pg320240wrfhnnhs1q - Powertip Technology Corp.

TECH. CORP.
SPECIFICATIONS
CUSTOMER
:
CUS999
SAMPLE
CODE
:
PS320240WRF-HNNH42
MASS PRODUCTION CODE
:
PG320240WRFHNNHS1Q
SAMPLE VERSION
:
01
SPECIFICATIONS EDITION
:
001
DRAWING NO.
(Ver.)
:
LMD-PG320240WRFHNNHS1Q (Ver:001)
PACKAGING NO.
(Ver.)
:
PKG-PG320240WRFHNNHS1Q (Ver:001)
Customer Approved
Date:
Approved
Checked
Oliver Huang
Designer
Louis Chen
POWERTIP
2008.07.15
TW RD APR
Preliminary specification for design input
Specification for sample approval
POWERTIP TECH. CORP.
Headquarters:
No.8, 6th Road, Taichung Industrial Park,
Taichung, Taiwan
407
8
TEL: 886-4-2355-8168
E-mail: [email protected]
FAX: 886-4-2355-8166
Http://www.powertip.com.tw
NO.PT-A-005-8
History of Version
Date
(mm / dd / yyyy)
02/03/2006
07/01/2008
Ver. Edi.
0
01
Description
Page
Design by
0
Mass production.
-
Peter
001
Modify LCD.
Modify 1.4 DC Electrical Characteristics.
Modify 1.5 Optical Characteristics.
Modify 1.6 Backlight Characteristics.
Modify 3.2 Inspection Specification.
Modify 4.1 Reliability Test Condition
5
6
11
20~25
26
Louis
Total27 Page
PG320240WRFHNNHS1Q
V.001
Page2
SAMPLE Ver.01
SPEC Edi.001
Contents
1. SPECIFICATIONS
1.1
1.2
1.3
1.4
1.5
1.6
Features
Mechanical Specifications
Absolute Maximum Ratings
DC Electrical Characteristics
Optical Characteristics
Backlight Characteristics
2. MODULE STRUCTURE
2.1
2.2
2.3
2.4
Counter Drawing
Interface Pin Description
Timing Characteristics
Jumper Setting
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
3.2 Inspection Specification
4. RELIABILITY TEST
4.1 Reliability Test Condition
5. PRECAUTION RELATING PRODUCT HANDLING
5.1
5.2
5.3
5.4
Safety
Handling
Storage
Terms of Warranty
Appendix ALCM Drawing
Appendix BLCM Packaging
NoteFor detailed information please refer to IC data sheetSITRONIX---ST8016-F3
SITRONIX---ST8024-F4
PG320240WRFHNNHS1Q
V.001
Page3
SAMPLE Ver.01
SPEC Edi.001
1. SPECIFICATIONS
1.1 Features
Item
Standard Value
Display Type
320 * 240 Dots
LCD Type
FSTN , Positive Transflective
Driver Condition
LCD Module: 1/240 Duty, 1/14 Bias
Viewing Direction
6 O’clock
Backlight
White LED
Weight
65 g
Interface
4 bit parallel data input
ROHS
THIS PRODUCT CONFORMS THE ROHS OF PTC
Detail information please refer web side :
http://www.powertip.com.tw/news/LatestNews.asp
Driver IC
SITRONIX ST8016-F3, ST8024-F4
1.2 Mechanical Specifications
Item
Standard Value
Unit
Outline Dimension
92.0 (L) * 71.3 (w) * 9.0 (H)(Max)
mm
Viewing Area
78.78 (L) * 59.58 (w)
mm
Active Area
76.78 (L) * 57.58 (w)
mm
Dot Size
0.22 (L) * 0.22 (w)
mm
Dot Pitch
0.24 (L) * 0.24 (w)
mm
NoteFor detailed information please refer to LCM drawing
1.3
Absolute Maximum Ratings
Item
Symbol
Condition
Min.
Max.
Unit
Power Supply Voltage
VDD
-0.3
7.0
V
LCD Driver Supply Voltage
VLCD-VSS
-0.3
+25
V
Input Voltage
VIN
-0.3
VDD+0.3
V
Operating Temperature
TOP
-20
70
°C
Storage Temperature.
TST
-30
80
°C
Storage Humidity
HD
Ta40 20
90
%RH
PG320240WRFHNNHS1Q
V.001
Page4
SAMPLE Ver.01
SPEC Edi.001
1.4 DC Electrical Characteristics
VDD = 4.5~5.5VVSS = 0VTa = 25°C
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
Logic Supply
Voltage
VDD
4.5
5.0
5.5
V
“H” Input Voltage
VIH
0.8 VDD
-
-
V
“L” Input Voltage
VIL
-
-
0.2 VDD
V
“H” Output Voltage
VOH
VDD -0.4
-
-
V
“L” Output Voltage
VOL
-
-
0.4
V
VDD =5.0V , Vop =20.8V
Pattern= Full display
-
10
-
mA
VDD =5.0V , Vop =20.8V
Pattern= Horizontal line*1
-
30
45
mA
-20°C
20.6
20.8
21.0
25°C
20.6
20.8
21.0
70°C
19.6
19.8
20.0
Supply current
IDD
LCM driving voltage
VOP
*2
V
Test :Need to make sure that there is no flicker and ripper phenomenon when setting the frame
frequency in your set.
