CLD AP12 rev 10D Binning & Labeling Cree® XLamp® XR Family LEDs Table of Contents Introduction Introduction.....................................................................................1 This document describes the product nomenclature required to Bin and Order Code Formats..........................................................2 select and order Cree’s XLamp® XR-E and XR-C LEDs. XLamp Performance Groups – Brightness................................................3 XR-E and XR-C LEDs are tested and sorted into bins which are Performance Groups – Chromaticity.............................................4 then combined into orderable kits identified by an order code. Performance Groups – Dominant Wavelength.............................6 Performance Groups – Forward Voltage......................................6 All XLamp LEDs are tested and sorted by color and brightness Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE into a unique bin. Each bin contains LEDs from only one color Curve................................................................................................7 and brightness group and is uniquely identified by a bin code. Standard Order Codes and Bins White XLamp LEDs are sorted by chromaticity (color) and XR-C Cool White........................................................................8 luminous flux (brightness). Color XLamp LEDs are sorted by XR-C Neutral White....................................................................9 dominant wavelength (color) and luminous flux (brightness), XR-C Warm White....................................................................10 or in the case of royal blue, radiant flux (brightness). Amber, XR-C Color................................................................................11 red-orange and red LEDs are additionally binned into forward XR-E Cool White.......................................................................13 voltage bins. LEDs are shipped on reels containing LEDs from XR-E Neutral White..................................................................14 one bin and are always labeled with the appropriate bin code. XR-E Warm White....................................................................15 XR-E Color................................................................................16 Kits contain LEDs from a number of similar bins and are fully defined by their order codes. A full explanation of the order codes for each family, as well as a list of standard order codes, www.cree.com/Xlamp is provided in this document. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® XR Family LED Binning & Labeling Bin and Order Code Formats Bin codes and order codes are configured in the following manner: Order Code Bin Code Series XRE = XR-E XRC = XR-C Series XRE = XR-E XRC = XR-C Optical configuration (default = L1) Optical configuration (default = L1) Kit number Luminous or radiant flux group SSSCCC-BD-HHHH-NNNNN Internal code Color WHT = White ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RDO = Red-Orange RED = Red Internal code SSSCCC-BD-WW-FF-G-AA Voltage performance group (amber, red-orange, red) Chromaticity or dominant-wavelength group Color WHT = White ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RDO = Red-Orange RED = Red Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 2 XLamp ® XR Family LED Binning & Labeling Performance Groups – Brightness White