Cree XLamp XH Family LEDs ® CLD-AP147 rev 0A binning & Labeling ® Table of Contents Introduction Introduction.......................................................... 1 This document describes the product nomenclature Bin and Order-Code Format.................................... 2 required to select and order Cree’s XLamp XH Family Performance Groups – Luminous Flux....................... 2 LEDs. XLamp XH Family LEDs are tested and sorted Performance Groups – Chromaticity......................... 3 into bins which are then combined into orderable kits Cree’s Standard White Chromaticity Regions Plotted identified by an order code. on the 1931 CIE Curve........................................... 6 Cree’s Standard Cool White Kits Plotted on ANSI All XLamp LEDs are tested and sorted by color and Standard Chromaticity Regions................................ 7 brightness into a unique bin. Each bin contains LEDs Cree’s Standard Warm and Neutral White Kits Plotted from only one color and brightness group and is uniquely on ANSI Standard Chromaticity Regions................... 8 identified by a bin code. White XLamp LEDs are sorted Cree’s Standard Chromaticity Kits............................ 9 by chromaticity (color) and luminous flux (brightness). Standard Order Codes and Bins LEDs are shipped on reels containing LEDs from one bin XH-B ANSI Cool White......................................10 and are always labeled with the appropriate bin code. XH-B Neutral White..........................................10 XH-B Warm White............................................11 Kits contain LEDs from a number of similar bins and XH-G ANSI Cool White......................................11 are fully defined by their order codes. A full explanation XH-G Neutral White..........................................12 of the order codes for XLamp XH Family LEDs, as well XH-G Warm White............................................12 as a list of standard order codes, is provided in this www.cree.com/XLamp document. Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp xlamp xH led binning & labeling Bin and Order-Code Format Bin codes and order codes for XH White are configured in the following manner: Order Code Bin Code Series XHB = XH-B XHG = XH-G Series XHB = XH-B XHG = XH-G Configuration B: Internal code D: Reel size 0: 1,000 pcs 2: 250 pcs Internal code Luminous flux group Color specification 0: No Minimum CRI B: 70 Minimum CRI L: Standard CRI H: 80 CRI Minimum P: 85 CRI Minimum U: 90 CRI Minimum Color specification 0: No Minimum CRI B: 70 Minimum CRI L: Standard CRI H: 80 CRI Minimum P: 85 CRI Minimum U: 90 CRI Minimum SSSCCC-B-WWW-FFF-VR-AAAA Internal code Chromaticity kit Vf bin 0: Default Flux Chromaticity bin Vf bin 0: Default Internal code Color AWT = White SSSCCC-BD-HHHH-NNNNVRFGG Color AWT = White Performance Groups – Luminous Flux (TJ = 25 °C) XLamp XH Family White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. These group codes, with a 0 appended, are used in the Bin Code “Luminous flux group.” Group Code Min. Luminous Flux (lm) Max. Luminous Flux (lm) H0 18.1 23.5 J2 23.5 26.8 J3 26.8 30.6 K2 30.6 35.2 K3 35.2 39.8 Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 2 xlamp xH led binning & labeling Performance Groups – Chromaticity XLamp XH Family White LEDs are tested for luminous flux and placed into one of the following chromaticity groups. These group codes are used in the Bin Code “Chromaticity bin.” Two-digit