PH800480T013-IBA

TECH. CORP.
SPECIFICATIONS
CUSTOMER
:
PTC
SAMPLE
CODE
:
SH800480T013-IBA
MASS PRODUCTION CODE
:
PH800480T013-IBA
SAMPLE VERSION
:
01
SPECIFICATIONS EDITION
:
003
DRAWING NO.
(Ver.)
:
LMD-PH800480T013-IBA (Ver.002)
PACKAGING NO.
(Ver.)
:
PKG-PH800480T013-IBA (Ver.001)
Customer Approved
Date:
Approved
Checked
Designer
Oliver Huang
李
Lambert Lee
Ackey Huang
Preliminary specification for design input
Specification for sample approval
POWERTIP TECH. CORP.
Headquarters:
th
No.8, 6 Road, Taichung Industrial Park,
TEL: 886-4-2355-8168
E-mail: [email protected]
FAX: 886-4-2355-8166
Http://www.powertip.com.tw
Taichung, Taiwan
407
六路 8
NO.PT-A-005-8
History of Version
Date
(mm / dd / yyyy)
Ver. Edi.
Description
Page
Design by
07/16/2013
01
001
New Drawing.
Ackey
09/10/2013
01
002
New Sample.
Ackey
09/18/2013
01
003
Update Data.
Ackey
Total: 26 Page
PH800480T013-IBA
Page2
SAMPLE Ver.01
SPEC Edi.003
Contents
1. SPECIFICATIONS
1.1
1.2
1.3
1.4
1.5
1.6
Features
Mechanical Specifications
Absolute Maximum Ratings
DC Electrical Characteristics
Optical Characteristics
Backlight Characteristics
2. MODULE STRUCTURE
2.1
Counter Drawing
2.1.1
2.1.2
2.2
2.3
LCM Mechanical Diagram
Block Diagram
Interface Pin Description
Timing Characteristics
2.3.1 Signal AC Characteristics
2.3.2 Input Timing Setting
2.3.3 Power On/Off Characteristics
3. QUALITY ASSURANCE SYSTEM
3.1
3.2
Quality Assurance Flow Chart
Inspection Specification
4. RELIABILITY TEST
4.1
Reliability Test Condition
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 Safety
5.2 Handling
5.3 Storage
5.4 Terms of Warranty
Appendix
PH800480T013-IBA
LCM Drawing
LCM Packaging Specifications
Page3
SAMPLE Ver.01
SPEC Edi.003
1. SPECIFICATIONS
1.1 Features
1.2
Item
Standard Value
Display Type
800 * (RGB) * 480
LCD Type
a-Si TFT , Normally white , Transmissive type, Sunlight readable
Screen size(inch)
7.0 inch
Viewing Direction
6 O’clock
Backlight Type
LED B/L
Weight
150 g
Interface
RGB Interface
ROHS
THIS PRODUCT CONFORMS THE ROHS OF PTC
Detail information please refer website :
http://www.powertip.com.tw/news.php?area_id_view=1085560481/
Mechanical Specifications
Item
Standard Value
Unit
Outline Dimension
165.0 (W) * 100.0 (L) *5.8 (H)
mm
Item
Standard Value
Unit
Active Area
154.08 (W) * 85.92 (L)
mm
LCD panel
Note For detailed information please refer to LCM drawing.
PH800480T013-IBA
Page4
SAMPLE Ver.01
SPEC Edi.003
1.3
Absolute Maximum Ratings
Module
Item
Symbol
Condition
Min.
Max.
Unit
-0.3
5.0
V
6.5
13.5
V
-0.3
40
V
DVDD
AVDD
Power Supply Voltage
GND=0
VGH
VGL
AGND=0
-20
0.3
V
VGH - VGL
-
0
40
V
Operating Temperature
TOP
-
-20
60
°C
Storage Temperature
TST
-
-30
70
°C
Remark
-
The absolute maximum rating values of this product are not allowed to be exceeded
at any times. Should a module be used with any of the absolute maximum ratings exceeded, the
characteristics of the module may not be recovered, or in an extreme case, the module may be
permanently destroyed.
1.4
DC Electrical Characteristics
GND = 0V, Ta = 25°C
Module
Item
Supply Voltage
VCOM
Input signal Voltage
Supply Current
Symbol
Min.
Typ.
Max.
