm)
Maximum Dominant
Wavelength (nm)
D36
450.0
452.5
D37
452.5
455.0
D46
455.0
457.5
D47
457.5
460.0
D56
460.0
462.5
D57
462.5
465.0
Performance Groups – Forward Voltage (TJ = 85 °C)
48‑V XLamp XT-E High Voltage White LEDs are tested for forward voltage at 22 mA and placed into one the following
voltage bins.
Group Code
Minimum Forward
Voltage (V)
0
Maximum Forward
Voltage (V)
No Vf Bin
1
40.0
42.5
2
42.5
45.0
3
45.0
47.5
4
47.5
50.0
5
50.0
52.5
6
52.5
55.0
XLamp XT-E White and Royal Blue LEDs are tested for forward voltage and placed into one the following voltage bins.
Group Code
Minimum Forward
Voltage (V)
Maximum Forward
Voltage (V)
F
2.75
3.00
G
3.00
3.25
H
3.25
3.50
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
4
xlamp ® xT led binning & labeling
Performance Groups – Chromaticity
Region
0A
0R
1A
1R
2A
2R
3A
3R
4A
4R
x
y
0.2950
0.2970
0.2920
0.3060
0.2984
0.3133
0.3009
Region
x
y
0.2920
0.3060
0.2895
0.3135
0.2962
0.3220
0.3042
0.2984
0.2980
0.2880
0.2950
0.2970
0.3009
0.3042
0.3037
0.3048
Region
x
y
0.2984
0.3133
Region
x
y
0.2984
0.3133
0.2962
0.3220
0.3028
0.3304
0.3133
0.3048
0.3207
0.2895
0.3135
0.2962
0.3220
0.3037
0.2937
0.2870
0.3210
0.2937
0.3312
0.3009
0.3042
0.2937
0.3312
0.3005
0.3415
0.3068
0.3113
0.2937
0.2962
0.3220
0.3028
0.3304
0.3093
0.2993
0.3207
0.3028
0.3304
0.3115
0.3391
0.3130
0.3290
0.3130
0.3290
0.3144
0.3186
0B
0S
1B
0.3115
0.3391
0.3130
0.3290
0C
0T
1C
0.3205
0.3481
0.3213
0.3373
0D
0U
1D
0.3048
0.3207
0.3068
0.3113
0.3009
0.3042
0.3213
0.3373
0.3221
0.3261
0.3068
0.3113
0.3048
0.3207
0.3130
0.3290
0.3144
0.3186
0.3068
0.3113
0.3005
0.3415
0.3099
0.3509
0.3144
0.3186
0.3144
0.3186
0.3161
0.3059
0.3093
0.2993
0.3215
0.3350
0.3207
0.3462
0.3290
0.3538
0.3290
0.3417
0.3290
0.3417
0.3290
0.3538
0.3376
0.3616
0.3371
0.3490
0.3290
0.3300
0.3290
0.3417
0.3371
0.3490
0.3366
0.3369
0.3222
0.3243
0.3215
0.3350
0.3290
0.3417
0.3290
0.3300
0.3222
0.3243
0.3196
0.3602
0.3290
0.3690
0.3290
0.3300
0.3290
0.3300
0.3290
0.3180
1S
2B
2S
0.3099
0.3509
0.3115
0.3391
0.3028
0.3304
0.3290
0.3690
0.3290
0.3538
1T
2C
2T
0.3196
0.3602
0.3205
0.3481
0.3115
0.3391
0.3381
0.3762
0.3376
0.3616
1U
2D
2U
0.3221
0.3261
0.3231
0.3120
0.3161
0.3059
0.3366
0.3369
0.3361
0.3245
0.3231
0.3120
0.3207
0.3462
0.3290
0.3538
0.3290
0.3180
0.3371
0.3490
0.3376
0.3616
0.3463
0.3687
0.3451
0.3554
0.3451
0.3554
0.3463
0.3687
0.3551
0.3760
0.3533
0.3620
3B
3C
3D
0.3440
0.3427
0.3451
0.3554
0.3533
0.3620
0.3366
0.3369
0.3371
0.3490
0.3451
0.3554
0.3366
0.3369
0.3381
0.3762
0.3480
0.3840
0.3440
0.3428
0.3440
0.3428
0.3480
0.3840
0.3571
0.3907
0.3515
0.3487
0.3429
0.3307
0.3463
0.3687
0.3551
0.3760
0.3495
0.3339
3S
3T
3U
0.3515
0.3487
0.3440
0.3427
0.3361
0.3245
0.3376
0.3616
0.3463
0.3687
0.3429
0.3307
0.3530
0.3597
0.3548
0.3736
0.3641
0.3804
0.3615
0.3659
0.3615
0.3659
0.3590
0.3521
0.3641
0.3804
0.3615
0.3659
0.3512
0.3465
0.3530
0.3512
0.3465
0.3590
0.3521
0.3567
0.3389
0.3495
0.3339
4B
4S
0.3736
0.3874
0.3702
0.3722
0.3597
0.3615
0.3659
0.3571
0.3907
0.3668
0.3957
0.3590
0.3521
0.3668
0.3957
0.3771
0.4034
0.3670
0.3578
0.3641
0.3804
0.3736
0.3874
0.3548
0.3736
0.3641
0.3804
4C
4T
4D
4U
0.3702
0.3722
0.3670
0.3578
0.3590
0.3521
0.3640
0.3440
0.3567
0.3389
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
5
xlamp ® xT led binning & labeling
Performance Groups – Chromaticity (continued)
Region
5A
5A1
5B1
5C1
5D1
5R
6A
6A1
6B1
6C1
x
y
Region
0.3702
0.3722
0.3736
0.3874
0.3870
0.3958
0.3825
0.3798
0.3825
0.3798
0.3870
0.3958
0.4006
0.4044
0.3951
0.3876
0.3783
0.3646
0.3825
0.3798
0.3951
0.3876
0.3898
0.3716
5B
x
y
Region
5C
x
y
Region
5D
x
y
0.3670
0.3578
0.3702
0.3722
0.3825
0.3798
0.3783
0.3646
0.3670
0.3578
0.3686
0.3649
0.3744
0.3685
0.3726
0.3612
0.3686
0.3649
0.3744
0.3685
0.3726
0.3612
5A2
0.3702
0.3722
0.3763
0.3760
0.3744
0.3685
5A3
0.3763
0.3760
0.3825
0.3798
0.3804
0.3721
5A4
0.3744
0.3685
0.3804
0.3721
0.3783
0.3646
0.3702
0.3722
0.3719
0.3797
0.3782
0.3837
0.3763
0.3760
0.3719
0.3797
0.3736
0.3874
0.3802
0.3916
0.3782
0.3837
0.3782
0.3837
0.3802
0.3916
0.3869
0.3958
0.3847
0.3877
0.3763
0.3760
0.3782
0.3837
0.3847
0.3877
0.3825
0.3798
0.3825
0.3798
0.3847
0.3877
0.3912
0.3917
0.3887
0.3836
0.3847
0.3877
0.3912
0.3917
5B2
5C2
0.3869
0.3958
0.3937
0.4001
5B3
5C3
0.3937
0.4001
0.4006
0.4044
5B4
5C4
0.3912
0.3917
0.3978
0.3958
0.3887
0.3836
0.3912
0.3917
0.3978
0.3958
0.3950
0.3875
0.3783
0.3646
0.3804
0.3721
0.3863
0.3758
0.3840
0.3681
0.3804
0.3721
0.3825
0.3798
0.3887
0.3836
0.3863
0.3758
5D2
5D3
5D4
0.3863
0.3758
0.3887
0.3836
0.3950
0.3875
0.3840
0.3681
0.3863
0.3758
0.3924
0.3794
0.3670
0.3578
0.3771
0.4034
0.3916
0.4127
0.3783
0.3646
0.3783
0.3646
0.3916
0.4127
0.4064
0.4221
0.3898
0.3716
0.3743
0.3502
0.3869
0.3958
0.4006
0.4044
0.3848
0.3565
0.3640
0.3440
0.3736
0.3874
0.3869
0.3958
0.3743
0.3502
0.3941
0.3848
0.3996
0.4015
0.4146
0.4089
0.4080
0.3916
0.4080
0.3916