NOTE: *1 The Maximum current display;
*2 The VOP test point is VOUT-GND.
PG320240WRFHNNHS1Q
V.001
Page5
SAMPLE Ver.01
SPEC Edi.001
1.5 Optical Characteristics
LCD Panel: 1/240 Duty, 1/14 Bias, VLCD = 20.8 V, Ta = 25°C
Item
Symbol
Min.
Typ.
Max.
Unit
Reference
ms
Note2
Deg.
Note 1
Rise
tr
-
150
225
Fall
tf
-
290
435
Top
Y+
C>2.0,
-
45
Bottom
Y-
∅ =270°,
-
40
-
Left
X-
-
45
-
Right
X+
-
45
-
-
5
-
-
Note 3
20
-
cd/m2
-
0.25
0.31
0.37
-
Note 4
%
-
Response Time
Viewing angle
range
Conditions
Contrast Ratio
CR
Average Brightness
(with B/L) *2
IV
= 0°,
∅ =270°,
15
IF =120mA
X
CIE Color Coprdinate
(with B/L) *2
Y
0.29
0.35
0.41
Uniformity *1
B
70
-
-
Note 4:
1B=B(min) / B(max)*100%
2Measurement Condition for Optical Characteristics:
aEnvironment: 25±5 / 6020%R.Hno winddark room below 10 Lux at typical lamp
current and typical operating frequency.
bMeasurement Distance: 500 ± 50 ( = 0°)
cEquipment: TOPCON BM-7 fast(field 1)after 10 minutes operation.
dThe uncertainty of the C.I.E coordinate measurement ±0.01Average Brightness ± 4%
1
2
3
VIEW AREA
6
5
4
7
8
9
500 LCM
Colorimeter=BM-7 fast
PG320240WRFHNNHS1Q
V.001
Page6
SAMPLE Ver.01
SPEC Edi.001
Note 1.
Optical characteristics-2
Viewing angle
Top (
Left (9H)
=180
Rear (12H)
=0 )
L
-
=90
R
+
Right (3H)
=0
Front (6H)
=270
Viewing angle
PG320240WRFHNNHS1Q
V.001
Page7
SAMPLE Ver.01
SPEC Edi.001
Note 2.
Optical characteristics-3
Fig.2 Definition of response time
Positive Type
No selected waveform
Selected waveform
No selected waveform
Transmittance
10%
90%
100%
%
Tf
Tr
Negative Type
No selected waveform
No selected
waveform
Selected waveform
Transmittance
100%
90%
10%
Tr
PG320240WRFHNNHS1Q
V.001
Tf
Page8
SAMPLE Ver.01
SPEC Edi.001
Electrical characteristics-2
2 Drive waveform
Vop: Drive voltage
1/B: Bias
N: Duty
fF: Frame frequency
!"#%$ '& (*)
(1) Selected waveform
1
2
V
o
3
1
N
3
2
Vop/B
Vop/B
V
o
1/fD
1/fF
(2) Non- Selected wave form
1
2
(1-2/B)Vop
3
N
1
2
3
Vop/B
Vop/B
(1-2/B)Vop
1/fF
1/fD
Note:
Frame frequency is defined as follows: Common side supply voltage peak
- to - peak /2 = 1 period
PG320240WRFHNNHS1Q
V.001
Page9
SAMPLE Ver.01
SPEC Edi.001
Note 3. : Definition of Vth
Selected waveform
100
%
73%
Transmittance
No selected waveform
50%
Vth1
Vth2
Drive
Active voltage range
Vth1
10
(Selected waveform)
50%
,
View direction
Drive waveform
Transmittance
+
Vth2
40
(No selected waveform)
73%
,
1 Contrast ratio
= (Brightness in OFF state) / (Brightness in ON state)
Outline of Electro-Optical Characteristics Measuring System
-
Photo Detector
Human
Eye
Active
.
Temperature
Control Chamber
LCD Panel
Transmissive
Measuring System: Autronic DMS-803
PG320240WRFHNNHS1Q
V.001
Page10
SAMPLE Ver.01
SPEC Edi.001
1.6 Backlight Characteristics
LCD Module with LED Backlight
Maximum Ratings
Item
Symbol
Conditions
Min.
Max.