DVDD
3.0
3.3
3.6
VGH
15.3
16.0
16.7
VGL
-7.7
-7.0
-6.3
AVDD
10.2
10.4
10.6
VCOM
-
3.9
-
VIH
0.7DVDD
-
DVDD
VIL
0
-
0.3DVDD
-
80
-
-
80
120
IDD
Unit
Remark
V
V
V
mA
Pattern= Full display
Pattern= Black *1
Note1: Maximum current display.
PH800480T013-IBA
Page5
SAMPLE Ver.01
SPEC Edi.003
1.5
Optical Characteristics
DVDD = 3.3 V, Ta=25°C
TFT LCD Module
Item
Symbol
Condition
Min.
Typ.
Max.
Rise
Tr
-
10
20
Fall
Tf
Ta = 25°C
θX, θY = 0°
-
15
30
Top
θY+
40
50
-
Bottom
θY-
60
70
-
Left
θX-
60
70
-
Right
θX+
60
70
-
CR
400
500
-
X
0.25
0.30
0.35
Y
0.28
0.33
0.38
0.52
0.57
0.62
0.30
0.35
0.40
0.28
0.33
0.38
Y
0.55
0.60
0.65
X
0.09
0.14
0.19
Y
0.03
0.08
0.13
-
400
500
-
80
-
Response time
Viewing angle
Contrast ratio
White
Color of CIE
Coordinate
With B/L
Red
Green
Blue
Average Brightness
Pattern=white display
(With B/L )*1
Uniformity
(With B/L )*2
PH800480T013-IBA
X
Y
X
IV
B
CR ≥ 10
Ta = 25°C
θX , θY = 0°
Page6
unit
ms
Note 2
Deg.
Note 4
Note 3
-
Note1
-
cd/m2
Note1
-
%
Note1
SAMPLE Ver.01
SPEC Edi.003
Note 1:
*1
B=B(min) / B(max) * 100%
*2 Measurement Condition for Optical Characteristics:
a Environment: 25 ±5 / 60 20%R.H no wind dark room below 10 Lux at typical lamp
current and typical operating frequency.
b Measurement Distance: 500 ± 50
(θ= 0°)
c Equipment: TOPCON BM-7 fast (field 1 ) after 10 minutes operation.
d The uncertainty of the C.I.E coordinate measurement ±0.01 Average Brightness ± 4%
1
2
3
VIEW AREA
6
5
4
7
8
500
9
LCM
Colorimeter=BM-7 fast
To be measured at the center area of panel with a viewing cone of 1° by Topcon
luminance meter BM-7, after 10 minutes operation (module)
Note2: Definition of response time:
The output signals of photo detector are measured when the input signals are changed
from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of
Amplitudes.
Refer to figure as below:
Normally White
"White"
"Black"
"White"
Signal (Relative value)
100%
90%
10%
0%
Tr
PH800480T013-IBA
Tf
Page7
SAMPLE Ver.01
SPEC Edi.003
Normally Black
"Black"
"White"
"Black"
Signal (Relative value)
100%
90%
10%
0%
Tr
Tf
Note3: Definition of contrast ratio:
Contrast ratio is calculated with the following formula
Photo detector output when LCD is at “White” state
Contrast ratio (CR) =
Photo detector output when LCD is at “Black” state
Note4: Definition of viewing angle:
Refer to figure as below:
PH800480T013-IBA
Page8
SAMPLE Ver.01
SPEC Edi.003
1.6
Backlight Characteristics
Maximum Ratings
Item
Symbol
Min.
Max.
Unit
LED Forward Current
IF
35
mA
LED Reverse Voltage
VR
1.2
V
Remark
One LED
Electrical / Optical Characteristics
Item
Symbol
Min.
Typ.
Max.
Unit
Remark
LED Voltage
VL
9.0
9.9
10.5
V
Note1
LED Current
IL
-
240
-
mA
-
LED life time
-
-
30000
-
Hr
Note2
Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25 and IL =240mA.
Note 2: The “LED life time” is defined as the module brightness decrease to 50% original brightness at
Ta=25 and IL =160mA. The LED lifetime could be decreased if operating IL is lager than
160mA.