0.4017
0.3752
5S
6B
0.4146
0.4089
0.4080
0.3916
5T
6C
0.4299
0.4165
0.4221
0.3985
5U
6D
0.3924
0.3794
0.3898
0.3716
0.4221
0.3985
0.4147
0.3814
0.3889
0.369
0.3941
0.3848
0.4080
0.3916
0.4017
0.3752
0.3889
0.3690
0.3915
0.3768
0.3981
0.3800
0.4080
0.3916
0.3915
0.3768
0.3941
0.3848
0.4010
0.3882
0.3981
0.3800
0.3981
0.3800
0.3953
0.3720
6A2
0.4010
0.3882
0.3981
0.3800
6A3
0.4080
0.3916
0.4048
0.3832
6A4
0.4048
0.3832
0.4017
0.3751
0.3941
0.3848
0.3968
0.3930
0.4040
0.3966
0.4010
0.3882
0.3968
0.3930
0.3996
0.4015
0.4071
0.4052
0.4040
0.3966
0.4040
0.3966
0.4071
0.4052
0.4146
0.4089
0.4113
0.4001
6B2
6B3
6B4
0.4010
0.3882
0.4040
0.3966
0.4113
0.4001
0.4080
0.3916
0.4080
0.3916
0.4113
0.4001
0.4186
0.4037
0.4150
0.3950
0.4113
0.4001
0.4186
0.4037
0.4150
0.3950
6C2
0.4146
0.4089
0.4222
0.4127
0.4186
0.4037
6C3
0.4222
0.4127
0.4299
0.4165
0.4259
0.4073
6C4
0.4186
0.4037
0.4259
0.4073
0.4221
0.3984
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
6
xlamp ® xT led binning & labeling
Performance Groups – Chromaticity (continued)
Region
6D1
6R
7A
7A1
7B1
7C1
7D1
8A
8A1
8B1
x
y
Region
x
y
Region
x
y
Region
x
y
0.4017
0.3751
0.4048
0.3832
0.4116
0.3865
0.4082
0.3782
0.4048
0.3832
0.4080
0.3916
0.4150
0.3950
0.4116
0.3865
0.4116
0.3865
0.4150
0.3950
0.4221
0.3984
0.4183
0.3898
6D2
6D3
6D4
0.4082
0.3782
0.4116
0.3865
0.4183
0.3898
0.4147
0.3814
0.3889
0.3690
0.4054
0.4191
0.4217
0.4273
0.4017
0.3751
0.4017
0.3751
0.3957
0.3596
0.3840
0.3540
0.4221
0.3985
0.4299
0.4342
0.4028
0.4430
0.4260
0.3853
0.4342
0.4028
0.4147
0.3814
0.4221
0.4147
0.3814
0.4183
0.4183
0.3898
0.4242
0.3919
6S
7B
7A2
0.4217
0.4273
0.4146
0.4089
0.4382
0.4356
0.4299
0.4165
0.3996
0.4015
0.4146
0.4089
0.4165
0.4430
0.4212
0.4342
0.4028
0.4212
0.4562
0.426
0.4465
0.4071
0.4465
0.4071
0.4373
0.3893
0.3985
0.4342
0.4028
0.4260
0.3853
0.3898
0.4242
0.3919
0.4203
0.3833
0.4221
0.3984
0.4281
0.4006
6T
7C
7A3
0.4281
0.4006
0.4342
0.4028
6U
7D
7A4
0.4147
0.3814
0.4077
0.3652
0.3957
0.3596
0.4242
0.3919
0.4300
0.3939
0.4203
0.3833
0.4242
0.3919
0.4300
0.3939
0.4259
0.3853
0.4221
0.3984
0.4259
0.4073
0.4322
0.4096
0.4281
0.4006
0.4259
0.4073
0.4299
0.4165
0.4364
0.4188
0.4322
0.4096
7B2
7B3
0.4322
0.4096
0.4364
0.4188
0.4281
0.4006
0.4322
0.4096
0.4342
0.4028
0.4385
0.4119
0.4449
0.4141
0.4403
0.4049
0.4385
0.4119
0.4430
0.4212
0.4496
0.4236
0.4449
0.4141
0.4449
0.4141
0.4496
0.4236
0.4562
0.4260
0.4513
0.4164
0.4403
0.4049
0.4449
0.4141
0.4513
0.4164
0.4465
0.4071
0.4259
0.3853
0.4300
0.3939
0.4359
0.3960
0.4316
0.3873
0.4300
0.3939
0.4359
0.3960
7C2
7D2
0.4342
0.4028
0.4403
0.4049
7C3
7D3
0.4430
0.4212
0.4385
0.4119
7B4
0.4403
0.4049
0.4465
0.4071
7C4
7D4
0.4385
0.4119
0.4342
0.4028
0.4359
0.3960
0.4418
0.3981
0.4316
0.3873
0.4359
0.3960
0.4418
0.3981
0.4373
0.3893
0.4465
0.4071
0.4562
0.4260
0.4687
0.4289
0.4582
0.4099
0.4582
0.4099
0.4687
0.4289
0.4813
0.4319
0.4700
0.4126
0.4483
0.3918
0.4373
0.3893
8B
0.4582
0.4099
0.4465
0.4071
8C
0.4700
0.4126
0.4582
0.4099
8D
0.4593
0.3944
0.4483
0.3918
0.4373
0.3893
0.4418
0.3981
0.4475
0.3994
0.4428
0.3906
0.4418
0.3981
0.4465
0.4071
0.4523
0.4085
0.4475
0.3994
0.4475
0.3994
0.4523
0.4085
0.4582
0.4099
0.4532
0.4008
8A2
8A3
8A4
0.4428
0.3906
0.4475
0.3994
0.4532
0.4008
0.4483
0.3919
0.4465
0.4071
0.4513
0.4164
0.4573
0.4178
0.4523
0.4085
0.4513
0.4164
0.4573
0.4178
0.4523
0.4085
8B2
0.4562
0.4260
0.4624
0.4274
0.4573
0.4178
8B3
0.4624
0.4274
0.4687
0.4289
0.4634
0.4193
8B4
0.4573
0.4178
0.4634
0.4193
0.4582
0.4099
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
7
xlamp ® xT led binning & labeling
Performance Groups – Chromaticity (continued)
Region
8C1
8D1
9A1
9B1
9C1
9D1
AA1
AB1
AC1
AD1
x
y
0.4582
0.4634
0.4695
0.4250
Region
x
y
0.4158
0.4634
0.4193
0.4695
0.4207
0.4641
0.4112
0.4252
0.4687
0.4289
0.4750
0.4304
0.4695
0.4207
0.4750
0.4304
0.4813
0.4319
0.4756
0.4221
8C2
Region
8C3
x
y
Region
8C4
x
y
0.4641
0.4156
0.4695
0.4207
0.4756
0.4221
0.4700
0.4126
0.4483
0.3919
0.4532
0.4008
0.4589
0.4021
0.4538
0.3931
0.4532
0.4008
0.4589
0.4021
0.4538
0.3931
8D2
0.4582
0.4099
0.4641
0.4112
0.4589
0.4021
8D3
0.4641
0.4112
0.4700
0.4126
0.4646
0.4034
8D4
0.4589
0.4021
0.4646
0.4034
0.4593
0.3944
0.4647
0.4035
0.4700
0.4126
0.4762
0.4135
0.4706
0.4043
0.4706
0.4043
0.4761
0.4135
0.4823
0.4144
0.4765
0.4051
0.4650
0.3951
0.4706
0.4043
0.4765
0.4051
0.4708
0.3959
0.4593
0.3944
0.4647
0.4035
0.4706
0.4043
0.4650
0.3951
0.4757
0.4222
0.4813
0.4319
0.4762
0.4135
0.4819
0.4231
0.4819
0.4231
0.4762
0.4135
9A2
9B2
0.4877
0.4327
0.4819
0.4231
9A3
9B3
0.4942
0.4335
0.4882
0.4239
9A4
9B4
0.4882
0.4239
0.4823
0.4144
0.4700
0.4126
0.4757
0.4223
0.4819
0.4231
0.4725
0.4135
0.4882
0.4239
0.4942
0.4335
0.5006
0.4342
0.4945
0.4248
0.4945
0.4248
0.5006
0.4342
0.5070
0.4350
0.5008
0.4256
0.4885
0.4153
0.4823
0.4144
9C2
0.4945
0.4248
0.4882
0.4239
9C3
0.5008
0.4256
0.4945
0.4248
9C4
0.4946
0.4162
