NV-300 www.uk.tdk-lambda.com/nv Medical Industrial Test Broadcast Comms 300W Configurable power supply. Renewable Features Benefits • High Efficiency Minimises heat in system • Low Profile Fits 1U Applications • High Power Density Requires less space • Up To 5 Outputs Eliminates need for additional supplies • 3 Year Warranty Low cost of ownership Input Input Voltage 90-264Vac (below 100Vac input, derate by 3W / V) Input Frequency 45 - 63Hz (440Hz with reduced PFC - consult factory) Input Harmonics EN61000-3-2 compliant Power Factor 0.97 typical Input Fuse 6.3A Fast acting (not user accessible) Inrush Current 15A typical at 25°C and 230Vac (cold start) Earth Leakage Current 123µA at 120Vac (60Hz), 257µA max at 240Vac (60Hz) Worst case leakage current is less than 300µA at 264Vac, 63Hz (normal condition, 0.5mA Single Fault Condition) How To Create A Product Description NVA3- #o/p Ch1 Ch2 Ch3 Ch4 Global Case Option Option Number of outputs (excluding standby and fan supplies) Blank -C -U -F -I no case U chassis + cover U chassis End fan + case1 IEC input, end fan + case1 Blank no option -N3 5V/2A ATX compatible -N4 5V/2A ATX compatible Letter/number from ‘Available Outputs’ Ch1 - Ch4 table to represent output voltage 1 - Needs ‘0H’, ‘3H’, ‘5H’, ‘TH’ or ‘FH’ type channel 4. The fan speed is temperature dependent, ensuring optimum cooling and lowest audible noise Confirm availability of created product with TDK-Lambda QUICK SELECTOR - example configurations Model Ch1 Ch2 Ch3 Ch4 Ch5 Global Option NVA3-453TTH 5V / 40A 3.3V / 15A 12V / 5A -12V / 2A - No NVA3-453TTH-N3 5V / 40A 3.3V / 15A 12V / 5A -12V / 2A 5V / 2A ATX (-N3) NVA3-350TTH 5V / 40A - 12V / 5A -12V / 2A - No ATX (-N3) NVA3-350TTH-N3 5V / 40A - 12V / 5A -12V / 2A 5V / 2A NVA3-453FFH 5V / 40A 3.3V / 15A 15V / 5A -15V / 2A - No NVA3-453FFH-N3 5V / 40A 3.3V / 15A 15V / 5A -15V / 2A 5V / 2A ATX (-N3) NVA3-350FFH 5V / 40A - 15V / 5A -15V / 2A - No NVA3-350FFH-N3 5V / 40A - 15V / 5A -15V / 2A 5V / 2A ATX (-N3) NV-300 1 AVAILABLE OUTPUTS Adjustment Range5 Channel 1 5 5 - 5.5V 5V / 40A2 1 1.8V / 15A 0.9 - 2.5V 2 2.7V / 15A 2.5 - 3.8V 3 3.3V / 15A 2.5 - 3.8V 2H 2.7V / 24A 2.5 - 3.8V 3.3V / 24A 2.5 - 3.8V 3H 0 T G 12V / 25A 12 - 13V 24V / 12.5A 24 - 28V7 Adjustment Range5 Channel 21 Channel 3 T TH F FH G 0 Omit 5 5V / 10A 3.3 - 5.5V 5H 5V / 16A 3.3 - 5.5V 0 Omit 5 5V / 8A 5 - 5.5V 5H 5V / 12.5A 5 - 5.5V T 12V / 10A 12 - 15.5V F 15V / 10A 12 - 15.5V 0 Omit 1. 1, 2, 3, 2H & 3H channel 2 only available with 5V channel 1. 5V / 10A channel 2 only available with 12 or 15V channel 1. 5V / 8A channel 2 only available with 24V channel 1 2. Maximum combined output current from Ch1 + Ch2 = 40A 3. 4. 5. 6. Adjustment Range5 12V / 5A4 12V / 8A6 15V / 4A4 15V / 6.4A6 24V / 2.5A Omit 12 - 15V 12 - 15V 12 - 15V 12 - 15V 18 - 24V Follow output letters by ‘P’ for positive output channel 4. 60W max output power Max voltage at the output (includes remote sense) 96W max output power Channel 43 3H 5H TH FH 0H 0 -3.3V / 2A8 -5V / 2A8 -12V / 2A8 -15V / 2A8 Fan supply only Omit Adjustment Range Fixed Fixed Fixed Fixed 7. 24-24.5V if any channel 2 fitted 24 - 26V is 24V channel 3 fitted 8. 