XLamp XR-E and XR-C LEDs are tested for luminous flux and placed into one of the following luminous‑lux groups: Group Minimum Luminous Flux @ 350 mA (lm) Maximum Luminous Flux @ 350 mA (lm) M2 39.8 45.7 M3 45.7 51.7 N2 51.7 56.8 N3 56.8 62.0 N4 62.0 67.2 P2 67.2 73.9 P3 73.9 80.6 P4 80.6 87.4 Q2 87.4 93.9 Q3 93.9 100 Q4 100 107 Q5 107 114 R2 114 122 Blue and green XLamp XR-E and XR-C LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups: Group Minimum Luminous Flux @ 350 mA (lm) Maximum Luminous Flux @ 350 mA (lm) G 13.9 18.1 H 18.1 23.5 J 23.5 30.6 K 30.6 39.8 M 39.8 51.7 N 51.7 67.2 P 67.2 87.4 Q 87.4 114 Amber, red-orange and red XLamp XR-C LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups: Group Minimum Luminous Flux @ 350 mA (lm) Maximum Luminous Flux @ 350 mA (lm) J 23.5 30.6 K2 30.6 35.2 K3 35.2 39.8 M2 39.8 45.7 M3 45.7 51.7 N2 51.7 56.8 N3 56.8 62.0 N4 62.0 67.2 Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 3 XLamp ® XR Family LED Binning & Labeling Performance Groups – Brightness (continued) Royal-blue XLamp XR-E and XR-C LEDs are tested for radiant flux and placed into one of the following radiant‑flux groups: Group Minimum Radiant Flux (mW) @ 350 mA Maximum Radiant Flux (mW) @ 350 mA 12 250 300 13 300 350 14 350 425 15 425 500 16 500 600 Performance Groups – Chromaticity White XLamp LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates below. White Chromaticity Region Bounding Coordinates Region WK WA WM WB WE WN WC x y .283 .295 .298 .288 Region x y .284 .314 .355 .297 .316 .332 .306 .322 WF .287 .276 .301 .342 .292 .306 .317 .319 .295 .297 .329 .330 .283 .284 .329 .318 .279 .291 .318 .308 .295 .297 .329 .345 .308 .311 .329 .330 .310 .300 .317 .319 .298 .288 .316 .332 .306 .322 .329 .369 .308 .311 .329 .345 .295 .297 .316 .332 .292 .306 .314 .355 .301 .342 .329 .330 .306 .322 .329 .345 .292 .306 .346 .359 .287 .321 .344 .342 .308 .311 .348 .384 .317 .319 .346 .359 .318 .308 .329 .345 .310 .300 .329 .369 .316 .332 .317 .319 .308 .311 .306 .322 WP WD WG WJ WH Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 4 XLamp ® XR Family LED Binning & Labeling Performance Groups – Chromaticity (continued) Region 3A 4A 5A 6A 7A 8A x y .3371 .3451 .3440 .3428 .3366 .3369 .3512 .3465 .3529 .3597 .3615 .3659 .3590 Region x y .3490 .3376 .3554 .3463 .3451 .3554 .3371 .3490 .3529 .3597 .3548 .3736 .3641 .3804 .3521 .3615 .3670 .3578 .3702 .3722 .3825 .3798 3B 4B 5B Region x y .3616 .3463 .3687 .3551 .3533 .3620 .3451 .3554 .3615 .3659 .3641 .3804 .3736 .3874 .3659 .3702 .3702 .3722 .3736 .3874 .3869 .3958 3C 4C 5C Region x y .3687 .3451 .3554 .3760 .3533 .3620 .3515 .3487 .3440 .3428 .3590 .3521 .3615 .3659 .3702 .3722 .3722 .3670 .3578 .3825 .3798 .3783 .3646 .3869 .3958 .3825 .3798 .4006 .4044 .3950 .3875 3D 4D 5D .3783 .3646 .3825 .3798 .3950 .3875 .3898 .3716 .3889 .3690 .3941 .3848 .4080 .3916 .4017 .3751 .3941 .3848 .3996 .4015 .4146 .4089 .4080 .3916 .4080 .3916 .4146 .4089 .4299 .4165 .4221 .3984 .4017 .3751 .4080 .3916 .4221 .3984 .4147 .3814 .4147 .3814 .4221 .3984 .4342 .4028 .4259 .3853 .4221 .3984 .4299 .4165 .4430 .4212 .4342 .4028 .4342 .4028 .4430 .4212 .4562 .4260 .4465 .4071 6B 7B 6C 7C 6D 7D .4259 .3853 .4342 .4028 .4465 .4071 .4373 .3893 .4373 .3893 .4465 .4071 .4582 .4099 .4483 .3919 .4465 .4071 .4562 .4260 .4687 .4289 .4582 .4099 .4582 .4099 .4687 .4289 .4813 .4319 .4700 .4126 .4483 .3919 .4582 .4099 .4700 .4126 .4593 .3944 8B 8C 