0.4885
0.4153
0.4765
0.4051
0.4823
0.4144
0.4885
0.4153
0.4765
0.4051
0.4825
0.4059
0.4885
0.4153
0.4946
0.4162
0.4825
0.4059
0.4765
0.3966
0.4825
0.4059
0.4884
0.4068
0.4765
0.3966
0.4708
0.3959
0.4765
0.4051
0.4825
0.4059
0.4706
0.3959
0.4822
0.3973
0.4884
0.4067
0.4942
0.4066
0.4879
0.3972
0.4884
0.4067
0.4942
0.4066
9D2
AA2
0.4946
0.4162
0.5006
0.4160
9D3
AA3
0.5006
0.4160
0.5066
0.4158
9D4
AA4
0.4942
0.4066
0.5001
0.4064
0.4879
0.3972
0.4942
0.4066
0.5001
0.4064
0.4936
0.3970
0.4946
0.4162
0.5008
0.4256
0.5069
0.4254
0.5006
0.4160
0.5008
0.4256
0.5070
0.4350
0.5133
0.4348
0.5069
0.4254
AB2
AB3
AB4
0.5069
0.4254
0.5133
0.4348
0.5196
0.4346
0.5006
0.4160
0.5069
0.4254
0.5131
0.4252
0.5066
0.4067
0.5131
0.4252
0.5192
0.4250
0.5126
0.4156
0.5131
0.4162
0.5196
0.4346
0.5258
0.4343
0.5192
0.4250
0.5192
0.4160
0.5258
0.4343
0.5321
0.4341
0.5253
0.4248
AC2
AC3
AC4
0.5131
0.4252
0.5066
0.4158
0.5126
0.4066
0.5192
0.4250
0.5253
0.4248
0.5186
0.4154
0.4936
0.3970
0.5001
0.4064
0.5059
0.4062
0.4993
0.3969
0.5001
0.4064
0.5059
0.4062
0.4993
0.3969
AD2
0.5066
0.4158
0.5126
0.4156
0.5059
0.4062
AD3
0.5126
0.4156
0.5186
0.4154
0.5118
0.4061
AD4
0.5059
0.4062
0.5118
0.4061
0.5050
0.3967
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
8
xlamp ® xT led binning & labeling
Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve
ANSI Cool White
0.40
5000K
0.39
0.38
5700K
3S
0.37
6500K
2T
0.36
0.35
2C
1T
8000K
CCy
3B
2S
0T
0.33
0C
0B
0.31
2D
1C
1D
2U
ANSI
C78.377A
2R
1A
1U
0D
0A
3R
2A
1B
0S
0.32
3A
2B
1S
0.34
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
ANSI Neutral White and ANSI Warm White - XT-E & 48-V XT-E HVW
0.46
0.45
2700K
3000K
0.44
0.43
3500K
0.42
4000K
0.41
4500K
6C3
6C2
CCy
6B2
5C3
5000K
0.39
5B3
5C4
5B4
0.38
5B1
4C
0.37
5A2
4B
4D
3B
7A1
7A4
7A3
7D1
7D2
7D4
7D3
8A1
8B1
7C4
8A2
8A3
8A4
8D1
8B2
8B3
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
6D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
3C
0.36
6A2
5D2
7A2
6D3
6D2
6A3
5D3
5A3
6C1
6B1
5C1
5B2
6C4
6B4
5C2
7C1
7B4
7B1
6B3
0.40
7C2
7B3
7B2
7C3
5A1
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
9
xlamp ® xT led binning & labeling
Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve Continued
ANSI Neutral White and ANSI Warm White - 12-V & 24-V XT-E HVW
0.45
0.44
2700K
3000K
0.43
0.42
3500K
7C
0.41
7B
4000K
6C
0.40
0.39
CCy
8C
8B
4500K
5000K
0.38
4C
0.37
4B
3C
3B
3D
0.35
7D
8A
8D
7A
5C
6D
5B
5700K
0.36
6B
6A
5D
5A
ANSI
C78.377A
4D
4A
3A
0.34
0.50
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.33
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
10
xlamp ® xT led binning & labeling
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions
0.40
0.40
5000K
0.39
0.38
3S
51
6500K
0.36
8000K
0C
0A
ANSI
C78.377A
2R
1A
1U
0D
0.31
1R
0C
0A
1R
0U
0.40
0.40
5000K
0.39
5000K
0.39
0.38
5700K
0.38
0.37
2T
6500K
3B
2S
1T
8000K
ANSI
C78.377A
1U
1R
2U
ANSI
C78.377A
2R
1U
0D
1R
0U
CCx
0.36
0.35
0.35
0.34
0.33
0.32
0.31
0.28
0.28
0.36
0.28
0.34
0R
0.29
0.30
0B
1D
1A
0A
0.29
0.29
2A
1B
0C
0.30
0R
0.28
0S
0.31
0U
0.30
0.33
0.32
2D
1C
0.33
0D
0A
2U
2R
1S
0T
0.32
0B
0.31
1D
1A
0.34
0.31
0C
3R
2A
2C
1T
2B
0.30
0S
0.32
2D
1C
1B
2S
8000K
0.29
0T
0.33
2T
E1
0.35
3A
2B
1S
0.36
2C
CCy
0.35
0.34
5700K
3S
50
6500K
0.36
0.36
CCx
CCx
0.37
0.35
0.34
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.30
0.28
0.29
0.28
0.28
0.29
0.29
ANSI
C78.377A
2R
0R
0R
CCy
2U
1U
0D
0.30
0.29
0.28
1D
1A
0B
3R
2A
1B
0S
0.32
0U
0.30
0T
0.33
0.33
0.31
2U
2D
1C
0.32
0B
3R
1D
3A
2B
1S
0.31
0S
0.32
8000K
0.34
2A
1B
2C
1T
3A
CCy
0T
0.33
3B
2S
0.35
2D
1C
3S
2T
0.36
3B
2B
1S
5700K
6500K
2C
1T
0.34
53
0.37
2T
2S
0.35
CCy
0.38
5700K
0.37
5000K
0.39
CCx
0.40
5000K
0.39
0.38
5700K
E2
0.37
6500K
2T
0.36
2S
0.35
2C
1T
CCy
8000K
2B
0.34
1S
0T
0.33
0S
0.32
0C
0B
0.31
2A
1D
2U
ANSI
C78.377A
2R
1A
1U
0D
0A
2D
1C
1B
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
11
xlamp ® xT led binning & labeling
Cree’s Outdoor White Kits Plotted on ANSI Standard Chromaticity Regions
0.44
0.44
0.43
0.43
3500K
6T
0.42
4000K
4500K
C1
5000K
0.39
5B3
5B4
3T
3C
0.36
4A
0.38
6U
3R
6R
5U
4U
3A
0.34
ANSI
C78.377A
4R
3U
3R
0.33
0.43
0.44
0.43
0.44
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.42
0.32
0.32
CCx
CCx
0.44
0.44
0.43
0.43
3500K
6T
0.42
4000K
0.40
0.38
5B4
3T
3C
0.36
4D
3B
4A
5A4
5D4
6A1
6D1
6A4
0.38
6U
0.36
3U
5A1
5A4
5D1
5D4
6A3
6A2
6A1
6A4
6D3
6D2
6D4
6D1
6U
6R
5U
5R
4U
3A
ANSI
C78.377A
4R
0.34
3R
0.33
4D
3D
0.35
ANSI
C78.377A
4R
5D2
5A3
5A2
4A
5D3
5B1
4C
4B
3B
5C1
6C4
6C1
6B4
6B1
5C4
5B4
3T
3S
0.37
6B2
5C3
5B3
5B2
6C2
6B3
5C2
4T
3C
6R
5U
4U
3A
0.34
5A1
5D1
6C3
5T
5S
4S
6D4
6S
4500K
5000K
0.39
5R
3D
0.35
5D2
5A3
5A2
4B
5D3
5B1
4C
3S
0.37
0.40
6D3
6D2
6A3
6A2
6C4
6C1
6B4
6B1
5C4
5C1
5B2
4S
6B2
5C3
5B3
D2
6C2
6B3
5C2
4T
0.41
6C3
5T
5S
5000K
0.39
6T
4000K
6S
4500K
C2
3500K
0.42
CCy
0.41
3U
3R
0.33
0.42
0.41
0.40
0.38
0.37
0.36
0.35