1.5A max if fitted with ‘-F’ option. Other output options are available, please consult TDK-Lambda with your requirements Output Specification Voltage / Current See available outputs Turn on time 1.5s max at 90Vac and 100% rated output power Efficiency up to 90% configuration dependent Hold up 16ms min at 90Vac (or 50mV if higher) pk-pk, using EIAJ test method & 20MHz bandwidth Ripple and Noise <1% Voltage Accuracy ±1% ±5% for Channel 4 Remote Sense Yes Channels 1 & 2. Max 0.5V total line drop Minimum Load No Total Regulation 1.5% Transient Response <5% Recovery on any output For channels 1, 2 and 3 (2.5% for channel 4) Including Line (for 90-264Vac input change), Load (for 0-100% load change) and Cross (for 0-100% load change on any other output) regulation of set voltage for 40% load change (in 50µs within the range 25-100% load) 500µs for recovery to 1% of set voltage See Application Notes for details Over Voltage Protection Yes Short Circuit Protection Yes Over Temperature Protection Yes Ch1 Good Signal Yes Output Power 1.5% for units with 5V channel 1 300W Provides a Logic ‘Low’ signal after Channel 1 output is within 90% (±5%) of nominal. Total output power from all outputs for Vin above 180Vac, max output power = 300W + standby supply Isolation Input to Output Reinforced Input to Earth Basic Output to Earth 2 2 x MOOPs (3rd edition 60601) 4.3kVdc 2.3kVdc 200Vdc NV-300 Global Interface Signals - units fitted with N3 or N4 options ATX Remote on/off TTL high or open circuit will inhibit all outputs (except Standby) ATX Power Good Logic high indicates ac supply is good and output 1 is within regulation Standby Supply Common 0V with power supply. Not affected by ATX remote on/off -N3 Option = 5V / 2A -N4 Option = 12V / 1A Environment Temperature 0°C to 50°C operational, -40°C to 70°C storage (max 12 months). Full load, with either ‘-F’ option fitted or 1.5m/s air blown from input to output (approximately 10CFM) Derating 50°C to 65°C derate each output by 2.5% per °C Low Temp Startup -20°C Humidity 5 - 95% RH non condensing Shock ±3 x 30g shocks in each plane, total 18 shocks 30g shock = 11ms (+/-0.5msec), half sine Conforms to EN60068-2-27, EN60068-2-47, IEC68-2-27, IEC68-2-47, JIS C0041-1987. Conforms to MIL-STD-810E/F, Method 516.5, Pro I, IV, VI Vibration Single axis 10 - 500 Hz at 2g (sweep and endurance at resonance) in all 3 planes Conforms to EN60068-2-6, IEC68-2-6 Conforms to MIL-STD-810E, Method 514.4, Pro I, Cat 1,9 Altitude 3000 metres operational Pollution Degree 2, Material group IIIb Immunity EN61000-6-2:2005, EN60601-1-2:2001 Criteria Electrostatic Discharge EN61000-4-2 Level 4 Air discharge 15kV, Contact discharge 8kV. Not applicable to open frame units Electromagnetic Field EN61000-4-3 Level 3 12V/m A A A Fast / Burst Transient EN61000-4-4 Level 4 ac input tested to 4.4kV dc output tested to 2.2kV Surge Immunity EN61000-4-5 Level 3 Common mode - 2.2kV, Differential - 1.1kV A Conducted RF Immunity EN61000-4-6 Level 3 12V A Power Frequency Magnetic Field EN61000-4-8 Level 4 30A/m A Voltage Dips, Variations, Interruptions EN61000-4-11 Class 3 Criteria B for 5 sec interruption A Voltage Fluctuations EN61000-4-14 Class 3 For 100 - 240V Nominal A Emissions EN61000-6-3:2007, EN60601-1-2:2001 Radiated Electric Field EN55011, EN55022 (as per CISPR.11/22) Class B, FCC47 part 15 subpart B Conducted Emissions EN55011, EN55022 (as per CISPR.11/22) Class B, FCC47 part 15 subpart B Conducted Harmonics EN61000-3-2 Class A Flicker EN61000-3-3 Compliant - dmax only see application note for details. Additional filtering