TECH. CORP. SPECIFICATIONS CUSTOMER : SAMPLE CODE : SH320240T-009-I22Q MASS PRODUCTION CODE : PH320240T-009-I22Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 005 DRAWING NO. (Ver.) : LMD-PH320240T-009-I22Q (Ver:001) PACKAGING NO. (Ver.) : PKG- PH320240T-009-I22Q (Ver.002) Customer Approved Date: Approved Checked Designer 廖志豪 Rex Liao 張慶源 Yuan Chang 陳宗淇 Howard Chen POWERTIP 2013.03.21 TW RD APR □ Preliminary specification for design input ■ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 08/31/2012 01 001 New drawing. -- Howard 10/22/2012 01 002 New Sample. -- Howard 12/04/2012 01 003 Modify Features 4 Howard 01/11/2013 01 004 Modify Packaging Specifications Appendix Howard 03/20/2013 01 005 Modify Optical Characteristics 6,8 Howard Total: 27 Page PH320240T-009-I22Q Page2 SAMPLE Ver.01 SPEC Edi.005 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 2.2 2.3 2.4 Counter Drawing Interface Pin Description Timing Characteristics JUMPER(Setting different use) 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：LCM Drawing Packaging Note : For detailed information please refer to IC data sheet : Primacy(TFT LCD): Himax: HX8218-A + HX8615A (Or compatible IC ) PH320240T-009-I22Q Page3 SAMPLE Ver.01 SPEC Edi.005 1. SPECIFICATIONS 1.1 Features Main LCD panel 1.2 Item Standard Value Display Type 320(R、G、B) * 240 Dots LCD Type Normally white , Transmissive type（Sunlight Readable） Screen size(inch) 5.7 inch Viewing Direction 6 O’clock Color configuration RGB-Strip Backlight LED Interface Digital 24-bits RGB Other(controller/driver IC) 320(R、G、B) * 240 Dots ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ Mechanical Specifications Item Standard Value Unit Outline Dimension 159.8 (W) * 111.0 (L) * 9.0 (H)(Max) mm Item Standard Value Unit Viewing Area 116.2 (W) * 87.4 (L) mm Active Area 115.2 (W) * 86.4 (L) mm LCD panel Note : For detailed information please refer to LCM drawing PH320240T-009-I22Q Page4 SAMPLE Ver.01 SPEC Edi.005 1.3 Absolute Maximum Ratings Module 1.4 Item Symbol Condition Min. Max. Unit System Power Supply Voltage VDD AVSS=0 -0.3 7.0 V Input Voltage Vi - -0.3 VDD+0.3 V Operating Temperature TOP - -20 70 °C Storage Temperature TST - -30 80 °C DC Electrical Characteristics GND = 0V, Ta = 25°C Module Item Power Supply Voltage1 Supply Current Symbol Condition Min. Typ. VDD - 3.0 3.3 3.6 V VDD = 3.3 V Pattern= Pattern display - 90 - mA VDD = 3.3 V Pattern= black *1 - 95 140 mA IDD Max. Unit Note1:Maximum current display PH320240T-009-I22Q Page5 SAMPLE Ver.01 SPEC Edi.005 1.5 Optical Characteristics VDD= 3.3V, Ta=25°C TFT LCD Module Item Symbol Response time Condition Min. Ta = 25°C θX, θY = 0° Tr+Tf Typ. Max. unit 35 50 ms Note 2 50 50 50 50 - Deg. Note 4 θY+ θYθXθX+ CR ≥ 10 - CR Ta = 25°C θX , θY = 0° - 200 250 - Note 3 X Y X Y X Y X Y Ta = 25°C θX , θY = 0° 0.24 0.28 0.57 0.31 0.28 0.56 0.09 0.03 0.29 0.33 0.62 0.36 0.33 0.61 0.14 0.08 0.34 0.38 0.67 0.41 0.38 0.66 0.19 0.13 - Note1 Average Brightness Pattern=white display (With B/L) IV IF=200mA 230 270 - Uniformity (With B/L) △B IF=200mA 70 - - % Note1 Reflective Ratio - - - - 0.5 % Note5 Viewing angle Top Bottom Left Right Contrast ratio White Color of CIE Coordinate （With B/L） Red Green Blue PH320240T-009-I22Q Page6 cd/m2 Note1 SAMPLE Ver.01 SPEC Edi.005 Note 1: *1：△B=B(min) / B(max) * 100% *2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1° by Topcon luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: Normally White "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr PH320240T-009-I22Q Tf Page7 SAMPLE Ver.01 SPEC Edi.005 Normally Black "Black" "White" "Black" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: θX = θY = 0 ° 12H Φ = 180 ° Φ = 270 ° θY - θY + θY + = 9 0 ° θX - = 9 0 ° Y+ X- θX θX + Φ= 90 ° Φ θX + = 9 0 ° X+ Y6 H Φ= 0 ° θY - = 9 0 ° Note5: Applying with spectrophotometer in the condition of 400 to 700nm, 10nm/each; in accordance with JIS Z 8701 2 degree viewing XYZ system, measuring the reflective rate of 5 degree