group codes are appended with a 0. Region 0A 0R 1A 1R 2A 2R 3A 3R 4A x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 Region x y 0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3042 0.2984 0.2980 0.2880 0.2950 0.2970 0.3009 0.3042 0.3037 0.3048 Region x y 0.2984 0.3133 Region x y 0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3133 0.3048 0.3207 0.2895 0.3135 0.2962 0.3220 0.3037 0.2937 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993 0.3207 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3130 0.3290 0.3144 0.3186 0B 0S 1B 0.3115 0.3391 0.3130 0.3290 0C 0T 1C 0.3205 0.3481 0.3213 0.3373 0D 0U 1D 0.3048 0.3207 0.3068 0.3113 0.3009 0.3042 0.3213 0.3373 0.3221 0.3261 0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3068 0.3113 0.3005 0.3415 0.3099 0.3509 0.3144 0.3186 0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261 1S 0.3391 0.3304 0.3161 0.3059 0.2993 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 2C 0.3205 0.3481 0.3115 0.3391 1U 0.3093 2B 0.3115 0.3028 1T 2D 0.3231 0.3120 0.3161 0.3059 0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3290 0.3300 0.3290 0.3180 0.3231 0.3120 0.3371 0.3490 0.3376 0.3616 0.3463 0.3687 0.3451 0.3554 0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620 0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427 0.3366 0.3369 0.3381 0.3762 0.3480 0.3840 0.3440 0.3428 0.3440 0.3428 0.3429 0.3307 2S 3B 3S 0.3290 0.3690 0.3290 0.3538 0.3207 0.3462 0.3480 0.3840 0.3463 0.3687 2T 3C 3T 0.3381 0.3762 0.3376 0.3616 0.3290 0.3538 2U 3D 0.3366 0.3369 0.3361 0.3245 0.3290 0.3180 0.3571 0.3907 0.3515 0.3487 0.3551 0.3760 0.3495 0.3339 3U 0.3361 0.3245 0.3376 0.3616 0.3463 0.3687 0.3429 0.3307 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659 0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3590 0.3521 0.3512 0.3465 4B 0.3615 0.3659 0.3530 0.3597 4C 0.3702 0.3722 0.3615 0.3659 4D 0.3670 0.3578 0.3590 0.3521 Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 3 xlamp xH led binning & labeling Performance Groups – Chromaticity (continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 7B1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 0.3612 Region 5A2 x y 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685 Region 5A3 x y 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721 Region 5A4 x y 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 0.3702 0.3722 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 5B2 5B3 5B4 0.3847 0.3877 0.3825 0.3798 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 5C2 5C3 5C4 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 5D2 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 5D3 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 5D4 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.4040 0.3966 6A2 6B2 0.3996 0.4015 0.4071 0.4052 6A3 6B3 0.4071 0.4052 0.4146 0.4089 6A4 6B4 0.4040 0.3966 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4150 0.3950 6C2 0.4222 0.4127 0.4186 0.4037 6C3 0.4299 0.4165 0.4259 0.4073 6C4 0.4259 0.4073 0.4221 0.3984 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 6D2 6D3 6D4 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 0.4203 0.3833 0.4183 0.3898 0.4242 0.3919 7A2 0.4221 0.3984 0.4281 0.4006 7A3 0.4281 0.4006 0.4342 0.4028 7A4 0.4242 0.3919 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4281 0.4006 7B2 0.4364 0.4188 0.4322 0.4096 7B3 0.4430 0.4212 0.4385 0.4119 7B4 0.4385 0.4119 0.4342 0.4028 Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 4 xlamp xH led binning & labeling Performance Groups – Chromaticity (continued) Region 7C1 7D1 8A1 8B1 8C1 8D1 x y Region x y Region x y Region x y 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4403 0.4049 0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071 0.4259 0.3853 0.4300 0.3939 0.4359 0.3960 0.4316 0.3873 0.4300 0.3939 0.4359 0.3960 7C2 7D2 0.4342 0.4028 0.4403 0.4049 7C3 7D3 0.4403 0.4049 0.4465 0.4071 7C4 7D4 0.4359 0.3960 0.4418 0.3981 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.4373 0.3893 0.4418 0.3981 0.4475 0.3994 0.4428 0.3906 0.4418 0.3981 0.4475 0.3994 0.4428 0.3906 8A2 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994 8A3 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008 8A4 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4465 0.4071 0.4513 0.4164 0.4573 0.4178 0.4523 0.4085 0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 0.4582 0.4099 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4634 0.4193 0.4695 0.4207 8B2 8C2 0.4687 0.4289 0.4750 0.4304 8B3 8C3 0.4750 0.4304 0.4813 0.4319 8B4 8C4 0.4695 0.4207 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4483 0.3919 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4538 0.3931 8D2 0.4641 0.4112 0.4589 0.4021 8D3 0.4700 0.4126 0.4646 0.4034 8D4 0.4646 0.4034 0.4593 0.3944 Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 5 xlamp xH led binning & labeling Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White 0.40 5000K 0.39 0.38 5700K 3S 0.37 6500K 2T 0.36 0.35 2C 1T 8000K CCy 3B 2S 1S 0.34 0T 0.33 0S 0.32 3R 2A 1D 0C 0.31 2D 1C 1B 0B 3A 2B 2U ANSI C78.377A 2R 1A 1U 0D 1R 0A 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx ANSI Neutral White and ANSI Warm White 0.46 0.45 2700K 3000K 0.44 0.43 3500K 0.42 4000K 0.41 4500K 6C2 CCy 6B2 5C3 5000K 0.39 5B3 5C4 5B4 0.38 5B1 4C 0.37 5A2 4B 4D 3B 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8B1 7C4 8A2 8A3 8A4 8D1 8B2 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.36 6A2 5D2 7A2 6D3 6D2 6A3 5D3 5A3 6C1 6B1 5C1 5B2 6C4 6B4 5C2 7C1 7B4 7B1 6B3 0.40 7C2 7B3 7B2 6C3 7C3 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 6 xlamp xH led binning & labeling Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000K 0.39 0.38 3S 51 6500K 0C 0A ANSI C78.377A 2R 1A 1U 0D 0S 0.32 0C 1R 0U 0.36 0.35 0.34 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.30 0.28 0.29 0.28 0.28 0.29 0.29 ANSI C78.377A 2R 1U 0R 0R CCx CCx 0.40 0.40 5000K 0.39 5000K 0.39 0.38 0.38 5700K 3S 50 0.37 6500K 1T 1U 1R 0C 0B 1R 0.36 0.35 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.28 0.29 0.28 0.28 0.29 0.30 ANSI C78.377A 2R 1U 0R 0R 0.29 2U 0U 0.30 0.29 0.28 1D 1A 0D 0A 0U 0.30 0S 0.32 0.31 3R 2A 1B 0.34 0A ANSI C78.377A 2R 1A 0D 0T 0.33 0.33 0.31 2U 3A 2D 1C 0.32 0C 0B 1D 2C 2B 1S 0.31 0S 3R 2A 1B 3B 2S 1T 8000K 0.34 CCy 0T 0.32 3A 2D 1C 2T E1 0.35 2B 0.33 0.36 3B 2C 8000K 1S 3S 6500K 2S 0.34 5700K 0.37 2T 0.36 0.35 CCy 2U 1A 0.30 0.29 0.28 1D 0D 0A 3R 2A 1B 0B 0.31 1R 0U 0.30 0T 0.33 0.33 0.31 2U 2D 1C 0.32 0B 1D 3A 2B 1S 0.31 0S 0.32 3R 2A 1B 8000K 0.34 CCy 0T 0.33 2C 1T 3A 2D 1C 3B 2S 0.35 2B 1S 3S 2T 0.36 3B 2C 8000K 5700K 6500K 2S 1T 0.34 53 0.37 2T 0.36 0.35 CCy 0.38 5700K 0.37 5000K 0.39 CCx CCx 0.40 5000K 0.39 0.38 5700K E2 0.37 3S 6500K 2T 0.36 2C 1T 8000K 0T 0.33 0S 0.32 3A 2B 1S 0.34 CCy 3B 2S 0.35 0C 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 3R 2A 1B 0B 0.31 2D 1C 