TECH. CORP. SPECIFICATIONS CUSTOMER : CDE016 SAMPLE CODE : S05D00024-01 MASS PRODUCTION CODE : P05D00024-01 SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 001 DRAWING NO. (Ver.) : LMD- P05D00024-01 (Ver.001) PACKAGING NO. (Ver.) : Customer Approved Date: Approved Checked Designer 林裘中 Daniel Lin 張慶源 Yuan Chang 廖志豪 Rex Liao POWERTIP 2013.07.09 TW RD APR ■ Preliminary specification for design input □ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) 07/08/2013 Ver. Edi. - 001 Description Page Design by Preliminary - Rex Total:15Page P05D00024-01 Page2 Ver.01 SPEC Edi.001 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix:Drawing P05D00024-01 Page3 Ver.01 SPEC Edi.001 1. SPECIFICATIONS 1.1 Features Hardware CPU Memory Display RISC Processor ARM926EJ-S S3C2416 (400MHz) On Board RAM 64MB DDR2 SDRAM On Board ROM 128MB NAND Flash External Storage 1x Micro SD Size 7” a-Si TFT Resolution 800 RGB x 480 Touch Panel Capacitance type USB 1x USB2.0 Device 1x USB1.1 Host COM Port 3x RS232 RTC Supported Alarm Buzzer Interface IEEE 802.3af Embedded PoE (Option) Ethernet Power Input DC 7~18V Software OS Embedded Development Software tool WINCE 6.0 R3 Visual Studio 2005/Silverlight . P05D00024-01 Page4 Ver.01 SPEC Edi.001 . 1.2 1.3 Mechanical Specifications Item Standard Value Unit Outline Dimension 192.96(W) x 108.76(L) x 26.0(H) MAX mm Viewing Area (Lens) 154.88 (L)*86.72 (W) mm Active Area (TFT LCD) 154.08 (L)*85.92 (W) mm Absolute Maximum Ratings Ta = 25℃ 1.4 Item Symbol Condition Min. Max. Unit Power Supply VDD — -0.3 24.0 V Input Voltage Vl — -0.3 VDD+0.3 V Operating Temperature TOP — -10 60 °C Storage Temperature TST — -20 70 °C Humidity HD Ta=60 ℃ 10 90 %RH DC Electrical Characteristics Ta = 25℃ Item Symbol Condition Min. Typ. Max. Unit Power Supply Voltage Input for System VIN Note 1 7 9 18 V Power Consumption of System PVIN - TBD - - W Note 1: VIN is to connect to ‘J1’ connector at board. P05D00024-01 Page5 Ver.01 SPEC Edi.001 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram POWER Unit 1 x USB 2.0 Device RTC 1 x USB 1.1 Host Buzzer 3 x RS232 Ethernet Micro SD P05D00024-01 Page6 Ver.01 SPEC Edi.001 2.2 Interface Pin Description Power Supply (J1) Pin No. Symbol 1 GND Ground 2 VIN DC Power Supply Function USB 2.0 Device (J2) --- Micro USB B type Pin No. Symbol 1 VDD5V 2 D- Data – (Data M) 3 D+ Data + (Data P) 4 NC NC 5 GND P05D00024-01 Function 5V Ground Page7 Ver.01 SPEC Edi.001 Ethernet (J3) --- IEEE 802.3af Pin No. Symbol 1 RX+ Data Receive 2 RX- Data Receive 3 TX+ Data Transmit 4 DC+ Feeding Power (+) (Option) 5 DC+ Feeding Power (+) (Option) 6 TX- Data Transmit 7 DC- Feeding Power (-)(Option) 8 DC- Feeding Power (-)(Option) Function USB 1.1 Host (J4) --- USB Port A type Pin No. Symbol 1 UDD5V 2 D- Data – (Data M) 3 D+ Data + (Data P) 4 GND P05D00024-01 Function 5V Ground Page8 Ver.01 SPEC Edi.001 UART1 (J6) --- DB9 Female Type (Ch.0) Pin No. Symbol 1 NC 2 RXD0 Receiver (Ch.0) 3 TXD0 Transmit (Ch.0) 4 NC 5 GND 6 NC 7 RTS0 Request To Send. (Ch.0) 8 CTS0 Clear To Send. (Ch.0) 9 NC P05D00024-01 Function Not Used. Not Used. Ground Not Used. Not Used. Page9 Ver.01 SPEC Edi.001 UART2 (J7) --- DB9 Female Type (Ch.2) Pin No. Symbol 1 NC 2 RXD2 Receiver (Ch.2) 3 TXD2 Transmit (Ch.2) 4 NC 5 GND 6 NC Not Used. 7 NC Not Used. 8 NC Not Used. 9 NC Not Used. UART3 Function Not Used. Not Used. Ground (J8) --- DB9 Female Type (Ch.3) Pin No. Symbol 1 NC 2 RXD3 Receiver (Ch.3) 3 TXD3 Transmit (Ch.3) 4 NC P05D00024-01 Function Not Used. Not Used. Page10 Ver.01 SPEC Edi.001 5 GND 6 NC Not Used. 7 NC Not Used. 8 NC Not Used. 9 NC Not Used. P05D00024-01 Ground Page11 Ver.01 SPEC Edi.001 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out P05D00024-01 run & Reliability test Inspection NG Shipment Ship out Page12 Ver.01 SPEC Edi.001 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management P05D00024-01 Page13 2. Process improvement proposal 4. Education And Training Activities Ver.01 SPEC Edi.001 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM TEST CONDITION 1 High Temperature Storage Test Keep in +70 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 2 Low Temperature Storage Test Keep in -20 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -20℃ → 4 Temperature Cycling Storage Test +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: TBD Discharge for each polarity +/- 5 6 ESD Test Vibration Test (Packaged) Contact Discharge: TBD discharge for each polarity +/- 1. Temperature ambiance : 15℃∼35℃ 2. Humidity relative : 30%∼60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10∼55 Hz frequency (1 min) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 7 → +70℃ → +25℃ Drop Test (Packaged) Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop direction :※1 corner / 3 edges / 6 sides each 1times P05D00024-01 Page14 Ver.01 SPEC Edi.001 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. P05D00024-01 Page15 Ver.01 SPEC Edi.001