PH320240T-009-I22Q Page8 SAMPLE Ver.01 SPEC Edi.005 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25℃ - 200 mA Reverse Voltage VR Ta =25℃ - 10 V LED Power Dissipation PDLED - 0.12 W Power Dissipation PD - 2.4 W Ta =25℃ / 20mA Ta =25℃ Electrical / Optical Characteristics Item Symbol Forward Voltage VF Average Brightness (without LCD) IV Conditions IF= 200 mA Color PH320240T-009-I22Q Min. Typ. Max. Unit 6.0 6.8 8.5 V 3800 4500 - cd/m2 White Page9 SAMPLE Ver.01 SPEC Edi.005 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PH320240T-009-I22Q Page10 SAMPLE Ver.01 SPEC Edi.005 2.2 Interface Pin Description Pin No. Symbol 1 VDD 2 VDD 3 VDD 4 VDD 5 VSYNC Vertical sync input 6 ENB Data enable control 7 VSS Ground 8 DCLK 9 VSS 10 HSYNC 11 B7 data bit B7 12 B6 data bit B6 13 B5 data bit B5 14 B4 data bit B4 15 B3 data bit B3 16 B2 data bit B2 17 B1 data bit B1 18 B0 data bit B0 19 G7 data bit G7 20 G6 data bit G6 21 G5 data bit G5 22 G4 data bit G4 23 G3 data bit G3 24 G2 data bit G2 25 G1 data bit G1 26 G0 data bit G0 PH320240T-009-I22Q Function Analog power. Dot data clock Ground Horizontal sync input Page11 SAMPLE Ver.01 SPEC Edi.005 Interface Pin Description(CONT.) 27 R7 data bit R7 28 R6 data bit R6 29 R5 data bit R5 30 R4 data bit R4 31 R3 data bit R3 32 R2 data bit R2 33 R1 data bit R1 34 R0 data bit R0 35 VSS Ground 36 VSS Ground 37 NC No use. 38 NC No use. 39 NC No use. 40 NC No use. Backlight Pin Description 1 A 2 NC 3 K PH320240T-009-I22Q Power supply for LED Backlight anode input. No use. Power supply for LED Backlight cathode input. Page12 SAMPLE Ver.01 SPEC Edi.005 2.3 Timing Characteristics Signal Dclk Data Hsync Item Symbol Frequency Dclk 6.4 MHz High Time Tch 78 ns Low Time Tcl 78 ns Setup Time Tds 12 ns Hold Time Tdh 12 ns Period TH 408 DCLK Pulse Width Thp DCLK Back-Porch Thb 30 38 Display Period Thd 320 DCLK Front-Porch Thf 20 DCLK Period NTSC PAL Back-Porch Display Period Front-Porch 1 3 NTSC 5 TH TH 240 TH 4.5 Tvf PAL TH 23 Tvd Unit DCLK 15 Tvb PAL Max. 312.5 Tvp NTSC Typ. 262.5 Tv Pulse Width Vsync Min. TH 46.5 TCLK TCH TCL 2.64V DCLK 0.66V TDS TDH 2.64V DATA PH320240T-009-I22Q 0.66V Page13 SAMPLE Ver.01 SPEC Edi.005 DCLK DATA(R) Blacking Data R0 R1 R2 R3 R4 R5 DATA(G) Blacking Data G0 G1 G2 G3 G4 G5 Blacking Data B0 B1 B2 B3 B4 B5 DATA(B) ENB TV VSYNC TVP TVB TVD TVF HSYNC TH HSYNC TCLK THP DCLK THB DATA PH320240T-009-I22Q THD THF Valid Data Page14 SAMPLE Ver.01 SPEC Edi.005 Color Data Assignment PH320240T-009-I22Q Page15 SAMPLE Ver.01 SPEC Edi.005 2.4 JUMPER(Setting different use) (J1-1J2-2,J3-2,J4-1,J5-1,J6-2) PH320240T-009-I22Q Page16 SAMPLE Ver.01 SPEC Edi.005 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH320240T-009-I22Q run & Reliability test Inspection NG Shipment Ship out Page17 SAMPLE Ver.01 SPEC Edi.005 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH320240T-009-I22Q Page18 2. Process improvement proposal 4. Education And Training Activities SAMPLE Ver.01 SPEC Edi.005 3.2. Inspection Specification PH320240T-009-I22Q Page19 SAMPLE Ver.01 SPEC Edi.005 PH320240T-009-I22Q Page20 SAMPLE Ver.01 SPEC Edi.005 PH320240T-009-I22Q Page21 SAMPLE Ver.01 SPEC Edi.005 PH320240T-009-I22Q Page22 SAMPLE Ver.01 SPEC Edi.005 PH320240T-009-I22Q Page23 SAMPLE Ver.01 SPEC Edi.005 PH320240T-009-I22Q Page24 SAMPLE Ver.01 SPEC Edi.005 PH320240T-009-I22Q Page25 SAMPLE Ver.01 SPEC Edi.005 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test 5 ESD Test 6 Vibration Test (Packaged) 7 (Ver.B01) TEST CONDITION Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ → +25℃ → +80℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃∼35℃ 2. Humidity relative : 30%∼60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10∼55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Test (Packaged) Drop Direction :※1 corner / 3 edges / 6 sides each 1time PH320240T-009-I22Q Page26 SAMPLE Ver.01 SPEC Edi.005 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH320240T-009-I22Q Page27 SAMPLE Ver.01 SPEC Edi.005