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 7 xlamp xH led binning & labeling Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700K 3000K 0.44 0.43 0.42 4000K 0.41 E5 0.40 CCy E6 4500K 5000K 0.39 0.38 E4 E3 0.37 5C4 5B4 6B1 5D3 5A3 6D2 6A2 7D4 7D1 7A4 7A1 7D2 7A3 7A2 6D3 6A3 5D2 5A2 4B 6C1 6B4 3B 8C2 8C3 8C4 8D3 8D4 6D4 6D1 6A4 6A1 5D4 5D1 ANSI C78.377A 5A4 5A1 4D 8C1 8D2 8D1 8A4 8A1 8B3 8B4 8A3 8A2 7D3 8B2 8B1 7C4 7C1 7B4 7B1 6C4 6B2 5C1 5B1 4C 3C 0.36 5C3 5C2 5B3 5B2 6C2 7C3 7C2 7B3 7B2 6C3 6B3 E8 E7 3500K 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700K 3000K 0.44 0.43 3500K 0.42 F6 4500K 6C3 6C2 F5 5000K 0.39 F4 0.38 0.37 5C4 5B4 6C1 6B1 7A2 6D3 6D2 7A1 6A3 5D3 6A2 5D2 5A3 5A2 6B2 6B4 5C1 5B1 4C 4B 7A4 7A3 7D1 7C1 7D3 7D2 7D4 8A1 8B2 8B1 7C4 8A2 8A4 8A3 8D1 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 4D 3B 5B3 5B2 3C 0.36 5C3 5C2 7B4 7B1 6C4 7C3 7C2 7B3 7B2 6B3 0.40 CCy F7 4000K 0.41 F8 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 8 xlamp xH led binning & labeling Cree’s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color Cool White Neutral White Warm White CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 3A, 3B, 3C, 3D 5000 K E3 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 The following tables of order codes list flux minimums and chromaticity regions for the various categories of XLamp XH LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor. Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 9 xlamp xH led binning & labeling Standard Order Codes and Bins (XH-B ANSI Cool White, TJ = 25 °C) XLamp XH-B Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 65 mA Code Flux (lm) Order Codes No Minimum CRI 70 CRI Minimum 80 CRI Minimum ANSI Cool White (5000 K – 8300 K) E1 6500 K J3 26.8 XHBAWT-00-0000-00000LXE1 XHBAWT-00-0000-00000BXE1 50 6000 K J3 26.8 XHBAWT-00-0000-00000LX50 XHBAWT-00-0000-00000BX50 51 6000 K J3 26.8 XHBAWT-00-0000-00000LX51 XHBAWT-00-0000-00000BX51 53 5700 K J3 26.8 XHBAWT-00-0000-00000LX53 XHBAWT-00-0000-00000BX53 E2 5700 K J3 26.8 XHBAWT-00-0000-00000LXE2 XHBAWT-00-0000-00000BXE2 XHBAWT-00-0000-00000HXE1 XHBAWT-00-0000-00000HXE2 Standard Order Codes and Bins (XH-B Neutral White, TJ = 25 °C) XLamp XH-B Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 65 mA Code Flux (lm) Order Codes 70 CRI Minimum 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 5000 K F4 4750 K E4 4500 K F5 4300 K E5 4000 K J3 26.8 J2 23.5 J3 26.8 J2 23.5 J3 26.8 J2 23.5 XHBAWT-00-0000-00000BXE3 XHBAWT-00-0000-00000LXE3 XHBAWT-00-0000-00000HXE3 XHBAWT-00-0000-00000HWE3 XHBAWT-00-0000-00000BXF4 XHBAWT-00-0000-00000LXF4 XHBAWT-00-0000-00000HXF4 XHBAWT-00-0000-00000HWF4 XHBAWT-00-0000-00000BXE4 XHBAWT-00-0000-00000LXE4 XHBAWT-00-0000-00000HXE4 XHBAWT-00-0000-00000HWE4 J3 26.8 XHBAWT-00-0000-00000BXF5 J2 23.5 XHBAWT-00-0000-00000BWF5 XHBAWT-00-0000-00000LXF5 XHBAWT-00-0000-00000HXF5 J3 26.8 XHBAWT-00-0000-00000BXE5 XHBAWT-00-0000-00000LXE5 XHBAWT-00-0000-00000HXE5 J2 23.5 XHBAWT-00-0000-00000BWE5 XHBAWT-00-0000-00000LWE5 XHBAWT-00-0000-00000HWE5 XHBAWT-00-0000-00000HWF5 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Cree XLamp XH Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 10 xlamp xH led binning & labeling Standard Order Codes and Bins (XH-B Warm White, TJ = 25 °C) XLamp XH-B Standard Kit Codes - White Minimum Luminous Flux (lm) @ 65 mA Chromaticity Order Codes: XHBAWT-00-(+ extension below) Kit CCT Code Flux (lm) 70 CRI Minimum F6 3700 K J2 23.5 0000-00000BWF6 