VLED+
VLED-
PH800480T013-IBA
Page9
SAMPLE Ver.01
SPEC Edi.003
2. MODULE STRUCTURE
2.1
Counter Drawing
2.1.1
LCM Mechanical Diagram
* See Appendix
2.1.2
Block Diagram
PH800480T013-IBA
Page10
SAMPLE Ver.01
SPEC Edi.003
2.2
Interface Pin Description
SYMBOL
1
VLED+
Power For LED backlight (+).
Power
2
VLED+
Power For LED backlight (+).
Power
3
VLED-
Power For LED backlight (-).
Power
4
VLED-
Power For LED backlight (-).
Power
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
GND
Vcom
DVDD
MODE
DE
VS
HS
B7
B6
B5
B4
B3
B2
B1
B0
G7
G6
G5
G4
G3
G2
G1
G0
R7
R6
R5
R4
R3
R2
R1
R0
GND
DCLK
PH800480T013-IBA
DESCRIPTION
Type:Remark
Pin NO.
Power ground.
Common voltage.
Power for Digital Circuit.
DE/SYNC mode select.
Data Input Enable.
Vertical Sync Input.
Horizontal Sync Input.
Blue Data(MSB).
Blue Data.
Blue Data.
Blue Data.
Blue Data.
Blue Data.
Blue Data.
Blue Data(LSB).
Green Data(MSB).
Green Data.
Green Data.
Green Data.
Green Data.
Green Data.
Green Data.
Green Data(LSB).
Red Data(MSB).
Red Data.
Red Data.
Red Data.
Red Data.
Red Data.
Red Data.
Red Data(LSB).
Power Ground
Sample clock
Page11
Power
I
I
I,Note 1
I
I
I
I
I
I
I
I
I
I:Note 2
I:Note 2
I
I
I
I
I
I
I:Note 2
I:Note 2
I
I
I
I
I
I
I:Note 2
I:Note 2
Power
I:Note 3
SAMPLE Ver.01
SPEC Edi.003
Pin NO.
38
39
40
41
42
43
44
45
46
47
48
49
50
SYMBOL
GND
L/R
U/D
VGH
VGL
AVDD
RESET
NC
VCOM
DITHB
GND
NC
NC
I:input
DESCRIPTION
Power Ground.
Left / right selection.
Left / right selection.
Gate On Voltage.
Gate OFF Voltage.
Power for Analog Circuit.
Global reset pin.
No connection.
Common Voltage.
Dithering Function.
Power Ground.
No connection.
No connection.
Type:Remark
Power
I:Note 4,5
I:Note 4,5
Power
Power
Power
I:Note 6
I
I:Note 7
Power
-
Note 1: DE/SYNC mode select. Normally pull high.
When select DE mode, MODE=”1”, VS and HS must pull high.
When select SYNC mode, MODE= ”0”, DE must be grounded.
Note 2: When input 18 bits RGB data, the two low bits of R,G and B data must be grounded.
Note 3: Data shall be latched at the falling edge of DCLK.
Note 4: Selection of scanning mode.
Note 5: Global reset pin. Active low to enter reset state. Suggest to connect with an RC
reset circuit for stability. Normally pull high.
Note 6: Dithering function enable control, normally pull high.
When DITHB=”1”,Disable internal dithering function.
When DITHB=”0”,Enable internal dithering function.
