CLD-AP147 rev 2G Binning & Labeling Cree® XLamp® XH Family LEDs Table of Contents Introduction Introduction................................................................................... 1 This document describes the product nomenclature required Bin and Order-Code Format.......................................................... 2 to select and order Cree’s XLamp® XH Family LEDs. XLamp Performance Groups – Luminous Flux....................................... 2 XH Family LEDs are tested and sorted into bins which are then Performance Groups – Chromaticity........................................... 3 combined into orderable kits identified by an order code. Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve.............................................................................. 6 All XLamp LEDs are tested and sorted by color and brightness Cree’s Standard Cool White Kits Plotted on ANSI Standard into a unique bin. Each bin contains LEDs from only one color and Chromaticity Regions................................................................... 8 brightness group and is uniquely identified by a bin code. White Cree’s Standard Warm and Neutral White Kits Plotted on XLamp LEDs are sorted by chromaticity (color) and luminous ANSI Standard Chromaticity Regions.......................................... 9 flux (brightness). LEDs are shipped on reels containing LEDs Cree’s Standard Chromaticity Kits............................................. 11 from one bin and are always labeled with the appropriate bin Standard Order Codes and Bins code. XH-B ANSI Cool White......................................................... 12 XH-B Neutral White.............................................................. 12 Kits contain LEDs from a number of similar bins and are fully XH-B Warm White................................................................ 13 defined by their order codes. A full explanation of the order XH-G ANSI Cool White......................................................... 14 codes for XLamp XH Family LEDs, as well as a list of standard XH-G Neutral White............................................................. 14 order codes, is provided in this document. www.cree.com/Xlamp XH-G Warm White................................................................ 15 Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® XH Family LED Binning & Labeling Bin and Order-Code Format Bin codes and order codes for XH Family White LEDs are configured in the following manner: Order Code Bin Code Series XHB = XH-B XHG = XH-G Series XHB = XH-B XHG = XH-G Configuration B: Internal code D: Reel size 0 = 1,000 pcs 2 = 250 pcs Internal code Luminous flux group Color specification 0 = No minimum CRI B = 70 CRI minimum L = Standard CRI H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Color specification 0 = No minimum CRI B = 70 CRI minimum L = Standard CRI H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum SSSCCC-B-WWW-FFF-VR-AAAA Internal code Chromaticity kit Voltage performance group SSSCCC-BD-HHHH-NNNNVRFGG Flux Chromaticity bin Voltage specification Color AWT = White Internal code Color AWT = White Performance Groups – Luminous Flux (TJ = 25 °C) XLamp XH Family White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. These group codes, with a 0 appended, are used in the Bin Code “Luminous flux