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.39
0.32
0.32
0.34
CCy
6U
5R
3D
0.35
ANSI
C78.377A
4R
3U
0.33
4A
6D4
6D1
6A4
6A1
5D4
5D1
5A4
5A1
4D
3B
5D2
5A3
5A2
3C
0.36
5D3
5B1
4C
4B
6D3
6D2
6A3
6A2
6C4
6C1
6B4
6B1
5C4
5C1
5B4
3T
3S
0.37
6R
5U
4U
3A
0.34
6D1
6A4
6A1
5B3
5B2
6C2
6B3
6B2
5C3
5C2
4T
4S
5R
3D
0.35
5D4
5D1
5A4
5A1
4D
3B
5D2
5A3
5A2
4B
6C3
5T
5S
5000K
0.39
6D4
6S
4500K
D1
0.40
6D3
6D2
6A3
6A2
5D3
5B1
4C
3S
6B4
6B1
5C4
5C1
5B2
6C4
6C1
0.34
CCy
0.38
0.37
6C2
6B3
6B2
5C3
5C2
4T
4S
0.41
6C3
5T
5S
6T
4000K
6S
CCy
0.41
0.40
3500K
0.42
CCx
CCx
0.44
0.43
3500K
6T
0.42
0.41
4000K
C3
4500K
5B3
CCy
0.38
5B4
3T
3C
0.36
4D
3B
4A
5A1
5A4
5D1
5D4
6A1
6A4
6D4
6D1
6U
6R
5U
5R
3D
0.35
4U
3A
0.34
5D2
5A3
5A2
4B
5D3
5B1
4C
3S
0.37
6A2
6D3
6D2
6A3
6C4
6C1
6B4
6B1
5C4
5C1
5B2
6B2
5C3
5C2
4T
4S
6C2
6B3
5S
5000K
6C3
5T
0.40
0.39
6S
ANSI
C78.377A
4R
3U
3R
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
12
xlamp ® xT led binning & labeling
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard
Chromaticity Regions
0.46
0.45
2700K
3000K
0.44
0.43
0.42
4000K
0.41
E5
0.40
CCy
E6
4500K
5000K
0.39
0.38
E4
E3
0.37
5B1
4C
5C4
6D2
7D4
7D1
7A4
7A1
6A3
6A2
5D2
5A2
4B
6B1
7D2
7A3
7A2
6D3
8A2
7D3
8D1
8C3
8C4
8D3
8D4
6D1
6A4
6A1
5D4
5D1
ANSI
C78.377A
5A1
4D
8C2
6D4
5A4
3B
8C1
8D2
8A3
8A4
8A1
8B3
8B4
8B1
7C4
7C1
7B4
7B1
6C1
6B4
5D3
5A3
6C2
6C4
6B2
5C1
5B4
3C
0.36
5C3
5C2
5B3
5B2
6C3
8B2
7C3
7C2
7B3
7B2
6B3
E8
E7
3500K
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
0.46
0.45
2700K
3000K
0.44
0.43
3500K
0.42
F6
4500K
6C2
F5
5000K
0.39
F4
0.38
0.37
7A2
6D3
6D2
7A1
6A3
5D3
6A2
5D2
5A2
6C1
6B4
5C4
5B4
5A3
6C4
6B2
6B1
5C1
5B1
4C
4B
7A4
7A3
7D1
7C1
7D3
7D2
7D4
8A1
8B2
8B1
7C4
8A2
8A4
8A3
8D1
8B3
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
6D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
4D
3B
5B3
5B2
3C
0.36
5C3
5C2
7B4
7B1
7C3
7C2
7B3
7B2
6C3
6B3
0.40
CCy
F7
4000K
0.41
F8
5A1
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
13
xlamp ® xT led binning & labeling
Cree’s 2450 K & 2200 K CCT White Kits Plotted on ANSI Standard Chromaticity
Regions
0.45
0.44
F9
2700K
3000K
0.43
8C2
0.42
3500K
CCy
9B4
8C4 9B1
8C1
0.41
8D2
4000K
0.40
8D1
9B3
8C3 9B2
9A3
8D3 9A2
8D4 9A1
F9
9A4
0.39
0.38
0.37
0.53
0.51
0.49
0.47
0.45
0.43
0.41
0.39
0.37
0.36
CCx
0.45
0.45
FA
0.44
2450K
0.44
2200K
3000K
0.43
9B2
0.42
9B4
9C2
9C1
9C4
0.43
3000K
0.42
7C3
9C3
0.41
9A2
9A3
9D2
9A4
9D1
9D4
7C2
9D3
0.40
7D3
8A1
0.40
9A1
8A3
8A2
8A4
8B3
8B2
8B1
7C4
0.41
CCy
CCy
9B1
9B3
EA
2450K
2700K
2700K
8D1
8B4
8D2
8C1
8C2
AB2
AB3
AB4
AC1
2200K
AC2
AC3
8C3
AB1
AC4
8C4
AA2
AA3
AD2
AD3
8D3
AA1
AA4
AD1
AD4
8D4
0.39
0.38
0.39
0.37
CCx
0.55
0.54
0.53
0.52
0.51
0.50
0.49
0.48
0.47
0.46
0.45
0.36
0.44
0.54
0.52
0.50
0.48
0.46
0.44
0.38
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
14
xlamp ® xT led binning & labeling
Cree’s Standard Chromaticity Kits
The following table provides the chromaticity bins associated with chromaticity kits for XT-E LEDs.
Color
Cool
White
Neutral
White
Warm
White
CCT
Kit
Chromaticity Bins
6200 K
51
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K
53
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K
50
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K
E1
1A, 1B, 1C, 1D
5700 K
E2
2A, 2B, 2C, 2D
5000 K
E3
3A, 3B, 3C, 3D
5000 K
C1
3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S
4750 K
F4
3C, 3D, 4A, 4B
4750 K
D1
3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U
4500 K
E4
4A, 4B, 4C, 4D
4500 K
D2
3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S
4500 K
C2
3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U
4300 K
C3
4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S
4250 K
F5
4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K
E5
5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
3750 K
F6
5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K
E6
3250 K
F7
6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K
E7
7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
2850 K
F8
7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K
E8
8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2200 K
EA
AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4
The following table provides the chromaticity bins associated with chromaticity kits for 12-V XT-E HVW LEDs.
Color
Warm
White
CCT
Kit
Chromaticity Bins
3000 K
E7
7A, 7B, 7C, 7D
2850 K
F8
7C, 7D, 8A, 8B
2700 K
E8
8A, 8B, 8C, 8D
The following table provides the chromaticity bins associated with chromaticity kits for 24-V XT-E HVW LEDs.
Color
CCT
Kit
Chromaticity Bins
Neutral
White
5000 K
E3
3A, 3B, 3C, 3D
4750 K
F4
3C, 3D, 4A, 4B
3000 K
E7
7A, 7B, 7C, 7D
Warm
White
2850 K
F8
7C, 7D, 8A, 8B
2700 K
E8
8A, 8B, 8C, 8D
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
15
xlamp ® xT led binning & labeling
The following table provides the chromaticity bins associated with chromaticity kits for 48-V XT-E HVW LEDs.
