TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH480272T006-IBB MASS PRODUCTION CODE : PH480272T006-IBB SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 002 DRAWING NO. (Ver.) : JLMD- PH480272T006-IBB_002 PACKAGING NO. (Ver.) : JPKG- PH480272T006-IBB_001 Customer Approved POWERTIP 2013.09.30 Date: JS RD APPROVED Approved Checked Designer 閆偉 Ryan 劉進 Lori 李誠 Bruce □ Preliminary specification for design input ■ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 07/16/2012 01 001 New Drawing. - 李誠 09/17/2013 01 002 New Sample - 李誠 Total: 32Page SH480272T006-IBB Page2 SAMPLE Ver.01 SPEC Edi.002 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics Touch Panel Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 2.4 Data Format 2.5 Power On/Off Sequence 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：LCM Drawing Packaging SH480272T006-IBB Page3 SAMPLE Ver.01 SPEC Edi.002 1. SPECIFICATIONS 1.1 Features 1.2 Item Standard Value Display Type 480 * 3 (RGB) * 272 Dots LCD Type a-Si TFT , Normally white, Transmissive type Screen size(inch) 4.3 inch Viewing Direction 6 O’clock Color configuration RGB-Strip Backlight Type LED B/L Interface Digital 24-bits RGB Other(controller/driver IC) OTA5180A (Or Compatible IC ) ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web site : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ Mechanical Specifications Item Standard Value Unit Outline Dimension 105.5(W) x 67.2 (L) x 4.7(H) mm Item Standard Value Unit Active Area 95.04 (W) x 53.856 (L) mm Item Standard Value Unit Viewing Area 99.5 (W) * 58.0 (L) mm Active Area 97.0 (W) * 55.8 (L) mm LCD panel Touch panel Note : For detailed information please refer to LCM drawing SH480272T006-IBB Page4 SAMPLE Ver.01 SPEC Edi.002 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit System Power Supply Voltage VDDIO GND=0 -0.3 4.5 V Operating Temperature TOP - -20 70 °C Storage Temperature TST - -30 80 °C Storage Humidity HD Ta < 60 °C 10 90 %RH 1.4 DC Electrical Characteristics GND = 0V, Ta = 25°C Module Item Symbol Condition Min. Typ. Max. Unit VDDIO - 3.0 3.3 3.6 V VGH - 13 15 16 V VGL - -10 -10 -7 V VIH - 0.7VDDIO - VDDIO V VIL - 0 - 0.3VDDIO V Output H/L Level Voltage VOH - VDDIO-0.4 - VDDIO V VOL - 0 - GND+0.4 V Supply Current IDD - 13.5 20 mA Power Supply Voltage Input H/L Level Voltage VDDIO = 3.3 V Pattern=Black *1 Note1:Maximum current display SH480272T006-IBB Page5 SAMPLE Ver.01 SPEC Edi.002 1.5 Optical Characteristics VDDIO= 3.3 V, Ta=25°C TFT LCD Module Item Response time Viewing angle Symbol Condition Min. Typ. Max. unit - Tr+Tf 25℃ - - 30 45 ms Note2 Rear Θ+ - 60 - Front Θ- - 60 - Left ΘL - 60 - Deg. Note 1 Right ΘR CR X 500 0.26 60 600 0.31 0.36 - Note 3 Y 0.30 0.35 0.40 X 0.55 0.60 0.70 0.29 0.34 0.39 X 0.29 0.34 0.39 - Note 4 Y 0.57 0.62 0.67 X 0.11 0.16 0.21 Y 0.08 0.13 0.18 Contrast ratio White Red Color of CIE Coordinate （With B/L&T/P） Green Y Blue CR ≥ 10 Θ= 0° Average Brightness Pattern=white display (With LCD&T/P) IV IF= 20 mA 400 500 - Uniformity (With LCD&T/P) △B IF= 20 mA 80 - - cd/m2 Note 4 Note 4 % Note 4 : 1：△B=B(min) / B(max) * 100% 2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast SH480272T006-IBB Page6 SAMPLE Ver.01 SPEC Edi.002 Note 1. Optical characteristics-2 Viewing angle Rear (12H) Top (θ=0°) θL φ=90° θR θ+ θ- Left (9H) φ=180° Right (3H) φ=0° Front (6H) φ=270° Viewing angle SH480272T006-IBB Page7 SAMPLE Ver.01 SPEC Edi.002 Note 2. Optical characteristics-3 Fig.2 Definition of response time Positive Type No selected waveform No selected waveform Selected waveform Transmittance 10% 90% 100% Tf Tr Negative Type No selected waveform No selected Selected waveform Transmittance 100% 90% 10% Tr SH480272T006-IBB Tf Page8 SAMPLE Ver.01 SPEC Edi.002 Electrical characteristics-2 ※2 Drive waveform Vop: Drive voltage 1/B: Bias N: Duty fF: Frame frequency fD: Drive frequency (1) Selected waveform 1 2 3 N 1 3 2 V Vop/B Vop/B V 1/fD 1/fF (2) Non- Selected wave form 1 2 3 N 1 