5600 Series www.murata-ps.com 10A Current Sensing Transformers SELECTION GUIDE Order Code 56050C 56100C 56200C 56300C 56T100C 56T200C 56T300C FEATURES RoHS compliant Number of Turns ±1Turn 50 100 200 300 100CT 200CT 300CT Inductance Min. Pins 1&3 4.5mH @1V, 50kHz 18mH @1V, 50kHz 72mH @1V, 10kHz 160mH @1V, 10kHz 18mH @1V, 50kHz 72mH @1V, 10kHz 160mH @1V, 10kHz DC Resistance Pins 1&3, Ω 0.133 - 0.199 0.93 - 1.40 1.87 - 2.81 5.73 - 8.59 0.93 - 1.40 1.87 - 2.81 5.73 - 8.59 Terminating Resistance to Produce 1VOUT/1AIN Ω 50 100 200 300 100 200 300 50, 100, 200 & 300 Turn variants ABSOLUTE MAXIMUM RATINGS Primary current rating 10A Operating free air temperature range -40°C to 85°C Storage temperature range -40°C to 125°C 20kHz-200kHz frequency range Centre tapped variants available SOLDERING INFORMATION1 Peak wave solder temperature 300˚C for 10 seconds DESCRIPTION Pin finish Tin The 5600 series of current sense transformers are designed to monitor AC currents. They can be used for high frequency current sensing, for example in switched-mode power supplies, motor control and electronic lighting ballasts. TECHNICAL NOTES ISOLATION VOLTAGE All 5600 current sense transformers are tested at 500Vdc for a minimum of 1 second during our standard test procedure. In addition, as part of our qualification process carried out prior to product launch, the 5600 series demonstrated no isolation breakdown at 10kVdc or 6kVac with a bare conductor as the primary winding. Whilst this does not imply these parts are designed for environments where such high voltages may be present, it does demonstrate the level of isolation voltage these products are able to withstand. Full mains safety isolation can be achieved with appropriately insulated wire on the primary winding. Specifications typical at TA = 25°C 1 For further information, please visit www.murata-ps.com/rohs For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KMP_5600C_C01 Page 1 of 2 5600 Series 10A Current Sensing Transformers PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT DETAILS Schematic 16.79 (0.661) 12.70 (0.500) 1 XYYWW 56300C 8.89 (0.350) 2* 3 6.35 (0.250) Ø5.00 (0.197) 1 2* 3 20.19 (0.795) 1.02 (0.040) x3 HOLES Ø0.065 (1.65) Ø0.059 (1.50) 0.10 (0.004) Unless otherwise stated, all dimensions in mm (inches) ± 0.25 (0.010). TUBE OUTLINE DIMENSIONS 11.20 (0.441) 0.60±0.15 (0.024±0.006) 5.08 (0.200) 6.35 (0.250) 22.20 (0.874) 4.06 (0.160) 30.00 (1.181) Ø0.79±0.05 (0.031±0.002) 12.70 (0.500) 2.10±0.25 (0.083±0.010) 7.00 (0.276) Package weight: 5.7Typ. *Pin 2 is fitted on 56TXXXC variants only. Arrow designates winding direction referenced to inner core surface. Unless otherwise stated, all dimensions in mm (inches) ± 0.25 (0.010). Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Tube length: 475±2 [18.701±0.079] Unless otherwise stated, all dimensions in mm (inches) ± 0.25 (0.010). Tube quantity: 25 Tube material: Antistatic coated clear PVC Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2012 Murata Power Solutions, Inc. www.murata-ps.com/support KMP_5600C_C01 Page 2 of 2