Color
Cool
White
Neutral
White
Warm
White
CCT
Kit
Chromaticity Bins
6200 K
51
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K
53
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K
50
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K
E1
1A, 1B, 1C, 1D
5700 K
E2
2A, 2B, 2C, 2D
5000 K
E3
3A, 3B, 3C, 3D
4750 K
F4
3C, 3D, 4A, 4B
4500 K
E4
4A, 4B, 4C, 4D
4500 K
C2
3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U
4250 K
F5
4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K
E5
5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
3750 K
F6
5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K
E6
6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3250 K
F7
6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K
E7
2850 K
F8
7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K
E8
8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K
F9
8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D, 9A1, 9A2, 9A3, 9A4, 9B1, 9B2, 9B3, 9B4
2450 K
FA
9A1, 9A2, 9A3, 9A4, 9B1, 9B2, 9B3, 9B4, 9C1, 9C2, 9C3, 9C4, 9D1, 9D2, 9D3, 9D4
2200 K
EA
AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
16
xlamp ® xT led binning & labeling
The following tables of order codes list flux minimums and chromaticity regions for the various categories of XLamp XT
LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor.
Standard Order Codes and Bins (XT-E ANSI Cool White, TJ = 85 °C)
XLamp XT-E LED Standard Kit Codes - White
Chromaticity
Minimum
Luminous Flux
(lm) @ 350 mA*
Kit
Code
CCT
Flux (lm)
Order Codes
No Minimum CRI
70 CRI Minimum
80 CRI Minimum
ANSI Cool White (5000 K – 8300 K)
51
53
50
E1
E2
6200 K
6000 K
6200 K
6500 K
5700 K
R5
139
XTEAWT-00-0000-000000H51
XTEAWT-00-0000-00000BH51
R4
130
XTEAWT-00-0000-000000G51
XTEAWT-00-0000-00000BG51
R3
122
XTEAWT-00-0000-000000F51
XTEAWT-00-0000-00000BF51
XTEAWT-00-0000-00000HF51
R2
114
XTEAWT-00-0000-000000E51
XTEAWT-00-0000-00000BE51
XTEAWT-00-0000-00000HE51
Q5
107
XTEAWT-00-0000-00000HG51
XTEAWT-00-0000-00000HD51
R5
139
XTEAWT-00-0000-000000H53
XTEAWT-00-0000-00000BH53
R4
130
XTEAWT-00-0000-000000G53
XTEAWT-00-0000-00000BG53
R3
122
XTEAWT-00-0000-000000F53
XTEAWT-00-0000-00000BF53
XTEAWT-00-0000-00000HF53
R2
114
XTEAWT-00-0000-000000E53
XTEAWT-00-0000-00000BE53
XTEAWT-00-0000-00000HE53
Q5
107
R5
139
XTEAWT-00-0000-000000H50
XTEAWT-00-0000-00000BH50
R4
130
XTEAWT-00-0000-000000G50
XTEAWT-00-0000-00000BG50
XTEAWT-00-0000-00000HG53
XTEAWT-00-0000-00000HD53
XTEAWT-00-0000-00000HG50
R3
122
XTEAWT-00-0000-000000F50
XTEAWT-00-0000-00000BF50
XTEAWT-00-0000-00000HF50
R2
114
XTEAWT-00-0000-000000E50
XTEAWT-00-0000-00000BE50
XTEAWT-00-0000-00000HE50
Q5
107
R5
139
XTEAWT-00-0000-000000HE1
XTEAWT-00-0000-00000BHE1
R4
130
XTEAWT-00-0000-000000GE1
XTEAWT-00-0000-00000BGE1
XTEAWT-00-0000-00000HGE1
R3
122
XTEAWT-00-0000-000000FE1
XTEAWT-00-0000-00000BFE1
XTEAWT-00-0000-00000HFE1
XTEAWT-00-0000-000000EE1
XTEAWT-00-0000-00000BEE1
XTEAWT-00-0000-00000HD50
R2
114
Q5
107
XTEAWT-00-0000-00000HEE1
R5
139
XTEAWT-00-0000-000000HE2
XTEAWT-00-0000-00000BHE2
R4
130
XTEAWT-00-0000-000000GE2
XTEAWT-00-0000-00000BGE2
R3
122
XTEAWT-00-0000-000000FE2
XTEAWT-00-0000-00000BFE2
XTEAWT-00-0000-00000HFE2
R2
114
XTEAWT-00-0000-000000EE2
XTEAWT-00-0000-00000BEE2
XTEAWT-00-0000-00000HEE2
Q5
107
XTEAWT-00-0000-00000HDE1
XTEAWT-00-0000-00000HGE2
XTEAWT-00-0000-00000HDE2
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
17
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (XT-E Neutral White, TJ = 85 °C)
XLamp XT-E LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous
Flux (lm)
@ 350 mA*
Order Codes XTEAWT-00- (+ extensions below)
Code
Flux
(lm)
No Minimum CRI
70 CRI Minimum
R5
139
0000-000000HE3
0000-00000BHE3
R4
130
0000-000000GE3
0000-00000BGE3
0000-00000LGE3
0000-00000HGE3
R3
122
0000-000000FE3
0000-00000BFE3
0000-00000LFE3
0000-00000HFE3
R2
114
0000-000000EE3
0000-00000BEE3
0000-00000LEE3
Q5
107
75 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E3
C1
F4
D1
E4
5000 K
5000 K
4750 K
4750 K
4500 K
0000-00000HEE3
0000-00000HDE3
Q4
100
0000-00000PCE3
0000-00000UCE3
Q3
93.9
0000-00000PBE3
0000-00000UBE3
Q2
87.4
0000-00000PAE3
0000-00000UAE3
R5
139
0000-000000HC1
0000-00000BHC1
R4
130
0000-000000GC1
0000-00000BGC1
R3
122
0000-000000FC1
0000-00000BFC1
0000-00000LFC1
R2
114
0000-000000EC1
0000-00000BEC1
0000-00000LEC1
R5
139
0000-000000HF4
0000-00000BHF4
R4
130
0000-000000GF4
0000-00000BGF4
R3
122
0000-000000FF4
0000-00000BFF4
0000-00000LFF4
0000-00000HFF4
R2
114
0000-000000EF4
0000-00000BEF4
0000-00000LEF4
0000-00000HEF4
0000-00000LDF4
0000-00000HDF4
0000-00000LGC1
0000-00000LGF4
Q5
107
Q4
100
0000-00000PCF4
0000-00000UCF4
Q3
93.9
0000-00000PBF4
0000-00000UBF4
Q2
87.4
0000-00000PAF4
0000-00000UAF4
R5
139
0000-000000HD1
0000-00000BHD1
R4
130
0000-000000GD1
0000-00000BGD1
R3
122
0000-000000FD1
0000-00000BFD1
0000-00000LFD1
R2
114
0000-000000ED1
0000-00000BED1
0000-00000LED1
R5
139
0000-000000HE4
0000-00000BHE4
R4
130
0000-000000GE4
0000-00000BGE4
0000-00000LGE4
R3
122
0000-000000FE4
0000-00000BFE4
0000-00000LFE4
R2
114
0000-000000EE4
0000-00000BEE4
Q5
107
0000-00000LGD1
0000-00000HFE4
0000-00000LEE4
0000-00000HEE4
0000-00000LDE4
0000-00000HDE4
Q4
100
0000-00000PCE4
0000-00000UCE4
Q3
93.9
0000-00000PBE4
0000-00000UBE4
Q2
87.4
0000-00000PAE4
0000-00000UAE4
