• Universal Input (85 - 265VAC) • Power Factor Corrected • Convection Cooled • 5 year warranty • Compact Design Key Market Segments & Applications Factory Automation Test & Measurement Light Industrial Equipment ZWS-BAF Series 50W to 150W Single Output Power Supplies, Low Cost, Worldwide Use ZWS-BAF Features and Benefits Features Benefits • Convection Cooled • Better Field Reliability • 5 Year Warranty • Lower Cost of Ownership • Power Factor Corrected • Supports Global Use Specifications MODELS ITEMS AC Input Voltage range DC Input Voltage range Input Current (Typical) (2) A Inrush Current (2) A Power Factor (Active) Maximum Ripple and Noise mV Temperature Coefficient Overcurrent Protection (1) Hold Up Time (Typ) at 100VAC ms Leakage Current Remote On / Off Operating Temperature (Convection) Operating Temperature (Forced Air) Storage Temperature °C Humidity (non condensing) Withstand Voltage Isolation Resistance Vibration (non operating) Shock Safety Agency Certifications Conducted & Radiated EMI Immunity Weight (Typ) g Size (W x H x D) mm Warranty yrs Notes: (1) Avoid prolonged operation in overload ZWS50BAF ZWS75BAF ZWS100BAF ZWS150BAF 85-265VAC (47-63Hz) 120 - 370VDC 0.45 / 0.25 1.0 / 0.5 1.3 / 0.65 1.9 / 0.95 14 / 28 25°C ambient, cold start Meets EN61000-3-2 (Typically 0.98/0.93) 3.3 & 5V: 120mV, 12 to 24V: 150mV, 48V: 200mV <0.02%/°C >105% of maximum output current 20ms 0.5mA max, 0.4mA typ at 230VAC Optional -10 to +70°C, derate linearly to 50% load from 50 to 70°C -10 to +70°C, derate linearly to 75% load from 60 to 70°C -30 to +75°C Operating: 30 - 90%RH, storage: 10 - 90%RH I/P to Grnd 2kVAC (10mA), I/P to O/P 3kVAC (10mA), O/P to Grnd 500VAC (20mA) for 1 min. >100MΩ at 25°C & 70%RH, Output to Ground 500VDC 10 - 55Hz (1 minute sweep), 19.6m/s2 constant X, Y, Z 1 hour < 196.1 m/s2 UL60950-1, CSA60950-1, EN60950-1, EN50178 (OV II), CE Mark EN55011/EN55022-B, FCC-B, VCCI-B IEC61000-4-2 (lv 2,3), -3 (lv3), -4 (lv 3), 50/75W: -5 (lv4); 100/150W: -5 (lv 3,4), -6 (lv 3), -8 (lv 4), -11 165 230 290 390 50 x 26 x 132 50 x 33 x 150 62 x 33 x 155 75 x 37 x 160 5 (2) 100 / 200VAC Input ZWS-BAF Series 1 Model Selector Model ZWS50BAF-3 ZWS50BAF-5 ZWS50BAF-12 ZWS50BAF-15 ZWS50BAF-24 ZWS50BAF-48 ZWS75BAF-3 ZWS75BAF-5 ZWS75BAF-12 ZWS75BAF-15 ZWS75BAF-24 ZWS75BAF-48 ZWS100BAF-3 ZWS100BAF-5 ZWS100BAF-12 ZWS100BAF-15 ZWS100BAF-24 ZWS100BAF-48 ZWS150BAF-3 ZWS150BAF-5 ZWS150BAF-12 ZWS150BAF-15 ZWS150BAF-24 ZWS150BAF-48 Output Voltage Output Adjust Range (V) Max Current (A) Max Output Power(W) Efficiency (typ) % Load Reg (mV) Line Reg (mV) OVP (V) 3.3V 5V 12V 15V 24V 48V 3.3V 5V 12V 15V 24V 48V 3.3V 5V 12V 15V 24V 48V 3.3V 5V 12V 15V 24V 48V 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 43.2-52.8 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 43.2-52.8 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 39.5-52.8 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 39.5-52.8 10 10 4.3 3.5 2.1 1.1 15 15 6.3 5 3.2 1.6 20 20 8.5 6.7 4.3 2.1 30 30 12.5 10 6.3 3.2 33 50 51.6 52.5 50.4 52.8 49.5 75 75 75 76.8 76.8 66 100 102 100.5 103.2 100.8 99 150 150 150 151.2 153.6 79 84 85 86 87 87 79 84 85 86 87 88 84 86 88 88 89 90 84 87 88 89 90 91 40 40 96 120 150 240 40 40 96 120 150 240 40 40 96 120 150 240 40 40 96 120 150 