required for IEC inlet version. Safety Approvals Notes IEC/EN 60950-1, UL60950-1 / CSA 22.2 No 60950-1 File E135494 IEC/EN 60601-1, UL/CSA 60601-1, ANSI/AAMI ES60601-1 CAN/CSA-C22.2 No 60601-1-08 File E349607 IEC/EN 61010-1 Designed to meet CE Mark (EN60950-1) LV Directive 2006/95/EC CB certificate and Report available on request Please check with technical sales for status of approvals NV-300 3 OUTLINE & CONNECTION DRAWINGS 184.00 174.00 0 4.0 5.00 J2 CH1 V ADJ HI PIN CONNECTION (or LO) T2 (+) CH2 V ADJ EARTH 2 NOT CONNECTED 3 LIVE 4 NOT CONNECTED 5 NEUTRAL 95.00 87.00 T1 (-) 1 J1 CH3 V ADJ J1 HI J2 (or LO) 4.00 PIN 1 CH4 V ADJ WITHOUT GLOBAL OPTION J3 GLOBAL OPTION ONLY PIN PIN CONNECTION CONNECTION 11 0V COMMON 1 0V COMMON 12 0V COMMON 2 0V COMMON 13 CH2 +Ve 3 CH2 +Ve 14 CH2 +Ve 4 CH2 +Ve 15 +SENSE CH1 5 -SENSE CH1 16 +SENSE CH2 6 -SENSE CH2 17 CH1 GOOD 7 N/C 18 CH3 +Ve 8 CH3 +Ve 19 0V COMMON 9 0V COMMON 20 CH4 O/P 10 CH4 O/P T1 & T2 (SEE TOP LEFT) J3 (GLOBAL OPTION ONLY) 120.00 112.00 PIN CONNECTION 1 STANDBY -Ve PIN 5 CONNECTION N/C 2 STANDBY +Ve 6 N/C 3 STANDBY -Ve 7 POWER GOOD 4 STANDBY +Ve 8 REM ON/OFF WITH GLOBAL OPTION CRIMP PIN CONNECTOR HOUSING J1 39-01-2205 44476-3112 J2 09-50-8051 08-52-0113 J3 51110-0860 T1 & T2 N/A 34.00 28.00 4.00 MATING PARTS (MOLEX OR EQUIVALENT) 20 11 1 7 1 8 2 4.00 10 50394 TAG 19073-0165 Input and output connectors are not included with the product. They are available from TDK-Lambda 1 off input connector and 3 crimps part number is 94910. 1 off output connector and 20 crimps part number is 94912. 4 NV-300 OUTLINE & CONNECTION DRAWINGS 'U' CHASSIS (COVER OPTIONAL) OPEN FRAME WITHOUT GLOBAL OPTION WITH GLOBAL OPTION FAN+IEC OPTION FAN OPTION 25.40 18.95 3.00 FAN+IEC OPTION 72.20 20.30 57.20 4.00 31.20 FAN OPTION 102.00 112.00 5.00 19.50 7.50 NARROW CASE FIXINGS STILL AVAILABLE IN WIDE CASE UNITS. 174.00 174.00 7.50 5.00 87.00 184.00 10.00 'U' CHANNEL 39.10 WITHOUT COVER 127.00 40.60 NV-300 5 TDK-LAMBDA EMEA www.emea.tdk-lambda.com TDK-Lambda France SAS TDK-Lambda UK Ltd. ZAC des Delaches CS 41077 9 rue Thuillere 91978 Villebon Courtaboeuf France Tel: +33 1 60 12 71 65 Fax: +33 1 60 12 71 66 [email protected] www.fr.tdk-lambda.com Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) 12 71 85 66 66 Fax: +44 (0) 12 71 86 48 94 [email protected] www.uk.tdk-lambda.com Italy Sales Office TDK-Lambda Ltd. Via dei Lavoratori 128/130 20092 Cinisello Balsamo (MI) Italy Tel: +39 02 61 29 38 63 Fax: +39 02 61 29 09 00 [email protected] www.it.tdk-lambda.com Kibbutz Givat Hashlosha 48800 Israel Tel: +9 723 902 4333 Fax: +9 723 902 4777 [email protected] www.tdk-lambda.co.il TDK-Lambda Germany GmbH Russia Karl-Bold-Strasse 40 77855 Achern Germany Tel: +49 7841 666 0 Fax: +49 7841 5000 [email protected] www.de.tdk-lambda.com Technical Support: St Petersburg Tel: +7 (812) 6580463 Sales: Moscow Tel: +7 (499) 7557732 [email protected] www.tdk-lambda.ru Austria Sales Office Aredstrasse 22 2544 Leobersdorf Austria Tel: +43 2256 655 84 Fax: +43 2256 645 12 [email protected] www.de.tdk-lambda.com Local Distribution Distribution: RSG Electronic Components GmbH ■ Sprendlinger Landstr. 115 ■ D-63069 Offenbach / Germany Tel. +49.69.984047-0 ■ Fax +49.69.984047-77 ■ [email protected] ■ www.rsg-electronic.de Änderungen vorbehalten / subject to change without notice. NV300 69687-REV 10-October 2012 6 NV-300