group.” Group Code Min. Luminous Flux (lm) H0 18.1 Max. Luminous Flux (lm) 23.5 J2 23.5 26.8 J3 26.8 30.6 K2 30.6 35.2 K3 35.2 39.8 Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 2 XLamp ® XH Family LED Binning & Labeling Performance Groups – Chromaticity XLamp XH Family White LEDs are tested for luminous flux and placed into one of the following chromaticity groups. These group codes are used in the Bin Code “Chromaticity bin.” Two-digit group codes are appended with a 0. Region 0A 0R 1A 1R 2A 2R 3A 3R 4A x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.3042 0.2980 0.2950 0.3009 0.3042 0.3037 0.3048 0.3130 0.3290 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 0.2993 Region x y 0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.2984 0.3133 0.2880 0.2895 0.2970 0.2870 0.2937 0.3312 0.2937 0.2962 0.3207 0.3028 0.3115 0.3391 0.3130 0.3290 0.3113 0.3048 0.3113 0.3005 0.3099 0.3509 0.3115 0.3391 0.3028 0.3304 0B 0S 1B 1S Region x y 0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3048 0.3207 0.3135 0.2962 0.3210 0.2937 0.3005 0.3415 0.3220 0.3028 0.3304 0.3115 0.3205 0.3481 0.3213 0.3373 0.3207 0.3130 0.3415 0.3099 0.3196 0.3602 0.3205 0.3481 0.3115 0.3391 0C 0T 1C 1T Region x y 0.2984 0.3133 0.3048 0.3207 0.3068 0.3113 0.3009 0.3042 0.3220 0.3037 0.2937 0.3312 0.3009 0.3042 0.3068 0.3113 0.3304 0.3093 0.2993 0.3391 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3290 0.3144 0.3186 0.3509 0.3144 0.3186 0.3221 0.3261 0.3231 0.3120 0.3161 0.3059 0D 0U 1D 1U 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369 0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245 0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180 0.3371 0.3490 0.3376 0.3616 0.3463 0.3687 0.3451 0.3554 0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620 0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427 0.3366 0.3369 0.3381 0.3762 0.3480 0.3840 0.3440 0.3428 0.3440 0.3428 0.3480 0.3840 0.3571 0.3907 0.3515 0.3487 0.3429 0.3307 0.3463 0.3687 0.3551 0.3760 0.3495 0.3339 0.3361 0.3245 0.3376 0.3616 0.3463 0.3687 0.3429 0.3307 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659 0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521 2B 2S 3B 3S 4B 2C 2T 3C 3T 4C 2D 2U 3D 3U 4D Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 3 XLamp ® XH Family LED Binning & Labeling Performance Groups – Chromaticity (continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 7B1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 Region 5A2 x y 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 Region 5A3 x y 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 Region 5A4 x y 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 0.3702 0.3722 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 5B2 5C2 5D2 5B3 5C3 5D3 5B4 5C4 5D4 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 6A2 6B2 6A3 6B3 6A4 6B4 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 0.4203 0.3833 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939 6C2 6D2 7A2 6C3 6D3 7A3 6C4 6D4 7A4 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 7B2 7B3 7B4 Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 4 XLamp ® XH Family LED Binning & Labeling Performance Groups – Chromaticity (continued) Region 7C1 7D1 8A1 8B1 8C1 8D1 AA1 AB1 AC1 AD1 x y 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4403 0.4259 0.4300 