0000-00000LWF6 0000-00000HWF6 E6 3500 K J2 23.5 0000-00000BWE6 0000-00000LWE6 0000-00000HWE6 F7 3200 K J2 23.5 0000-00000BWF7 0000-00000LWF7 0000-00000HWF7 H0 18.1 E7 3000 K 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum 0000-00000PVF7 0000-00000UVF7 0000-00000PVE7 0000-00000UVE7 0000-00000PVF8 0000-00000UVF8 0000-00000PVE8 0000-00000UVE8 ANSI Warm White (2700 K - 3700 K) F8 E8 2850 K 2700 K J2 23.5 H0 18.1 J2 23.5 H0 18.1 J2 23.5 H0 18.1 0000-00000BWE7 0000-00000LWE7 0000-00000HWE7 0000-00000BWF8 0000-00000LWF8 0000-00000HWF8 0000-00000BWE8 0000-00000LWE8 0000-00000HWE8 Standard Order Codes and Bins (XH-G ANSI Cool White, TJ = 25 °C) XLamp XH-G Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 65 mA Code Flux (lm) Order Codes No Minimum CRI 70 CRI Minimum 80 CRI Minimum ANSI Cool White (5000 K – 8300 K) E1 6500 K J3 26.8 XHGAWT-00-0000-00000LXE1 XHGAWT-00-0000-00000BXE1 XHGAWT-00-0000-00000HXE1 50 6000 K J3 26.8 XHGAWT-00-0000-00000LX50 XHGAWT-00-0000-00000BX50 XHGAWT-00-0000-00000HX50 51 6000 K J3 26.8 XHGAWT-00-0000-00000LX51 XHGAWT-00-0000-00000BX51 XHGAWT-00-0000-00000HX51 53 5700 K J3 26.8 XHGAWT-00-0000-00000LX53 XHGAWT-00-0000-00000BX53 XHGAWT-00-0000-00000HX53 E2 5700 K J3 26.8 XHGAWT-00-0000-00000LXE2 XHGAWT-00-0000-00000BXE2 XHGAWT-00-0000-00000HXE2 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Cree XLamp XH Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 11 xlamp xH led binning & labeling Standard Order Codes and Bins (XH-G Neutral White, TJ = 25 °C) XLamp XH-G Standard Kit Codes - White Minimum Luminous Flux (lm) @ 65 mA Chromaticity Kit CCT Order Codes Code Flux (lm) 70 CRI Minimum K2 30.6 XHGAWT-00-0000-00000B0E3 XHGAWT-00-0000-00000L0E3 XHGAWT-00-0000-00000H0E3 J3 26.8 XHGAWT-00-0000-00000BXE3 XHGAWT-00-0000-00000LXE3 XHGAWT-00-0000-00000HXE3 K2 30.6 XHGAWT-00-0000-00000B0F4 XHGAWT-00-0000-00000LXF4 XHGAWT-00-0000-00000HXF4 XHGAWT-00-0000-00000LXE4 XHGAWT-00-0000-00000HXE4 XHGAWT-00-0000-00000LXF5 XHGAWT-00-0000-00000HXF5 XHGAWT-00-0000-00000LXE5 XHGAWT-00-0000-00000HXE5 75 Typical CRI 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 F4 E4 5000 K 4750 K 4500 K F5 4300 K E5 4000 K J3 26.8 XHGAWT-00-0000-00000BXF4 K2 30.6 XHGAWT-00-0000-00000B0E4 J3 26.8 XHGAWT-00-0000-00000BXE4 K2 30.6 XHGAWT-00-0000-00000B0F5 J3 26.8 XHGAWT-00-0000-00000BXF5 K2 30.6 XHGAWT-00-0000-00000B0E5 J3 26.8 XHGAWT-00-0000-00000BXE5 Standard Order Codes and Bins (XH-G Warm White, TJ = 25 °C) XLamp XH-G Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 65 mA Order Codes Order Codes: XHGAWT-00-(+ extension below) Code Flux (lm) 70 CRI Minimum K2 30.6 0000-00000B0F6 J3 26.8 0000-00000BXF6 J3 26.8 0000-00000BXE6 J3 26.8 0000-00000BXF7 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum 0000-00000PVF7 0000-00000UVF7 0000-00000PVE7 0000-00000UVE7 0000-00000PVF8 0000-00000UVF8 0000-00000PVE8 0000-00000UVE8 ANSI Warm White (2700 K - 3700 K) F6 3700 K E6 3500 K F7 E7 F8 E8 3200 K 3000 K 2850 K 2700 K J2 23.5 H0 18.1 J3 26.8 J2 23.5 H0 18.1 J3 26.8 J2 23.5 H0 18.1 J3 26.8 J2 23.5 H0 18.1 0000-00000LXF6 0000-00000HXF6 0000-00000HXE6 0000-00000LXF7 0000-00000HXF7 0000-00000HWF7 0000-00000BXE7 0000-00000LXE7 0000-00000HXE7 0000-00000HWE7 0000-00000BXF8 0000-00000BXE8 0000-00000LXF8 0000-00000HXF8 0000-00000LWF8 0000-00000HWF8 0000-00000LXE8 0000-00000HXE8 0000-00000LWE8 0000-00000HWE8 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Cree XLamp XH Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 12