240 20 20 48 60 96 192 20 20 48 60 96 192 20 20 48 60 96 192 20 20 48 60 96 192 3.8-4.95 5.75-7 13.8-16.2 17.3-20.3 27.6-32.4 55.2-64.8 3.8-4.95 5.75-7 13.8-16.2 17.3-20.3 27.6-32.4 55.2-64.8 3.79-4.95 5.75-7 13.8-16.2 17.3-20.3 27.6-32.4 55.2-64.8 3.79-4.95 5.75-7 13.8-16.2 17.3-20.3 27.6-32.4 55.2-64.8 Note: ZWS50 & 75 available Q1 2011 Outline Drawing ZWS50BAF ZWS50BAF-5 INPUT 100-240VAC 50/60Hz OUTPUT 5 V 10 A 0.67 A MADE IN JAPAN Notes: A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. C: Country of manufacture will be shown here. D: E: 2 is for safety ground connection. To keep the distance more than 4mm between PCB edge and customer’s chassis. ZWS-BAF Series Outline Drawing ZWS75BAF ZWS75BAF-5 INPUT 100-240VAC 50/60Hz OUTPUT 5 V 15 A 1.0 A MADE IN JAPAN Notes: A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. C: Country of manufacture will be shown here. D: is for safety ground connection. E: To keep the distance more than 4mm between PCB edge and customer’s chassis. Outline Drawing ZWS100BAF Notes: A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. C: Country of manufacture will be shown here. D: is for safety ground connection. E: To keep the distance more than 4mm between PCB edge and customer’s chassis. F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001TP0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.) Matching Housing & Terminal --- not included with the product. Outline Drawing ZWS150BAF Notes: A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. C: Country of manufacture will be shown here. D: is for safety ground connection. E: To keep the distance more than 4mm between PCB edge and customer’s chassis. F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001TP0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.) Matching Housing & Terminal --- not included with the product. ZWS-BAF Series 3 TDK-LAMBDA EMEA www.emea.tdk-lambda.com TDK-Lambda France SAS TDK-Lambda UK Ltd. Route de Grivery ZAC des Delaches CS 41077 91978 Courtaboeuf Cedex France Tel: +33 1 60 12 71 65 Fax: +33 1 60 12 71 66 [email protected] www.fr.tdk-lambda.com Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) 12 71 85 66 66 Fax: +44 (0) 12 71 86 48 94 [email protected] www.uk.tdk-lambda.com Italy Sales Office Nemic Lambda Ltd. Via dei Lavoratori 128/130 20092 Cinisello Balsamo (MI) Italy Tel: +39 02 61 29 38 63 Fax: +39 02 61 29 09 00 [email protected] www.it.tdk-lambda.com Kibbutz Givat Hashlosha 48800 Israel Tel: +9 723 902 4333 Fax: +9 723 902 4777 [email protected] www.nemic.co.il TDK-Lambda Germany GmbH Russia Karl-Bold-Strasse 40 77855 Achern Germany Tel: +49 7841 666 0 Fax: +49 7841 5000 [email protected] www.de.tdk-lambda.com Technical Support: St Petersburg Tel: +7 (812) 6580463 Sales: Moscow Tel: +7 (499) 7557732 [email protected] www.tdk-lambda.ru Austria Sales Office Aredstrasse 22 2544 Leobersdorf Austria Tel: +43 2256 655 84 Fax: +43 2256 645 12 [email protected] www.de.tdk-lambda.com LOCAL DISTRIBUTION Distribution: RSG Electronic Components GmbH ■ Sprendlinger Landstr. 115 ■ D-63069 Offenbach / Germany Tel. +49.69.984047-0 ■ Fax +49.69.984047-77 ■ [email protected] ■ www.rsg-electronic.de Änderungen vorbehalten / subject to change without notice. ZWS-BAF June11 v3 4 ZWS-BAF Series