0.3939 0.4359 0.3960 0.4316 0.3873 0.4373 0.4418 0.4475 0.3994 0.4428 0.3906 0.4465 0.4071 0.4513 0.4164 0.4573 0.4178 Region x y 0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4049 0.4449 0.3853 0.4300 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960 0.3893 0.4418 0.3981 0.4465 0.4523 0.4085 0.4475 0.3994 0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 7C2 7D2 8A2 8B2 Region x y 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4141 0.4513 0.3939 0.4359 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.3981 0.4475 0.4071 0.4523 0.4582 0.4099 0.4532 0.4008 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 7C3 7D3 8A3 8B3 Region x y 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4164 0.4465 0.4071 0.3960 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.3994 0.4428 0.3906 0.4085 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 7C4 7D4 8A4 8B4 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 0.4582 0.4099 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4483 0.3919 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 8C2 8D2 8C3 8D3 8C4 8D4 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 0.4822 0.3973 0.4884 0.4067 0.4942 0.4066 0.4879 0.3972 0.4884 0.4067 0.4946 0.4162 0.5006 0.4160 0.4942 0.4066 0.4942 0.4066 0.5006 0.4160 0.5066 0.4158 0.5001 0.4064 0.4879 0.3972 0.4942 0.4066 0.5001 0.4064 0.4936 0.3970 0.4946 0.4162 0.5008 0.4256 0.5069 0.4254 0.5006 0.4160 0.5008 0.4256 0.5070 0.4350 0.5133 0.4348 0.5069 0.4254 0.5069 0.4254 0.5133 0.4348 0.5196 0.4346 0.5131 0.4252 0.5006 0.4160 0.5069 0.4254 0.5131 0.4252 0.5066 0.4158 0.5066 0.4067 0.5131 0.4252 0.5192 0.4250 0.5126 0.4156 0.5131 0.4162 0.5196 0.4346 0.5258 0.4343 0.5192 0.4250 0.5192 0.4160 0.5258 0.4343 0.5321 0.4341 0.5253 0.4248 AA2 AB2 AC2 AA3 AB3 AC3 AA4 AB4 AC4 0.5126 0.4066 0.5192 0.4250 0.5253 0.4248 0.5186 0.4154 0.4936 0.3970 0.5001 0.4064 0.5059 0.4062 0.4993 0.3969 0.5001 0.4064 0.5066 0.4158 0.5126 0.4156 0.5059 0.4062 0.5059 0.4062 0.5126 0.4156 0.5186 0.4154 0.5118 0.4061 0.4993 0.3969 0.5059 0.4062 0.5118 0.4061 0.5050 0.3967 AD2 AD3 AD4 Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 5 XLamp ® XH Family LED Binning & Labeling Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 3S 0.37 6500 K 2T 0.36 0.35 CCy 3B 2S 2C 1T 8000 K 1S 0.34 0S 0.32 0.31 3R 2A 1B 1D 0C 0B 2D 1C 0T 0.33 3A 2B 2U ANSI C78.377A 2R 1A 1U 0D 1R 0A 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx ANSI Neutral White and ANSI Warm White 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K CCy 6C3 4500 K 6C2 6B3 0.40 6B2 5C3 5000 K 0.39 5B3 5C4 5B4 0.38 5B1 4C 0.37 5A2 4B 7A1 7A4 7A3 7D1 7D4 7D3 8A1 8A3 8A2 8A4 4D 8D1 8B4 8D2 8C2 8C1 8C3 8C4 8D3 8D4 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.36 5D2 5A3 6D2 6A3 6A2 5D3 7A2 6D3 6B1 5C1 5B2 6C1 6B4 5C2 7D2 8B1 7C4 7C1 7B4 7B1 6C4 7C2 7B3 7B2 0.41 8B3 8B2 7C3 5A1 3B 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 6 XLamp ® XH Family LED Binning & Labeling Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve - Continued ANSI Neutral White and ANSI Warm White - Continued 0.45 0.44 3000 K 0.43 0.42 CCy 8B1 7C4 0.41 0.40 7C3 7C2 7D3 8A1 8A3 8A2 8A4 8D1 8B3 8B2 8B4 8D2 8C1 8C2 2200 K 2450 K 2700 K AB2 AB3 AC2 AB1 AB4 AC1 AC4 AA3 AD2 8C3 AC3 8C4 AA2 AD3 8D3 AA1 AA4 AD1 8D4 AD4 0.39 0.38 0.37 0.55 0.54 0.53 