PH800480T013-IBA
Page12
SAMPLE Ver.01
SPEC Edi.003
2.3
Timing Characteristics
2.3.1 Signal AC Characteristics
PH800480T013-IBA
Page13
SAMPLE Ver.01
SPEC Edi.003
2.3.2 Input Timing Setting
Horizontal input timing diaqram
PH800480T013-IBA
Page14
SAMPLE Ver.01
SPEC Edi.003
Vertical input timing diaqram
PH800480T013-IBA
Page15
SAMPLE Ver.01
SPEC Edi.003
2.3.3
Power On/Off Characteristics
PH800480T013-IBA
Page16
SAMPLE Ver.01
SPEC Edi.003
3. QUALITY ASSURANCE SYSTEM
3.1
Quality Assurance Flow Chart
Item
Customer
Sales
Info
Marketing
&
Design
R&D
Manufactu Product
Inventory
Purchase
ring
control
control
Q.A
Survey
Request
Project
Inquiry
evaluation
Project Validation
NG
OK
Quote
Contract
Design check
Sample test
Sample
Approval
NG
Verification
NG
OK
Sample approval
OK
Pilot
Pilot
Run
&
Mass
Product
NG
Verification
OK
Specification preparation
Mass production
OK
Ship
Out
PH800480T013-IBA
run & Reliability test
Inspection
NG
Shipment
Ship out
Page17
SAMPLE Ver.01
SPEC Edi.003
Item
Customer
Sales
Info
Claim
R&D
Manufact Product
Inventory
Purchase
uring
control
control
Q.A
Failure analysis
Sales
Service
Analysis report
Corrective action
Tracking
1. ISO 9001 Maintenance Activities
Q.A
3. Equipment calibration
Activity 5. Standardization Management
PH800480T013-IBA
2. Process improvement proposal
4. Education And Training Activities
Page18
SAMPLE Ver.01
SPEC Edi.003
3.2. Inspection Specification
PH800480T013-IBA
Page19
SAMPLE Ver.01
SPEC Edi.003
PH800480T013-IBA
Page20
SAMPLE Ver.01
SPEC Edi.003
PH800480T013-IBA
Page21
SAMPLE Ver.01
SPEC Edi.003
PH800480T013-IBA
Page22
SAMPLE Ver.01
SPEC Edi.003
PH800480T013-IBA
Page23
SAMPLE Ver.01
SPEC Edi.003
PH800480T013-IBA
Page24
SAMPLE Ver.01
SPEC Edi.003
4. RELIABILITY TEST
4.1
NO.
(Ver.B01)
Reliability Test Condition
TEST ITEM
TEST CONDITION
High Temperature
Storage Test
Keep in
hrs
Surrounding temperature, then storage at normal condition hrs.
Low Temperature
Storage Test
Keep in
hrs
Surrounding temperature, then storage at normal condition hrs.
High Temperature /
High Humidity
Storage Test
Keep in
/ % R.H duration for
hrs
Surrounding temperature, then storage at normal condition hrs.
(Excluding the polarizer)
Temperature Cycling
Storage Test
(
mins) ( mins)
( mins) ( mins)
Cycle
Surrounding temperature, then storage at normal condition hrs.
Air Discharge:
Apply KV with times
Discharge for each polarity +/-
ESD Test
Vibration Test
(Packaged)
Contact Discharge:
Apply
V with times
discharge for each polarity +/-
1. Temperature ambiance :
2. Humidity relative : %
%
3. Energy Storage Capacitance(Cs+Cd) :
pF
%
4. Discharge Resistance(Rd) :
%
5. Discharge, mode of operation :
Single Discharge (time between successive discharges at least 1 sec)
(Tolerance if the output voltage indication :
%)
1. Sine wave
Hz frequency ( min)
2. The amplitude of vibration :
mm
3. Each direction (X Y Z) duration for
Packing Weight
(Kg)
Hrs
Drop Height (cm)
Drop Test
(Packaged)
Drop direction :
PH800480T013-IBA
1 corner / edges /
Page25
sides each times
SAMPLE Ver.01
SPEC Edi.003
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1
5.1.2
If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1
5.2.2
5.2.8
Avoid any strong mechanical shock which can break the glass.
Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using.
Do not remove the panel or frame from the module.
The polarizing plate of the display is very fragile. So , please handle it very
carefully ,do not touch , push or rub the exposed polarizing with anything harder
than an HB pencil lead (glass , tweezers , etc.)
Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
surface of plate.
Do not touch the display area with bare hands , this will stain the display area.
Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with
a cleaning naphtha solvent.
To control temperature and time of soldering is 320 10 and 3-5 sec.
5.2.9
To avoid liquid (include organic solvent) stained on LCM .
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.3 STORAGE
5.3.1
Store the panel or module in a dark place where the temperature is 25
5.3.2
5.3.3
and the humidity is below 65% RH.
Do not place the module near organics solvents or corrosive gases.
Do not crush , shake , or jolt the module.
5
5.4 TERMS OF WARRANTY
5.4.1
5.4.2
Applicable warrant period
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for
use in your company’s general electronic products. It is guaranteed to perform
according to delivery specifications. For any other use apart from general
electronic equipment , we cannot take responsibility if the product is used in
nuclear power control equipment , aerospace equipment , fire and security
systems or any other applications in which there is a direct risk to human life
and where extremely high levels of reliability are required.
PH800480T013-IBA
Page26
SAMPLE Ver.01
SPEC Edi.003