Unit
Forward Current
IF
Ta =25
-
150
mA
Reverse Voltage
VR
Ta =25
-
1
V
Power Dissipation
Pd
Ta =25
-
0.45
W
Electrical / Optical Characteristics
Ta =25
Item
Symbol
Conditions
Min.
Typ.
Max.
Unit
Forward Voltage
VF
IF =120mA
-
3.7
4.0
V
Reverse Current
IR
VR = 0.8V
-
30
-
mA
Average Brightness
(without LCD)
IV
280
360
-
cd/m2
Uniformity
(Without LCD) *1
B
70
-
-
%
X
0.287
0.300
0.330
Y
0.276
0.310
0.339
CIE Color Coordinate
(Without LCD)
IF =120mA
Color
-
White
*1 B=B(min) / B(max) *100%
Internal Circuit Diagram:
R
A(+)
DIODE
R
PG320240WRFHNNHS1Q
V.001
Page11
K(-)
SAMPLE Ver.01
SPEC Edi.001
2. MODULE STRUCTURE
2.1 Counter Drawing
2.1.1
LCM Mechanical Diagram
* See Appendix
2.1.2
Block Diagram
PG320240WRFHNNHS1Q
V.001
Page12
SAMPLE Ver.01
SPEC Edi.001
2.2 Interface Pin Description
PIN
Symbol
DESCRIPTION
1
FLM
2
M
3
CL1
Shift clock pulse input pin.
4
CL2
Clock input pin for taking display data
5
/D-OFF
6
DB0
Display data input pin
7
DB1
Display data input pin
8
DB2
Display data input pin
9
DB3
Display data input pin
10
VDD
Logic system power supply pin
11
VSS
Ground pin
12
ADJ1
13
VSS
Ground pin
14
NC
Must be open.
15
A
Power supply for LED B/L.Anode
16
K
Power supply for LED B/L.Cathode
Indicates the beginning of each display cycle.
AC signal input for LC driving waveform
Control input pin for output deselect level, active “L”
LCD Operator Voltage
Note : FLM Recommended 55Hz ~ 75Hz
M Recommended 200Hz ~ 400Hz
Contrast Adjust
PG320240WRFHNNHS1Q
V.001
Page13
SAMPLE Ver.01
SPEC Edi.001
2.3 Timing Characteristics
tWLPH
CL1(LP)
tLD
tSL
tLH
tLS
tWCKH
tWCKL
CL2(XCK)
tR
tF
tWCK
DB3 - DB0
tDS
LAST DATA
tDH
TOP DATA
tWDL
tSD
/DISPOFF
Vss=0V, VDD=4.5V to 5.5V, Ta=25°C
Parameter
Symbol
Condition
Min
Shift clock period
tWCK
tR, tF = 10ns
50
ns
Shift clock “H” pulse width
tWCKH
15
Shift clock “L” pulse width
Data setup time
Data hold time
Latch pulse “H” pulse width
tWCKL
tDS
tDH
tWLPH
15
10
12
15
Shift clock rise to latch pulse rise time
Shift clock fall to latch pulse fall time
Latch pulse rise to shift clock rise time
Latch pulse fall to shift clock fall time
tLD
tSL
tLS
tLH
0
30
25
25
ns
ns
ns
ns
ns
ns
ns
ns
ns
Latch pulse fall to shift clock rise time
tLSW
50
ns
Enable setup time
tS
10
ns
Input signal rise time
tR
PG320240WRFHNNHS1Q
V.001
TYP
Max
50
Page14
Unit
ns
SAMPLE Ver.01
SPEC Edi.001
Parameter
Symbol
Input signal fall time
tF
/DISPOFF removal time
tSD
Condition
Min
TYP
100
/DISPOFF “L” pulse width
tWDL
1.2
NOTES :
1. Takes the cascade connection into consideration.
2. (tWCK - tWCKH - tWCKL) / 2 is maximum in the case of high speed operation.