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
18
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (XT-E Neutral White, TJ = 85 °C) - Continued
XLamp XT-E LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous
Flux (lm)
@ 350 mA*
Order Codes XTEAWT-00- (+ extensions below)
Code
Flux
(lm)
No Minimum CRI
70 CRI Minimum
R5
139
0000-000000HD2
0000-00000BHD2
R4
130
0000-000000GD2
0000-00000BGD2
R3
122
0000-000000FD2
0000-00000BFD2
0000-00000LFD2
R2
114
0000-000000ED2
0000-00000BED2
0000-00000LED2
Q5
107
R5
139
0000-000000HC2
0000-00000BHC2
R4
130
0000-000000GC2
0000-00000BGC2
R3
122
0000-000000FC2
0000-00000BFC2
0000-00000LFC2
R2
114
0000-000000EC2
0000-00000BEC2
0000-00000LEC2
R5
139
0000-000000HC3
0000-00000BHC3
R4
130
0000-000000GC3
0000-00000BGC3
0000-00000LGC3
R3
122
0000-000000FC3
0000-00000BFC3
0000-00000LFC3
R2
114
0000-000000EC3
0000-00000BEC3
0000-00000LEC3
R4
130
0000-000000GF5
0000-00000BGF5
75 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
D2
C2
C3
F5
E5
4500 K
4500 K
4300 K
4250 K
4000 K
0000-00000LDD2
0000-00000LGC2
R3
122
0000-000000FF5
0000-00000BFF5
0000-00000LFF5
0000-00000HFF5
R2
114
0000-000000EF5
0000-00000BEF5
0000-00000LEF5
0000-00000HEF5
Q5
107
0000-000000DF5
0000-00000BDF5
0000-00000LDF5
0000-00000HDF5
Q4
100
0000-00000LCF5
0000-00000HCF5
Q3
93.9
0000-00000PBF5
0000-00000UBF5
Q2
87.4
0000-00000PAF5
0000-00000UAF5
P4
80.6
0000-00000P9F5
0000-00000U9F5
R4
130
R3
122
0000-000000FE5
0000-00000BFE5
0000-00000LFE5
0000-00000HFE5
R2
114
0000-000000EE5
0000-00000BEE5
0000-00000LEE5
0000-00000HEE5
Q5
107
0000-000000DE5
0000-00000BDE5
0000-00000LDE5
0000-00000HDE5
0000-00000LCE5
0000-00000HCE5
0000-000000GE5
0000-00000BGE5
Q4
100
Q3
93.9
0000-00000PBE5
0000-00000UBE5
Q2
87.4
0000-00000PAE5
0000-00000UAE5
P4
80.6
0000-00000P9E5
0000-00000U9E5
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
19
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (XT-E Warm White, TJ = 85 °C)
XLamp XT-E LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous
Flux (lm)
@ 350 mA*
Order Codes XTEAWT-00- (+ extensions below)
Code
Flux
(lm)
No Minimum CRI
70 CRI Minimum
R3
122
0000-000000FF6
0000-00000BFF6
0000-00000LFF6
R2
114
0000-000000EF6
0000-00000BEF6
0000-00000LEF6
0000-00000HEF6
Q5
107
0000-000000DF6
0000-00000BDF6
0000-00000LDF6
0000-00000HDF6
0000-00000LCF6
0000-00000HCF6
80 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
ANSI Warm White (2200 K - 3750 K)
F6
E6
F7
E7
F8
3750 K
3500 K
3250 K
3000 K
2850 K
Q4
100
Q3
93.9
0000-00000PBF6
0000-00000UBF6
Q2
87.4
0000-00000PAF6
0000-00000UAF6
P4
80.6
0000-00000P9F6
0000-00000U9F6
R3
122
R2
114
0000-000000EE6
0000-00000BEE6
0000-00000LEE6
0000-00000HEE6
Q5
107
0000-000000DE6
0000-00000BDE6
0000-00000LDE6
0000-00000HDE6
0000-00000LCE6
0000-00000HCE6
0000-000000FE6
0000-00000BFE6
0000-00000LFE6
Q4
100
Q3
93.9
0000-00000PBE6
0000-00000UBE6
Q2
87.4
0000-00000PAE6
0000-00000UAE6
P4
80.6
0000-00000P9E6
0000-00000U9E6
R2
114
0000-000000EF7
0000-00000BEF7
0000-00000LEF7
0000-00000HEF7
Q5
107
0000-000000DF7
0000-00000BDF7
0000-00000LDF7
0000-00000HDF7
Q4
100
0000-000000CF7
0000-00000BCF7
0000-00000LCF7
0000-00000HCF7
0000-00000LBF7
0000-00000HBF7
0000-00000UAF7
Q3
93.9
Q2
87.4
0000-00000PAF7
P4
80.6
0000-00000P9F7
0000-00000U9F7
P3
73.9
0000-00000P8F7
0000-00000U8F7
R2
114
0000-000000EE7
0000-00000BEE7
0000-00000LEE7
0000-00000HEE7
Q5
107
0000-000000DE7
0000-00000BDE7
0000-00000LDE7
0000-00000HDE7
Q4
100
0000-000000CE7
0000-00000BCE7
0000-00000LCE7
0000-00000HCE7
0000-00000LBE7
0000-00000HBE7
Q3
93.9
Q2
87.4
0000-00000PAE7
0000-00000UAE7
P4
80.6
0000-00000P9E7
0000-00000U9E7
P3
73.9
0000-00000P8E7
0000-00000U8E7
Q5
107
0000-000000DF8
0000-00000BDF8
0000-00000LDF8
0000-00000HDF8
Q4
100
0000-000000CF8
0000-00000BCF8
0000-00000LCF8
0000-00000HCF8
Q3
93.9
0000-000000BF8
0000-00000BBF8
0000-00000LBF8
0000-00000HBF8
Q2
87.4
0000-00000LAF8
0000-00000HAF8
P4
80.6
0000-00000P9F8
0000-00000U9F8
P3
73.9
0000-00000P8F8
0000-00000U8F8
0000-00000PAF8
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
20
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (XT-E Warm White, TJ = 85 °C) - Continued
XLamp XT-E LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous
Flux (lm)
@ 350 mA*
Order Codes XTEAWT-00- (+ extensions below)
Code
Flux
(lm)
No Minimum CRI
70 CRI Minimum
Q5
107
0000-000000DE8
0000-00000BDE8
0000-00000LDE8
0000-00000HDE8
Q4
100
0000-000000CE8
0000-00000BCE8
0000-00000LCE8
0000-00000HCE8
Q3
93.9
0000-000000BE8
0000-00000BBE8
0000-00000LBE8
0000-00000HBE8
Q2
87.4
0000-00000LAE8
0000-00000HAE8
P4
80.6
80 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
ANSI Warm White (2200 K - 3750 K)
E8
EA
2700 K
2200 K
P3
73.9
Q3
93.9
0000-00000BBEA
Q2
87.4
0000-00000BAEA
P4
80.6
0000-00000B9EA
P3
73.9
0000-00000PAE8
0000-00000P9E8
0000-00000U9E8
0000-00000P8E8
0000-00000U8E8
0000-00000HAEA
0000-00000H9EA
0000-00000H8EA
Standard Order Codes and Bins (12‑Volt XT-E HVW Warm White, TJ = 85 °C)
XLamp XT-E HVW LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous Flux
(lm) @ 88 mA*
Order Codes
Code
Flux
(lm)
Q5
107
XTEHVW-D0-0000-00000LDE7
XTEHVW-D0-0000-00000HDE7
Q4
100
XTEHVW-D0-0000-00000LCE7
XTEHVW-D0-0000-00000HCE7
Q3
93.9
XTEHVW-D0-0000-00000LBE7
XTEHVW-D0-0000-00000HBE7
Q4
100
XTEHVW-D0-0000-00000LCF8
XTEHVW-D0-0000-00000HCF8
Q3
93.9