8D Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 5 XLamp ® XR Family LED Binning & Labeling Performance Groups – Dominant Wavelength Color XLamp LEDs are tested for dominant wavelength (DWL) and placed into one of the DWL groups defined below. Color Royal Blue Blue Green Amber Red-Orange Red DWL Group Minimum DWL (nm) @ 350 mA Maximum DWL (nm) @ 350 mA D3 450 455 D4 455 460 D5 460 465 B3 465 470 B4 470 475 B5 475 480 B6 480 485 G2 520 525 G3 525 530 G4 530 535 A2 585 590 A3 590 595 O3 610 615 O4 615 620 R2 620 625 R3 625 630 Performance Groups – Forward Voltage Amber, red-orange and red XLamp LEDs are tested for forward voltage and placed into one of the forward voltage groups defined below. Forward Voltage Group Minimum Forward Voltage @ 350 mA Maximum Forward Voltage @ 350 mA B 1.75 2.0 C 2.0 2.25 D 2.25 2.5 Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 6 XLamp ® XR Family LED Binning & Labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve 0.45 0.44 2900 K 0.43 2600 K 3000 K 3200 K 0.42 3500 K 7B 4000 K 0.40 6C 4300 K 0.39 0.37 4B 3C 0.36 3B 3D 0.35 8D 7A 6D 5B 4C 8A 7D 5C 4750 K 5300 K 0.38 6B 4500 K 5000 K 8C 8B 7C 3700 K 0.41 CCy 2700 K 6A 5D ANSI C78.377A 5A 4D 4A 3A 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 7 XLamp ® XR Family LED Binning & Labeling Standard Order Codes and Bins (XR-C Cool White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp XR-C LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Kit Number Flux (lm) Cool White (5000 K – 10,000 K) P3 P4 Q2 Q3 73.9 80.6 87.4 93.9 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00801 WC, WD, WF, WG 00802 WC, WD, WF, WG, WH, WJ, WN, WP 00803 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00901 WC, WD, WF, WG 00902 WC, WD, WF, WG, WH, WJ, WN, WP 00903 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00A01 WC, WD, WF, WG 00A02 WC, WD, WF, WG, WH, WJ, WN, WP 00A03 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00B01 WC, WD, WF, WG 00B02 WC, WD, WF, WG, WH, WJ, WN, WP 00B03 For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 8 XLamp ® XR Family LED Binning & Labeling Standard Order Codes and Bins (XR-C Neutral White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp XR-C LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Flux (lm) N3 56.8 Chromaticity Regions Kit Number CCT Neutral White (3700 K – 5000 K) N4 P2 P3 P4 Q2 62.0 67.2 73.9 80.6 87.4 5C, 5D, 6A, 6B 005F6 3700 K 4A, 4B, 4C, 4D 006F5 4300 K 5A, 5B, 5C, 5D 006E5 4000 K 5C, 5D, 6A, 6B 006F6 3700 K 3A, 3B, 3C, 3D 007E3 5000 K 4750 K 3C, 3D, 4A, 4B 007F4 4A, 4B, 4C, 4D 007E4 4500 K 4C, 4D, 5A, 5B 007F5 4300 K 5A, 5B, 5C, 5D 007E5 4000 K 5C, 5D, 6A, 6B 007F6 3700 K 3A, 3B, 3C, 3D 008E3 5000 K 4750 K 3C, 3D, 4A, 4B 008F4 4A, 4B, 4C, 4D 008E4 4500 K 4C, 4D, 5A, 5B 008F5 4300 K 5A, 5B, 5C, 5D 008E5 4000 K 3700 K 5C, 5D, 6A, 6B 008F6 3A, 3B, 3C, 3D 009E3 5000 K 3C, 3D, 4A, 4B 009F4 4750 K 4A, 4B, 4C, 4D 009E4 4500 K 4C, 4D, 5A, 5B 009F5 4300 K 5A, 5B, 5C, 5D 009E5 4000 K 3A, 3B, 3C, 3D 00AE3 5000 K 3C, 3D, 4A, 4B 00AF4 4750 K 4A, 4B, 4C, 4D 00AE4 4500 K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 9 XLamp ® XR Family LED Binning & Labeling Standard Order Codes and Bins (XR-C Warm White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp XR-C LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Kit Number CCT Flux (lm) Warm White (2600 K – 3700 K) N2 N3 N4 P2 P3 51.7 56.8 62.0 67.2 73.9 7C, 7D, 8A, 8B 004F8 