PG320240WRFHNNHS1Q
V.001
Page15
Max
Unit
50
ns
ns
ns
SAMPLE Ver.01
SPEC Edi.001
4 Bits Panel Timing
VDP
VNDP
FLM
CL1
M
DB3 ~ DB0
LINE 1
LINE 2
LINE 3
LINE 239 LINE 240
LINE 1
LINE 2
CL1
M
HDP
HNDP
CL2
DB3 ~ DB0
PG320240WRFHNNHS1Q
V.001
1-1
1-5
1-3 17
1-2
1-6
1-3 18
1-3
1-7
1-3 19
1-4
1-8
1-3 20
Page16
SAMPLE Ver.01
SPEC Edi.001
Timming of power supply for graphic modules
2.4 Jumper Setting
Short:JF
PG320240WRFHNNHS1Q
V.001
Page17
SAMPLE Ver.01
SPEC Edi.001
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
Item
Customer
Sales
Info
Marketing
&
Design
R&D
Manufactu Product
Inventory
Purchase
ring
control
control
Q.A
Survey
Request
Project
Inquiry
evaluation
Project Validation
NG
OK
Quote
Contract
Design check
Sample test
Sample
Approval
NG
Verification
NG
OK
Sample approval
OK
Pilot
Pilot
Run
&
Mass
Product
NG
Verification
OK
Specification preparation
Mass production
OK
Ship
Out
PG320240WRFHNNHS1Q
run & Reliability test
Inspection
NG
Shipment
Ship out
V.001
Page18
SAMPLE Ver.01
SPEC Edi.001
Item
Customer
Sales
Info
Claim
R&D
Manufact Product
Inventory
Purchase
uring
control
control
Q.A
Failure analysis
Sales
Service
Analysis report
Corrective action
Tracking
1. ISO 9001 Maintenance Activities
Q.A
3. Equipment calibration
Activity 5. Standardization Management
PG320240WRFHNNHS1Q
V.001
2. Process improvement proposal
4. Education And Training Activities
Page19
SAMPLE Ver.01
SPEC Edi.001
3.2 Inspection Specification
PG320240WRFHNNHS1Q
V.001
Page20
SAMPLE Ver.01
SPEC Edi.001
PG320240WRFHNNHS1Q
V.001
Page21
SAMPLE Ver.01
SPEC Edi.001
PG320240WRFHNNHS1Q
V.001
Page22
SAMPLE Ver.01
SPEC Edi.001
PG320240WRFHNNHS1Q
V.001
Page23
SAMPLE Ver.01
SPEC Edi.001
PG320240WRFHNNHS1Q
V.001
Page24
SAMPLE Ver.01
SPEC Edi.001
PG320240WRFHNNHS1Q
V.001
Page25
SAMPLE Ver.01
SPEC Edi.001
4. RELIABILITY TEST
4.1 Reliability Test Condition
NO.
(VER.02)
TEST ITEM
TEST CONDITION
High Temperature
Storage Test
Keep in hrs
Surrounding temperature, then storage at normal condition hrs.
Low Temperature
Storage Test
Keep in hrs
Surrounding temperature, then storage at normal condition hrs.
High Temperature /
High Humidity
Storage Test
/ % R.H duration for hrs
Keep in Surrounding temperature, then storage at normal condition hrs.
(Excluding the polarizer)
Air Discharge:
Apply KV with times
Discharge for each polarity +/
ESD Test
Contact Discharge:
Apply V with times
discharge for each polarity +/-
1. Temperature ambiance : 2. Humidity relative : %%
3. Energy Storage Capacitance(Cs+Cd) : pF%
4. Discharge Resistance(Rd) : %
5. Discharge, mode of operation :
Single Discharge (time between successive discharges at least
1 sec)
(Tolerance if the output voltage indication : %)
Temperature Cycling
Storage Test
Vibration Test
(Packaged)
(mins) (mins) (mins) (mins)
Cycle
Surrounding temperature, then storage at normal condition hrs.
1. Sine wave Hz frequency ( min)
2. The amplitude of vibration : mm
3. Each direction (XYZ) duration for Hrs
Packing Weight
(Kg)
Drop Test
(Packaged)
Drop Height (cm)
Drop direction :1 corner / edges / sides each times
PG320240WRFHNNHS1Q
V.001
Page26
SAMPLE Ver.01
SPEC Edi.001
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1
5.1.2
If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
5.2.9
Avoid any strong mechanical shock which can break the glass.
Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using.
Do not remove the panel or frame from the module.
The polarizing plate of the display is very fragile. So , please handle it very carefully,
do not touch , push or rub the exposed polarizing with anything harder than an HB
pencil lead (glass , tweezers , etc.)
Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface
of plate.
Do not touch the display area with bare hands , this will stain the display area.
Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a
cleaning naphtha solvent.
To control temperature and time of soldering is 280 ± 10°C and 3-5 sec.
To avoid liquid (include organic solvent) stained on LCM
5.3 STORAGE
5.3.1
5.3.2
5.3.3
Store the panel or module in a dark place where the temperature is 25°C ± 5°C
and the humidity is below 65% RH.
Do not place the module near organics solvents or corrosive gases.
Do not crush , shake , or jolt the module.
5.4 TERMS OF WARRANTY
5.4.1
5.4.2
Applicable warrant period
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for use
in your company’s general electronic products. It is guaranteed to perform according
to delivery specifications. For any other use apart from general electronic equipment,
we cannot take responsibility if the product is used in nuclear power control equipment,
aerospace equipment , fire and security systems or any other applications in which there
is a direct risk to human life and where extremely high levels of reliability are required.
and where extremely high levels of reliability are required.
PG320240WRFHNNHS1Q
V.001
Page27
SAMPLE Ver.01
SPEC Edi.001