XTEHVW-D0-0000-00000LBF8
XTEHVW-D0-0000-00000HBF8
Q2
87.4
XTEHVW-D0-0000-00000LAF8
XTEHVW-D0-0000-00000HAF8
Q4
100
XTEHVW-D0-0000-00000LCE8
XTEHVW-D0-0000-00000HCE8
Q3
93.9
XTEHVW-D0-0000-00000LBE8
XTEHVW-D0-0000-00000HBE8
Q2
87.4
XTEHVW-D0-0000-00000LAE8
XTEHVW-D0-0000-00000HAE8
82 CRI Typical
80 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
E7
F8
E8
3000 K
2850 K
2700 K
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
21
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (24‑Volt XT-E HVW Neutral White, TJ = 85 °C)
XLamp XT-E LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous Flux
(lm) @ 44 mA*
Order Codes
Code
Flux
(lm)
R2
114
XTEHVW-H0-0000-00000LEE3
XTEHVW-H0-0000-00000HEE3
Q5
107
XTEHVW-H0-0000-00000LDE3
XTEHVW-H0-0000-00000HDE3
Q4
100
XTEHVW-H0-0000-00000LCE3
XTEHVW-H0-0000-00000HCE3
R2
114
XTEHVW-H0-0000-00000LEF4
XTEHVW-H0-0000-00000HEF4
Q5
107
XTEHVW-H0-0000-00000LDF4
XTEHVW-H0-0000-00000HDF4
Q4
100
XTEHVW-H0-0000-00000LCF4
XTEHVW-H0-0000-00000HCF4
75 CRI Typical
80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E3
F4
5000 K
4750 K
Standard Order Codes and Bins (24‑Volt XT-E HVW Warm White, TJ = 85 °C)
XLamp XT-E HVW LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous Flux
(lm) @ 44 mA*
Order Codes
Code
Flux
(lm)
Q4
100
XTEHVW-H0-0000-00000LCE7
XTEHVW-H0-0000-00000HCE7
Q3
93.9
XTEHVW-H0-0000-00000LBE7
XTEHVW-H0-0000-00000HBE7
Q2
87.4
XTEHVW-H0-0000-00000LAE7
XTEHVW-H0-0000-00000HAE7
Q3
93.9
XTEHVW-H0-0000-00000LBF8
XTEHVW-H0-0000-00000HBF8
Q2
87.4
XTEHVW-H0-0000-00000LAF8
XTEHVW-H0-0000-00000HAF8
P4
80.6
XTEHVW-H0-0000-00000L9F8
XTEHVW-H0-0000-00000H9F8
Q3
93.9
XTEHVW-H0-0000-00000LBE8
XTEHVW-H0-0000-00000HBE8
Q2
87.4
XTEHVW-H0-0000-00000LAE8
XTEHVW-H0-0000-00000HAE8
P4
80.6
XTEHVW-H0-0000-00000L9E8
XTEHVW-H0-0000-00000H9E8
82 CRI Typical
80 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
E7
F8
E8
3000 K
2850 K
2700 K
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
22
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (48‑Volt XT-E HVW ANSI Cool White, TJ = 85 °C)
XLamp XT-E HVW LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous Flux
(lm) @ 22 mA*
Code
Flux (lm)
Order Codes
No Minimum CRI
ANSI Cool White (5000 K – 8300 K)
51
53
50
E1
E2
6200 K
6000 K
6200 K
6500 K
5700 K
R5
139
XTEHVW-Q0-0000-00000LH51
R4
130
XTEHVW-Q0-0000-00000LG51
R3
122
XTEHVW-Q0-0000-00000LF51
R2
114
XTEHVW-Q0-0000-00000LE51
Q5
107
XTEHVW-Q0-0000-00000LD51
Q4
100
XTEHVW-Q0-0000-00000LC51
R5
139
XTEHVW-Q0-0000-00000LH53
R4
130
XTEHVW-Q0-0000-00000LG53
R3
122
XTEHVW-Q0-0000-00000LF53
R2
114
XTEHVW-Q0-0000-00000LE53
Q5
107
XTEHVW-Q0-0000-00000LD53
Q4
100
XTEHVW-Q0-0000-00000LC53
R5
139
XTEHVW-Q0-0000-00000LH50
R4
130
XTEHVW-Q0-0000-00000LG50
R3
122
XTEHVW-Q0-0000-00000LF50
R2
114
XTEHVW-Q0-0000-00000LE50
Q5
107
XTEHVW-Q0-0000-00000LD50
Q4
100
XTEHVW-Q0-0000-00000LC50
R5
139
XTEHVW-Q0-0000-00000LHE1
R4
130
XTEHVW-Q0-0000-00000LGE1
R3
122
XTEHVW-Q0-0000-00000LFE1
R2
114
XTEHVW-Q0-0000-00000LEE1
Q5
107
XTEHVW-Q0-0000-00000LDE1
Q4
100
XTEHVW-Q0-0000-00000LCE1
R5
139
XTEHVW-Q0-0000-00000LHE2
R4
130
XTEHVW-Q0-0000-00000LGE2
R3
122
XTEHVW-Q0-0000-00000LFE2
R2
114
XTEHVW-Q0-0000-00000LEE2
Q5
107
XTEHVW-Q0-0000-00000LDE2
Q4
100
XTEHVW-Q0-0000-00000LCE2
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
23
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (48‑Volt XT-E HVW Neutral White, TJ = 85 °C)
XLamp XT-E LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 22 mA*
Code
Flux (lm)
Order Codes
75 CRI Typical
80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E3
F4
E4
F5
E5
5000 K
4750 K
4500 K
4250 K
4000 K
R3
122
XTEHVW-Q0-0000-00000LFE3
R2
114
XTEHVW-Q0-0000-00000LEE3
Q5
107
XTEHVW-Q0-0000-00000LDE3
Q4
100
XTEHVW-Q0-0000-00000LCE3
Q3
93.9
XTEHVW-Q0-0000-00000LBE3
R4
130
XTEHVW-Q0-0000-00000LGF4
R3
122
XTEHVW-Q0-0000-00000LFF4
R2
114
XTEHVW-Q0-0000-00000LEF4
Q5
107
XTEHVW-Q0-0000-00000LDF4
Q4
100
XTEHVW-Q0-0000-00000LCF4
Q3
93.9
XTEHVW-Q0-0000-00000LBF4
R4
130
XTEHVW-Q0-0000-00000LGE4
R3
122
XTEHVW-Q0-0000-00000LFE4
R2
114
XTEHVW-Q0-0000-00000LEE4
Q5
107
XTEHVW-Q0-0000-00000LDE4
Q4
100
XTEHVW-Q0-0000-00000LCE4
Q3
93.9
XTEHVW-Q0-0000-00000LBE4
R2
114
XTEHVW-Q0-0000-00000LEF5
Q5
107
XTEHVW-Q0-0000-00000LDF5
XTEHVW-Q0-0000-00000HDF5
Q4
100
XTEHVW-Q0-0000-00000LCF5
XTEHVW-Q0-0000-00000HCF5
Q3
93.9
XTEHVW-Q0-0000-00000LBF5
XTEHVW-Q0-0000-00000HBF5
Q2
87.4
XTEHVW-Q0-0000-00000LAF5
XTEHVW-Q0-0000-00000HAF5
P4
80.6
XTEHVW-Q0-0000-00000L9F5
XTEHVW-Q0-0000-00000H9F5
R2
114
XTEHVW-Q0-0000-00000LEE5
Q5
107
XTEHVW-Q0-0000-00000LDE5
XTEHVW-Q0-0000-00000HDE5
Q4
100
XTEHVW-Q0-0000-00000LCE5
XTEHVW-Q0-0000-00000HCE5
Q3
93.9
XTEHVW-Q0-0000-00000LBE5
XTEHVW-Q0-0000-00000HBE5
Q2
87.4
XTEHVW-Q0-0000-00000LAE5
XTEHVW-Q0-0000-00000HAE5
P4
80.6
XTEHVW-Q0-0000-00000L9E5
XTEHVW-Q0-0000-00000H9E5
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
24
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (48‑Volt XT-E HVW Warm White, TJ = 85 °C)
XLamp XT-E HVW LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous Flux
(lm) @ 22 mA*
Order Codes
Code
Flux
(lm)
R2
114
XTEHVW-Q0-0000-00000LEF6
Q5
107
XTEHVW-Q0-0000-00000LDF6
XTEHVW-Q0-0000-00000HDF6
Q4
100
XTEHVW-Q0-0000-00000LCF6
XTEHVW-Q0-0000-00000HCF6
Q3
93.9
XTEHVW-Q0-0000-00000LBF6
XTEHVW-Q0-0000-00000HBF6
Q2
87.4
XTEHVW-Q0-0000-00000LAF6