2 3 (1-2/B)Vop Vop/B Vop/ (1-2/B)Vop 1/fF 1/fD Note: Frame frequency is defined as follows: Common side supply voltage peak - to - peak /2 = 1 period SH480272T006-IBB Page9 SAMPLE Ver.01 SPEC Edi.002 Note 3. : Definition of Vth Selected waveform 100 73% Transmittance No selected waveform 50% Vth1 Vth2 Drive Active voltage range View direction Drive waveform Transmittance Vth1 10° (Selected waveform) 50% Vth2 40 ° (No selected waveform) 73% ※1 Contrast ratio = (Brightness in OFF state) / (Brightness in ON state) Outline of Electro-Optical Characteristics Measuring System Photo Detector θ Human Active Temperatur e Control Chamber ψ LCD Panel Transmissive Measuring System: Autronic DMS-803 SH480272T006-IBB Page10 SAMPLE Ver.01 SPEC Edi.002 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit LED Forward Current IF Ta =25℃ - 30 mA LED Reverse Voltage VR Ta =25℃ - 1.0 V Power Dissipation PD Ta =25℃ - 735 mW Electrical / Optical Characteristics Item Symbol Forward Voltage Average Brightness (Without LCD &T/P) CIE Color Coordinate (Without LCD &T/P) Conditions Min. Typ. Max. Unit VF 18.2 22.8 24.5 V IV 5500 6000 - cd/m2 X 0.26 0.30 0.33 Y 0.26 0.30 0.33 IF= 20mA Color - White Circuit diagram： SH480272T006-IBB Page11 SAMPLE Ver.01 SPEC Edi.002 1.7 Touch Panel Characteristics 1.7.1 Touch Panel General Standard Specification Item Specification Input Method Finger or stylus pen ITO Glass T=0.7mm ITO Film T=0.188mm QQQQQ Q Storage Temperature Range -30℃~80℃，10~90%RH(Except for dew gathering.) Surface Hardness Insulation Impedance 3H-pressure 500gf,45deg DC25V ,20MΩ↑ Light Transparency 80%min. Operating Force 100gf less input with stylus pen (R0.8mm) or input Whit Finger (R8.0mm) Comply with linearity spec. Chattering <10ms SH480272T006-IBB Page12 SAMPLE Ver.01 SPEC Edi.002 1.7.2 Touch Panel Electrical Characteristics (A) Insulation Resistance. 20 MΩ or more (DC 25Ⅴ) (B) Resistance Between Terminals. Direction X (Film side): 260Ω~1240Ω Direction Y (Glass side): 160Ω~640Ω (C) Operating Voltage. 5V DC. Max Voltage: 7V DC (D) Chattering <10ms SH480272T006-IBB Page13 SAMPLE Ver.01 SPEC Edi.002 1.7.3 Touch Panel Design/Handing Guide (1) Keep the gap, for example 0.3 to 0.7mm, between bezel edge and T/P surface. The reason is to avoid the bezel edge from contacting T/P surface that may cause “short” with bottom layer (2) Insertion a cushion material is recommended. (3) The cushion material should be limited on the busbar insulation paste area. If it is over the transparent insulation paste area, a “short” may be occurred. (4) Do not to use an adhesive tape to bond it on the front of T/P and hang it to the housing bezel. (5) Never expand the T/P top layer (PET Film) like a balloon by internal air pressure. The life of the T/P will extremely decreasing. (6) Top layer, PET, dimension is changing base on environment temperature and humidity. Please avoid a stress from housing bezel to top layer, because it may cause “waving”. (7) The input to the Touch Panel sometimes distorts touch panel itself. (8)To use the stylus pen or fingernail sliding at the edge of the housing is prohibited. It would cause the cracking of the ITO coating and damage the touch panel. It also request not to press this area while assembling (9) Purpose: In order to prevent accidental use and performance deterioration, please keep the following precautions. In order to prevent unusual performance degradation and malfunction of a touch panel, please carry out the set case designing and a touch panel assembling method after surely considering the definition of each area illustrated in above figure. SH480272T006-IBB Page14 SAMPLE Ver.01 SPEC Edi.002 Area(a)：Active area The active area is guaranteed the position data detectable precision, operation force and other operations. it is strongly recommended to place the operation button or menu keys within the active area. Due to structure, the active area is less durable at the edge or close to the