2900 K 8A, 8B, 8C, 8D 004E8 2700 K 6A, 6B, 6C, 6D 005E6 3500 K 6C, 6D, 7A, 7B 005F7 3200 K 7A, 7B, 7C, 7D 005E7 3000 K 2900 K 7C, 7D, 8A, 8B 005F8 8A, 8B, 8C, 8D 005E8 2700 K 6A, 6B, 6C, 6D 006E6 3500 K 3200 K 6C, 6D, 7A, 7B 006F7 7A, 7B, 7C, 7D 006E7 3000 K 7C, 7D, 8A, 8B 006F8 2900 K 8A, 8B, 8C, 8D 006E8 2700 K 6A, 6B, 6C, 6D 007E6 3500 K 6C, 6D, 7A, 7B 007F7 3200 K 7A, 7B, 7C, 7D 007E7 3000 K 6A, 6B, 6C, 6D 008E6 3500 K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 10 XLamp ® XR Family LED Binning & Labeling Standard Order Codes and Bins (XR-C Color) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s dominantwavelength range and luminous- or radiant-flux range. XLamp XR-C LED Standard Order Codes - Royal Blue Color Dominant Wavelength (nm) Minimum Radiant Flux (mW) @ 350 mA* Group 12 Flux (mW) 250 Royal Blue 13 300 Minimum Maximum Kit Number Group DWL (nm) Group DWL (nm) D3 450 D5 465 00701 D3 450 D4 460 00702 D4 455 D5 465 00703 D3 450 D5 465 00801 D3 450 D4 460 00802 D4 455 D5 465 00803 For other flux and dominant wavelength combinations, contact Cree or an authorized distributor. * Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 11 XLamp ® XR Family LED Binning & Labeling Standard Order Codes and Bins (XR-C Color) - Continued XLamp XR-C LED Standard Order Codes - Blue, Green, Amber, Red-Orange, Red Color Blue Maximum Kit Number Flux (lm) Group DWL (nm) Group DWL (nm) G 13.9 B3 465 B4 475 00G01 H 18.1 B3 465 B4 475 00H01 G2 520 G4 535 00M01 M 39.8 G2 520 G3 530 00M02 G3 525 G4 535 00M03 N 51.7 J 23.5 K2 30.6 M2 K2 39.8 30.6 Red-Orange M2 J Red Minimum Group Green Amber Dominant Wavelength (nm) Minimum Luminous Flux (lm) @ 350 mA* K2 M2 39.8 23.5 30.6 39.8 G2 520 G4 535 00N01 G2 520 G3 530 00N02 G3 525 G4 535 00N03 A2 585 A3 595 00J01 A3 590 A3 595 00J03 A2 585 A3 595 00K01 A3 590 A3 595 00K03 A2 585 A3 595 00M01 A3 590 A3 595 00M03 O3 610 O4 620 00K01 O3 610 O3 615 00K02 O4 615 O4 620 00K03 O3 610 O4 620 00M01 O3 610 O3 615 00M02 O4 615 O4 620 00M03 R2 620 R3 630 00J01 R2 620 R2 625 00J02 R2 620 R3 630 00K01 R2 620 R2 625 00K02 R2 620 R3 630 00M01 R2 620 R2 625 00M02 For other flux and dominant wavelength combinations, contact Cree or an authorized distributor. * Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 12 XLamp ® XR Family LED Binning & Labeling Standard Order Codes and Bins (XR-E Cool White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp XR-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Kit Number Flux (lm) Cool White (5000 K – 10,000 K) P4 Q2 Q3 Q4 Q5 R2 80.6 87.4 93.9 100 107 114 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00901 WC, WD, WF, WG 00902 WC, WD, WF, WG, WH, WJ, WN, WP 00903 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00A01 WC, WD, WF, WG 00A02 WC, WD, WF, WG, WH, WJ, WN, WP 00A03 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00B01 WC, WD, WF, WG 00B02 WC, WD, WF, WG, WH, WJ, WN, WP 00B03 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00C01 WC, WD, WF, WG 00C02 WC, WD, WF, WG, WH, WJ, WN, WP 00C03 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00D01 WC, WD, WF, WG 00D02 WC, WD, WF, WG, WH, WJ, WN, WP 00D03 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00E01 WC, WD, WF, WG 00E02 WC, WD, WF, WG, WH, WJ, WN, WP 00E03 For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 13 XLamp ® XR Family LED Binning & Labeling Standard Order Codes and Bins (XR-E Neutral