XTEHVW-Q0-0000-00000HAF6
P4
80.6
XTEHVW-Q0-0000-00000L9F6
XTEHVW-Q0-0000-00000H9F6
P3
73.9
XTEHVW-Q0-0000-00000L8F6
XTEHVW-Q0-0000-00000H8F6
82 CRI Typical
80 CRI Minimum
ANSI Warm White (2200 K - 3750 K)
F6
E6
F7
E7
F8
E8
3750 K
3500 K
3250 K
3000 K
2850 K
2700 K
R2
114
XTEHVW-Q0-0000-00000LEE6
Q5
107
XTEHVW-Q0-0000-00000LDE6
XTEHVW-Q0-0000-00000HDE6
Q4
100
XTEHVW-Q0-0000-00000LCE6
XTEHVW-Q0-0000-00000HCE6
Q3
93.9
XTEHVW-Q0-0000-00000LBE6
XTEHVW-Q0-0000-00000HBE6
Q2
87.4
XTEHVW-Q0-0000-00000LAE6
XTEHVW-Q0-0000-00000HAE6
P4
80.6
XTEHVW-Q0-0000-00000L9E6
XTEHVW-Q0-0000-00000H9E6
P3
73.9
XTEHVW-Q0-0000-00000L8E6
XTEHVW-Q0-0000-00000H8E6
Q5
107
XTEHVW-Q0-0000-00000LDF7
XTEHVW-Q0-0000-00000HDF7
Q4
100
XTEHVW-Q0-0000-00000LCF7
XTEHVW-Q0-0000-00000HCF7
Q3
93.9
XTEHVW-Q0-0000-00000LBF7
XTEHVW-Q0-0000-00000HBF7
Q2
87.4
XTEHVW-Q0-0000-00000LAF7
XTEHVW-Q0-0000-00000HAF7
P4
80.6
XTEHVW-Q0-0000-00000L9F7
XTEHVW-Q0-0000-00000H9F7
P3
73.9
XTEHVW-Q0-0000-00000L8F7
XTEHVW-Q0-0000-00000H8F7
Q5
107
XTEHVW-Q0-0000-00000LDE7
XTEHVW-Q0-0000-00000HDE7
Q4
100
XTEHVW-Q0-0000-00000LCE7
XTEHVW-Q0-0000-00000HCE7
Q3
93.9
XTEHVW-Q0-0000-00000LBE7
XTEHVW-Q0-0000-00000HBE7
Q2
87.4
XTEHVW-Q0-0000-00000LAE7
XTEHVW-Q0-0000-00000HAE7
P4
80.6
XTEHVW-Q0-0000-00000L9E7
XTEHVW-Q0-0000-00000H9E7
P3
73.9
XTEHVW-Q0-0000-00000L8E7
XTEHVW-Q0-0000-00000H8E7
Q4
100
XTEHVW-Q0-0000-00000LCF8
XTEHVW-Q0-0000-00000HCF8
Q3
93.9
XTEHVW-Q0-0000-00000LBF8
XTEHVW-Q0-0000-00000HBF8
Q2
87.4
XTEHVW-Q0-0000-00000LAF8
XTEHVW-Q0-0000-00000HAF8
P4
80.6
XTEHVW-Q0-0000-00000L9F8
XTEHVW-Q0-0000-00000H9F8
P3
73.9
XTEHVW-Q0-0000-00000L8F8
XTEHVW-Q0-0000-00000H8F8
P2
67.2
XTEHVW-Q0-0000-00000L7F8
XTEHVW-Q0-0000-00000H7F8
Q4
100
XTEHVW-Q0-0000-00000LCE8
XTEHVW-Q0-0000-00000HCE8
Q3
93.9
XTEHVW-Q0-0000-00000LBE8
XTEHVW-Q0-0000-00000HBE8
Q2
87.4
XTEHVW-Q0-0000-00000LAE8
XTEHVW-Q0-0000-00000HAE8
P4
80.6
XTEHVW-Q0-0000-00000L9E8
XTEHVW-Q0-0000-00000H9E8
P3
73.9
XTEHVW-Q0-0000-00000L8E8
XTEHVW-Q0-0000-00000H8E8
P2
67.2
XTEHVW-Q0-0000-00000L7E8
XTEHVW-Q0-0000-00000H7E8
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
25
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (48‑Volt XT-E HVW Warm White, TJ = 85 °C) Continued
XLamp XT-E HVW LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum
Luminous Flux
(lm) @ 22 mA*
Code
Flux
(lm)
Order Codes
82 CRI Typical
80 CRI Minimum
ANSI Warm White (2200 K - 3750 K)
F9
FA
EA
2700 K
2450 K
2200 K
Q3
93.9
XTEHVW-Q0-0000-00000LBF9
Q2
87.4
XTEHVW-Q0-0000-00000LAF9
XTEHVW-Q0-0000-00000HAF9
P4
80.6
XTEHVW-Q0-0000-00000L9F9
XTEHVW-Q0-0000-00000H9F9
P3
73.9
XTEHVW-Q0-0000-00000H8F9
P3
73.9
XTEHVW-Q0-0000-00000H8FA
P2
67.2
XTEHVW-Q0-0000-00000H7FA
N4
62
XTEHVW-Q0-0000-00000H6FA
P2
67.2
XTEHVW-Q0-0000-00000H7EA
N4
62
XTEHVW-Q0-0000-00000H6EA
N3
56.8
XTEHVW-Q0-0000-00000H5EA
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
26
xlamp ® xT led binning & labeling
Standard Order Codes and Bins (XT-E Royal Blue, TJ = 85 °C)
The following tables provide order codes for XLamp XT-E Royal Blue LEDs.
XLamp XT-E Royal Blue LEDs
Dominant Wavelength Range
DWL
Kit
Codes
Min.
Max.
Order Codes, Minimum Radiant Flux @ 350 mA, Tj=85 °C*
Group
DWL
(nm)
Group
DWL
(nm)
475 mW - Radiant Flux
Group Code 31(K)
500 mW - Radiant Flux
Group Code 32(L)
525 mW - Radiant Flux
Group Code 33(M)
01
D36
450
D57
465
XTEARY-00-0000-000000K01
XTEARY-00-0000-000000L01
XTEARY-00-0000-000000M01
02
D36
450
D47
460
XTEARY-00-0000-000000K02
XTEARY-00-0000-000000L02
XTEARY-00-0000-000000M02
03
D46
455
D57
465
XTEARY-00-0000-000000K03
XTEARY-00-0000-000000L03
XTEARY-00-0000-000000M03
04
D36
450
D37
455
XTEARY-00-0000-000000K04
XTEARY-00-0000-000000L04
XTEARY-00-0000-000000M04
05
D46
455
D47
460
XTEARY-00-0000-000000K05
XTEARY-00-0000-000000L05
XTEARY-00-0000-000000M05
06
D56
460
D57
465
XTEARY-00-0000-000000K06
XTEARY-00-0000-000000L06
XTEARY-00-0000-000000M06
07
D37
452.5
D46
457.5
XTEARY-00-0000-000000K07
XTEARY-00-0000-000000L07
XTEARY-00-0000-000000M07
08
D47
457.5
D56
462.5
XTEARY-00-0000-000000K08
XTEARY-00-0000-000000L08
XTEARY-00-0000-000000M08
09
D37
452.5
D56
462.5
XTEARY-00-0000-000000K09
XTEARY-00-0000-000000L09
XTEARY-00-0000-000000M09
XLamp XT-E Royal Blue LEDs
Dominant Wavelength Range
DWL
Kit
Codes
Min.
Max.
Order Codes, Minimum Radiant Flux @ 350 mA, Tj=85 °C*
Group
DWL
(nm)
Group
DWL
(nm)
550 mW - Radiant Flux
Group Code 34(N)
575 mW - Radiant Flux
Group Code 35(P)
600 mW - Radiant Flux
Group Code 36(Q)
01
D36
450
D57
465
XTEARY-00-0000-000000N01
XTEARY-00-0000-000000P01
XTEARY-00-0000-000000Q01
02
D36
450
D47
460
XTEARY-00-0000-000000N02
XTEARY-00-0000-000000P02
XTEARY-00-0000-000000Q02
03
D46
455
D57
465
XTEARY-00-0000-000000N03
XTEARY-00-0000-000000P03
04
D36
450
D37
455
XTEARY-00-0000-000000N04
XTEARY-00-0000-000000P04
05
D46
455
D47
460
XTEARY-00-0000-000000N05
XTEARY-00-0000-000000P05
06
D56
460
D57
465
XTEARY-00-0000-000000N06
07
D37
452.5
D46
457.5
XTEARY-00-0000-000000N07
08
D47
457.5
D56
462.5
XTEARY-00-0000-000000N08
09
D37
452.5
D56
462.5
XTEARY-00-0000-000000N09
XTEARY-00-0000-000000Q04
XTEARY-00-0000-000000P07
XTEARY-00-0000-000000P09
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
•
Cree XLamp XT LED Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order
code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
27