edge. Area(b)：Operation non-guaranteed area This area does not guarantee a touch panel operation and its function. When this area is pressed, touch panel shows degradation of its performance and durability such as a pen sliding durability becomes about one-tenth compared with the active area (area-(a) as guaranteed area) and its operation force requires about double. About 0.5 mm outside from a boundary of the active area corresponds to this area. Area(c)：Pressing prohibition area The area which forbids pressing, because an excessive load is applied to a transparent electrode (ITO) and a serious damage is given to a touch panel function by pressing. Area(d)：Non-Active area The area does not activate even if pressed. SH480272T006-IBB Page15 SAMPLE Ver.01 SPEC Edi.002 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram SH480272T006-IBB Page16 SAMPLE Ver.01 SPEC Edi.002 2.2 Interface Pin Description Pin No. Symbol 1 K Power supply for LED Backlight cathode input 2 A Power supply for LED Backlight anode input 3 NC 4 VDDIO Digital power 5 R0 Red data bit 0 6 R1 Red data bit 1 7 R2 Red data bit 2 8 R3 Red data bit 3 9 R4 Red data bit 4 10 R5 Red data bit 5 11 R6 Red data bit 6 12 R7 Red data bit 7 13 G0 Green data bit 0 14 G1 Green data bit 1 15 G2 Green data bit 2 16 G3 Green data bit 3 17 G4 Green data bit 4 18 G5 Green data bit 5 19 G6 Green data bit 6 20 G7 Green data bit 7 SH480272T006-IBB Function No connection Page17 SAMPLE Ver.01 SPEC Edi.002 Pin No. Symbol 21 B0 Blue data bit 0 22 B1 Blue data bit 1 23 B2 Blue data bit 2 24 B3 Blue data bit 3 25 B4 Blue data bit 4 26 B5 Blue data bit 5 27 B6 Blue data bit 6 28 B7 Blue data bit 7 29 GND Ground 30 CLK Dot data clock 31 RESETB Active low global reset signal input. 32 HSYNC Horizontal sync input 33 VSYNC Vertical sync input 34 NC No connection 35 NC No connection 36 GND 37 XR Right side of touch panel. 38 YD Bottom side of touch panel. 39 XL Left side of touch panel. 40 YU Up side of touch panel. SH480272T006-IBB Function Ground Page18 SAMPLE Ver.01 SPEC Edi.002 2.3 Timing Characteristics 2.3.1 AC Characteristics VDDIO=3.3V，TA=-20~70℃ 2.3.2 AC Timing Diagram Clock and Data Input Timing Diagram SH480272T006-IBB Page19 SAMPLE Ver.01 SPEC Edi.002 2.4 Data Format 2.4.1 Parallel RGB Input Timing Diagram 2.4.2 Parallel RGB Input Timing Table SH480272T006-IBB Page20 SAMPLE Ver.01 SPEC Edi.002 2.5 Power On/Off Sequence 2.5.1 Power On Sequence 2.5.2 Power Off Sequence SH480272T006-IBB Page21 SAMPLE Ver.01 SPEC Edi.002 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project evaluation Inquiry Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot run & Reliability test Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out SH480272T006-IBB Inspection NG Shipment Ship out Page22 SAMPLE Ver.01 SPEC Edi.002 Item Customer Sales Info Claim R&D Manufact Product Inventory Purchase uring control control Q.A Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management SH480272T006-IBB 2. Process improvement proposal 4. Education And Training Activities Page23 SAMPLE Ver.01 SPEC Edi.002 3.2 Inspection Specification SH480272T006-IBB Page24 SAMPLE Ver.01 SPEC Edi.002 SH480272T006-IBB Page25 SAMPLE Ver.01 SPEC Edi.002 SH480272T006-IBB Page26 SAMPLE Ver.01 SPEC Edi.002 SH480272T006-IBB Page27 SAMPLE Ver.01 SPEC Edi.002 SH480272T006-IBB Page28 SAMPLE Ver.01 SPEC Edi.002 SH480272T006-IBB Page29 SAMPLE Ver.01 SPEC Edi.002 SH480272T006-IBB Page30 SAMPLE Ver.01 SPEC Edi.002 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) (Ver.B01) TEST CONDITION Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ → +25℃ → +80℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃～35℃ 2. Humidity relative : 30%～60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10～55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time SH480272T006-IBB Page31 SAMPLE Ver.01 SPEC Edi.002 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. SH480272T006-IBB Page32 SAMPLE Ver.01 SPEC Edi.002