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.36 CCx Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 7 XLamp ® XH Family LED Binning & Labeling Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 3S 51 6500 K 0.36 0T 0C 0B 0A 0S CCy 0.32 0C 0B 0.31 1R 1R 0U 0.36 0.35 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.30 0.28 0.29 0.28 0.28 0.29 0.29 1U 0R 0.29 0.28 ANSI C78.377A 2R 1A 0.30 0R CCx CCx 0.40 0.40 5000 K 0.39 5000 K 0.39 0.38 0.38 5700 K 3S 50 0.37 6500 K 0.36 8000 K CCy 1U 0A 0R ANSI C78.377A 2R 1U 1R 0U 0.36 0.35 0.28 0.35 0.34 0.33 0.32 0.31 CCx 0.34 0.28 0.36 0.28 0.30 2U 0R 0.29 0.29 1D 1A 0D 0.30 0.29 0.28 0C 0B 0.31 1R 0U 0.30 0S 0.32 3R 2A 1B 0.33 0A ANSI C78.377A 2R 1A 0D 0T 0.33 2U 3A 2D 1C 0.32 0.31 1D 2C 2B 1S 0.31 0C 0B 3R 2A 1B 3B 2S 1T 8000 K 0.34 0.30 0S 0.32 3A 2D 1C 2T E1 0.35 0.29 0T 0.33 0.36 3B 2B 1S 3S 6500 K 2C 1T 0.34 5700 K 0.37 2T 2S 0.35 CCy 2U 1D 0D 0A 0U 3R 2A 1B 0.34 0.30 1U 2D 1C 0.33 0.31 ANSI C78.377A 2R 1A 0D 0T 3A 2B 1S 0.33 2U 1D 0.34 0.32 0S 0.32 3R 2A 1B 8000 K 2D 3B 2C 1T 3A 2B 1C 3S 2T 2S 0.35 0.31 0.33 0.36 3B 1T 1S 53 6500 K 2C 8000 K 0.34 5700 K 0.37 2T 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx 0.40 5000 K 0.39 0.38 5700 K E2 0.37 6500 K 0.36 3B 2S 0.35 CCy 3S 2T 2C 1T 8000 K 0.34 0T 0.33 0S 0.32 0C 0A 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 2D 1C 1B 0B 0.31 3A 2B 1S 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 8 XLamp ® XH Family LED Binning & Labeling Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 E4 6D2 5D3 6D4 7A4 7A1 8A4 8A1 7D4 7D1 8A3 8A2 7D3 7D2 7A3 7A2 6D3 6A3 6A2 8D1 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 6A4 6A1 5D4 5D1 ANSI C78.377A 5A4 3B 8B3 8B2 6D1 5D2 5A2 3C 5A1 4D 0.36 5C4 5B4 5A3 4B 6B1 5C1 5B1 4C 6C1 6B4 8B1 7C4 7C1 7B4 7B1 6C4 6B2 5C3 5C2 5B3 5B2 6C2 6B3 7C2 7B3 7B2 6C3 7C3 E8 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 4500 K CCy 0.40 0.39 F4 0.38 0.37 6B1 5C4 6A2 5D3 7A2 6D3 6D2 6A3 5D2 5A3 5A2 4B 6D4 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8A2 8A4 8A3 8D1 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 4D 3B 5B1 6C1 7C1 7B4 7B1 6C4 6B4 5C1 5B4 3C 0.36 5B3 5B2 4C 6C2 8B1 7C4 8B3 8B2 7C3 7C2 7B3 7B2 6B2 5C3 5C2 F7 6C3 6B3 F5 5000 K F6 F8 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 9 XLamp ® XH Family LED Binning & Labeling Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued 0.45 0.44 3000 K 0.43 0.42 CCy 8B1 7C4 0.41 0.40 7C3 7C2 7D3 8A1 8A3 8A2 8A4 8D1 8B3 8B2 8B4 8D2 8C1 8C2 EA 2450 K 2700 K 2200 K AB2 AB3 AC2 AB4 AC1 AC4 8C3 AB1 AC3 8C4 AA2 AA3 AD2 AD3 8D3 AA1 AA4 AD1 8D4 AD4 0.39 0.38 0.37 0.55 0.54 0.53 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.36 CCx Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 10 XLamp ® XH Family LED Binning & Labeling Cree’s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color Cool White Neutral White Warm White CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3750 K F6 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2850 K F8 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 2200 K EA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4 The following tables of order codes list flux minimums and chromaticity regions for the various categories of XLamp XH LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor. Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 11 XLamp ® XH Family LED Binning & Labeling Standard Order Codes and Bins (XH-B ANSI Cool White, TJ = 25 °C) XLamp XH-B LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 65 mA Order Codes Code Flux (lm) No Minimum CRI J3 26.8 XHBAWT-00-0000-00000LXE1 J2 23.5 J3 26.8 J2 23.5 J3 26.8 J2 23.5 J3 26.8 J2 23.5 J3 26.8 J2 23.5 70 CRI Minimum 80 CRI Minimum ANSI Cool White (5000 K – 8300 K) E1 6500 K 50 6000 K 51 6000 K 53 5700 K E2 5700 K XHBAWT-00-0000-00000BXE1 XHBAWT-00-0000-00000HXE1 XHBAWT-00-0000-00000HWE1 XHBAWT-00-0000-00000LX50 XHBAWT-00-0000-00000BX50 XHBAWT-00-0000-00000LX51 XHBAWT-00-0000-00000BX51 XHBAWT-00-0000-00000HX50 XHBAWT-00-0000-00000HW50 XHBAWT-00-0000-00000HX51 XHBAWT-00-0000-00000HW51 XHBAWT-00-0000-00000LX53 XHBAWT-00-0000-00000BX53 XHBAWT-00-0000-00000HX53 XHBAWT-00-0000-00000HW53 XHBAWT-00-0000-00000LXE2 XHBAWT-00-0000-00000BXE2 XHBAWT-00-0000-00000HXE2 XHBAWT-00-0000-00000HWE2 Standard Order Codes and Bins (XH-B Neutral White, TJ = 25 °C) XLamp XH-B LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 65 mA Code Flux (lm) Order Codes 70 CRI Minimum 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 5000 K F4 4750 K E4 4500 K F5 4300 K E5 4000 K J3 26.8 J2 23.5 J3 26.8 J2 23.5 J3 26.8 J2 23.5 J3 26.8 J2 23.5 J3 26.8 J2 23.5 XHBAWT-00-0000-00000BXE3 XHBAWT-00-0000-00000LXE3 XHBAWT-00-0000-00000HXE3 XHBAWT-00-0000-00000HWE3 XHBAWT-00-0000-00000BXF4 XHBAWT-00-0000-00000LXF4 XHBAWT-00-0000-00000BXE4 XHBAWT-00-0000-00000LXE4 XHBAWT-00-0000-00000HXF4 XHBAWT-00-0000-00000HWF4 XHBAWT-00-0000-00000HXE4 XHBAWT-00-0000-00000HWE4 XHBAWT-00-0000-00000BXF5 XHBAWT-00-0000-00000LXF5 XHBAWT-00-0000-00000HXF5 XHBAWT-00-0000-00000LWF5 XHBAWT-00-0000-00000HWF5 XHBAWT-00-0000-00000BXE5 XHBAWT-00-0000-00000LXE5 XHBAWT-00-0000-00000HXE5 XHBAWT-00-0000-00000BWE5 XHBAWT-00-0000-00000LWE5 XHBAWT-00-0000-00000HWE5 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Cree XLamp XH Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 12 XLamp ® XH Family LED Binning & Labeling Standard Order Codes and Bins (XH-B Warm White, TJ = 25 °C) XLamp XH-B LED Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 65 mA Kit Code CCT Order Codes Flux (lm) 70 CRI Minimum J3 26.8 XHBAWT-00-000000000BXF6 J2 23.5 XHBAWT-00-000000000BWF6 J3 26.8 XHBAWT-00-000000000BXE6 J2 23.5 XHBAWT-00-000000000BWE6 J3 26.8 XHBAWT-00-000000000BXF7 J2 23.5 XHBAWT-00-000000000BWF7 H0 18.1 J3 26.8 XHBAWT-00-000000000BXE7 J2 23.5 XHBAWT-00-000000000BWE7 H0 18.1 J2 23.5 H0 18.1 J2 23.5 H0 18.1 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XHBAWT-00-000000000PVF7 XHBAWT-00-000000000UVF7 XHBAWT-00-000000000PVE7 XHBAWT-00-000000000UVE7 XHBAWT-00-000000000PVF8 XHBAWT-00-000000000UVF8 XHBAWT-00-000000000PVE8 XHBAWT-00-000000000UVE8 ANSI Warm White (2700 K - 3700 K) F6 E6 F7 E7 F8 E8 3700 K 3500 K 3200 K 3000 K 2850 K 2700 K XHBAWT-00-000000000BWF8 XHBAWT-00-000000000BWE8 XHBAWT-00-000000000LWF6 XHBAWT-00-000000000HWF6 XHBAWT-00-000000000LWE6 XHBAWT-00-000000000HWE6 XHBAWT-00-000000000LWF7 XHBAWT-00-000000000HWF7 XHBAWT-00-000000000LWE7 XHBAWT-00-000000000LWF8 XHBAWT-00-000000000LWE8 XHBAWT-00-000000000HWE7 XHBAWT-00-000000000HWF8 XHBAWT-00-000000000HWE8 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Cree XLamp XH Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 13 XLamp ® XH Family LED Binning & Labeling Standard Order Codes and Bins (XH-G