White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp XR-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Flux (lm) N4 62.0 Chromaticity Regions Kit Number CCT 5C, 5D, 6A, 6B 006F6 3700 K 4C, 4D, 5A, 5B 007F5 4300 K 5A, 5B, 5C, 5D 007E5 4000 K 5C, 5D, 6A, 6B 007F6 3700 K 3A, 3B, 3C, 3D 008E3 5000 K 4750 K Neutral White (3700 K - 5000 K) P2 P3 P4 Q2 Q3 Q4 67.2 73.9 80.6 87.4 93.9 100 3C, 3D, 4A, 4B 008F4 4A, 4B, 4C, 4D 008E4 4500 K 4C, 4D, 5A, 5B 008F5 4300 K 5A, 5B, 5C, 5D 008E5 4000 K 5C, 5D, 6A, 6B 008F6 3700 K 3A, 3B, 3C, 3D 009E3 5000 K 4750 K 3C, 3D, 4A, 4B 009F4 4A, 4B, 4C, 4D 009E4 4500 K 4C, 4D, 5A, 5B 009F5 4300 K 5A, 5B, 5C, 5D 009E5 4000 K 5C, 5D, 6A, 6B 009F6 3700 K 3A, 3B, 3C, 3D 00AE3 5000 K 3C, 3D, 4A, 4B 00AF4 4750 K 4A, 4B, 4C, 4D 00AE4 4500 K 4C, 4D, 5A, 5B 00AF5 4300 K 5A, 5B, 5C, 5D 00AE5 4000 K 5C, 5D, 6A, 6B 00AF6 3700 K 3A, 3B, 3C, 3D 00BE3 5000 K 3C, 3D, 4A, 4B 00BF4 4750 K 4A, 4B, 4C, 4D 00BE4 4500 K 4C, 4D, 5A, 5B 00BF5 4300 K 5A, 5B, 5C, 5D 00BE5 4000 K 3A, 3B, 3C, 3D 00CE3 5000 K 3C, 3D, 4A, 4B 00CF4 4750 K 4A, 4B, 4C, 4D 00CE4 4500 K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 14 XLamp ® XR Family LED Binning & Labeling Standard Order Codes and Bins (XR-E Warm White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp XR-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Kit Number CCT 6C, 6D, 7A, 7B 005F7 3200 K 7A, 7B, 7C, 7D 005E7 3000 K 2900 K Flux (lm) Warm White (2600 K - 3700 K) N3 N4 P2 P3 56.8 62.0 67.2 73.9 7C, 7D, 8A, 8B 005F8 8A, 8B, 8C, 8D 005E8 2700 K 6A, 6B, 6C, 6D 006E6 3500 K 3200 K 6C, 6D, 7A, 7B 006F7 7A, 7B, 7C, 7D 006E7 3000 K 7C, 7D, 8A, 8B 006F8 2900 K 8A, 8B, 8C, 8D 006E8 2700 K 6A, 6B, 6C, 6D 007E6 3500 K 6C, 6D, 7A, 7B 007F7 3200 K 7A, 7B, 7C, 7D 007E7 3000 K 7C, 7D, 8A, 8B 007F8 2900 K 8A, 8B, 8C, 8D 007E8 2700 K 6A, 6B, 6C, 6D 008E6 3500 K 3200 K 6C, 6D, 7A, 7B 008F7 7A, 7B, 7C, 7D 008E7 3000 K 7C, 7D, 8A, 8B 008F8 2900 K 8A, 8B, 8C, 8D 008E8 2700 K 6A, 6B, 6C, 6D 009E6 3500 K 009F7 3200 K P4 80.6 6C, 6D, 7A, 7B 7A, 7B, 7C, 7D 009E7 3000 K Q2 87.4 6A, 6B, 6C, 6D 00AE6 3500 K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 15 XLamp ® XR Family LED Binning & Labeling Standard Order Codes and Bins (XR-E Color) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s dominantwavelength range and luminous- or radiant-flux range. XLamp XR-E LED Standard Order Codes - Royal Blue Color Dominant Wavelength (nm) Minimum Radiant Flux (mW) @ 350 mA* Group 12 13 Flux (mW) 250 300 Royal Blue 14 15 350 425 Minimum Maximum Kit Number Group DWL (nm) Group DWL (nm) D3 450 D5 465 00701 D3 450 D4 460 00702 D4 455 D5 465 00703 D3 450 D5 465 00801 D3 450 D4 460 00802 D4 455 D5 465 00803 D3 450 D5 465 00901 D3 450 D4 460 00902 D4 455 D5 465 00903 D3 450 D5 465 00A01 D3 450 D4 460 00A02 D4 455 D5 465 00A03 XLamp XR-E LED Standard Order Codes - Blue and Green Color Group J Flux (mW) 23.5 Blue K Green Dominant Wavelength (nm) Minimum Radiant Flux (mW) @ 350 mA* P 30.6 67.2 Minimum Maximum Kit Number Group DWL (nm) Group DWL (nm) B3 465 B6 485 00J01 B3 465 B5 480 00J02 B4 470 B5 480 00J03 B3 465 B4 475 00J04 B3 465 B6 485 00K01 B3 465 B5 480 00K02 B4 470 B5 480 00K03 B3 465 B4 475 00K04 G2 520 G4 535 00P01 G2 520 G3 530 00P02 G3 525 G4 535 00P03 For other flux and dominant wavelength combinations, contact Cree or an authorized distributor. * Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2004-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 16