ANSI Cool White, TJ = 25 °C) XLamp XH-G LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 65 mA Order Codes Code Flux (lm) No Minimum CRI 70 CRI Minimum K2 30.6 XHGAWT-00-0000-00000L0E1 XHGAWT-00-0000-00000B0E1 J3 26.8 XHGAWT-00-0000-00000LXE1 XHGAWT-00-0000-00000BXE1 K2 30.6 XHGAWT-00-0000-00000L050 XHGAWT-00-0000-00000B050 80 CRI Minimum ANSI Cool White (5000 K – 8300 K) E1 50 6500 K 6000 K 51 6000 K 53 5700 K E2 5700 K J3 26.8 XHGAWT-00-0000-00000LX50 XHGAWT-00-0000-00000BX50 K2 30.6 XHGAWT-00-0000-00000L051 XHGAWT-00-0000-00000B051 J3 26.8 XHGAWT-00-0000-00000LX51 XHGAWT-00-0000-00000BX51 K2 30.6 XHGAWT-00-0000-00000L053 XHGAWT-00-0000-00000B053 J3 26.8 XHGAWT-00-0000-00000LX53 XHGAWT-00-0000-00000BX53 K2 30.6 XHGAWT-00-0000-00000L0E2 XHGAWT-00-0000-00000B0E2 J3 26.8 XHGAWT-00-0000-00000LXE2 XHGAWT-00-0000-00000BXE2 XHGAWT-00-0000-00000HXE1 XHGAWT-00-0000-00000HX50 XHGAWT-00-0000-00000HX51 XHGAWT-00-0000-00000HX53 XHGAWT-00-0000-00000HXE2 Standard Order Codes and Bins (XH-G Neutral White, TJ = 25 °C) XLamp XH-G LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 65 mA Code Flux (lm) Order Codes 70 CRI Minimum 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 5000 K F4 4750 K E4 4500 K F5 E5 4300 K 4000 K K2 30.6 XHGAWT-00-0000-00000B0E3 XHGAWT-00-0000-00000L0E3 J3 26.8 XHGAWT-00-0000-00000BXE3 XHGAWT-00-0000-00000LXE3 XHGAWT-00-0000-00000HXE3 K2 30.6 XHGAWT-00-0000-00000B0F4 J3 26.8 XHGAWT-00-0000-00000BXF4 XHGAWT-00-0000-00000LXF4 XHGAWT-00-0000-00000HXF4 K2 30.6 XHGAWT-00-0000-00000B0E4 J3 26.8 XHGAWT-00-0000-00000BXE4 XHGAWT-00-0000-00000LXE4 XHGAWT-00-0000-00000HXE4 K2 30.6 XHGAWT-00-0000-00000B0F5 XHGAWT-00-0000-00000LXF5 XHGAWT-00-0000-00000HXF5 XHGAWT-00-0000-00000LXE5 XHGAWT-00-0000-00000HXE5 J3 26.8 XHGAWT-00-0000-00000BXF5 K2 30.6 XHGAWT-00-0000-00000B0E5 J3 26.8 XHGAWT-00-0000-00000BXE5 XHGAWT-00-0000-00000H0E5 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Cree XLamp XH Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 14 XLamp ® XH Family LED Binning & Labeling Standard Order Codes and Bins (XH-G Warm White, TJ = 25 °C) XLamp XH-G LED Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 65 mA Kit Code CCT Order Codes Flux (lm) 70 CRI Minimum XHGAWT-00-000000000LXF6 XHGAWT-00-000000000HXF6 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XHGAWT-00-000000000PVF7 XHGAWT-00-000000000UVF7 XHGAWT-00-000000000PVE7 XHGAWT-00-000000000UVE7 XHGAWT-00-000000000PVF8 XHGAWT-00-000000000UVF8 XHGAWT-00-000000000PVE8 XHGAWT-00-000000000UVE8 ANSI Warm White (2700 K - 3700 K) F6 3700 K J3 26.8 XHGAWT-00-000000000BXF6 E6 3500 K J3 26.8 XHGAWT-00-000000000BXE6 XHGAWT-00-000000000LXE6 XHGAWT-00-000000000HXE6 J3 26.8 XHGAWT-00-000000000BXF7 XHGAWT-00-000000000LXF7 XHGAWT-00-000000000HXF7 J2 23.5 H0 18.1 J3 26.8 J2 23.5 H0 18.1 J3 26.8 J2 23.5 H0 18.1 J3 26.8 J2 23.5 H0 18.1 F7 E7 F8 E8 3200 K 3000 K 2850 K 2700 K XHGAWT-00-000000000HWF7 XHGAWT-00-000000000BXE7 XHGAWT-00-000000000LXE7 XHGAWT-00-000000000HXE7 XHGAWT-00-000000000HWE7 XHGAWT-00-000000000BXF8 XHGAWT-00-000000000BXE8 XHGAWT-00-000000000LXF8 XHGAWT-00-000000000HXF8 XHGAWT-00-000000000LWF8 XHGAWT-00-000000000HWF8 XHGAWT-00-000000000LXE8 XHGAWT-00-000000000HXE8 XHGAWT-00-000000000LWE8 XHGAWT-00-000000000HWE8 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Cree XLamp XH Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 15