Latest products Power supplies 40-400 Watt open frame AC-DC 460-7000 Watt enclosed AC-DC or DC-DC Open frame MVAC250: AC-DC power supply 250 Watt high density, 3"x5" • • • • • • -20 to +70°C full power operation Active inrush protection Current share, remote on-off, PS_OK option (AFD) IEC60601 Ed.3 medical (2 x MOPP pri-sec) EN60950 ITE safety approved Droop current share and internal ORING (AFR) Package dimensions L 127mm W 76.2mm H 35.6mm 5" 3" 1.4" Natural convection cooling Forced air cooling Main output Fan output MVAC250-12xxx 170W 250W @ 250LFM 12V 12V @ 12W 94% MVAC250-24xxx 170W 250W @ 250LFM 24V 12V @ 12W 94% MVAC250-48xxx 170W 250W @ 250LFM 48V 12V @ 12W 94% MVAC-COVER Typical efficiency 80 Optional cover ® PLUS GOLD MVAC400: AC-DC power supply 400 Watt high density, 3"x5" • • • • • • Remote on-off, remote sense, and PS_OK Current sharing option (AFD) Active inrush protection IEC60601 Ed.3 medical (2 x MOPP pri-sec) EN60950 ITE safety approved Droop current share and internal ORING (AFR) Package dimensions L 127mm W 76.2mm H 35.6 mm 5" 3" 1.4" Natural convection cooling Forced air cooling Main output Fan output MVAC400-12xxx 250W 400W @ 250LFM 12V 12V @ 12W 94% MVAC400-24xxx 250W 400W @ 250LFM 24V 12V @ 12W 94% MVAC400-48xxx 250W 400W @ 250LFM 50V 12V @ 12W 94% MVAC-COVER 80 Optional cover MVAD160: AC-DC power supply 160 Watt high density, 2"x4" • • • • Typical efficiency 110W wide operating temperature range 2" x 4" standard footprint High efficiency up to 93% 3rd ed. medical and ITE safety approved ® PLUS GOLD Package dimensions L 5.8mm W 101.6mm H 38.1mm 2" 4" 1.5" Natural convection Ta=50°C Conduction Ta=50°C Forced air Ta=50°C Main output Aux output Efficiency MVAD160-125 110W 160W 160W @ 350LFM 12V 5V 92% MVAD160-245 110W 160W 160W @ 350LFM 24V 5V 93% MVAD160-485 110W 160W 160W @ 350LFM 48V 5V 93% MVAD160-12 110W 160W 160W @ 350LFM 12V - 92% MVAD160-24 110W 160W 160W @ 350LFM 24V - 93% MVAD160-48 110W 160W 160W @ 350LFM 48V - 93% Open frame MVAD040: AC-DC power supply 40 Watt high density, 2"x4" • • • • Package dimensions Convection-cooled operation up to 40W 2" x 4" standard footprint Universal AC input ITE (2nd) and medical 3rd ed. MOPP safety approved L 101.6mm 4" W 50.8mm 2" H 33.02mm 1.3" Natural convection cooling Load current Input voltage Output voltage Efficiency MVAD040-12 40W 0 to 3.34A 90-264 Vac 12Vdc 87% MVAD040-24 40W 0 to 1.67A 90-264 Vac 24Vdc 88% MVAD040-48 40W 0 to 0.84A 90-264 Vac 48Vdc 89% MVAD065: AC-DC power supply 65 Watt high density, 2"x4" • • • • Convection-cooled operation up to 65W 2" x 4" standard footprint Universal AC input ITE (2nd) and medical 3rd ed. MOPP safety approved Natural convection cooling Package dimensions L 101.6mm 4" W 50.8mm 2" H 33.02mm 1.3" Load current Input voltage Output voltage Efficiency MVAD065-12 60W 0 to 5.0A 90-264 Vac 12Vdc 88% MVAD065-24 65W 0 to 2.71A 90-264 Vac 24Vdc 89% MVAD065-48 65W 0 to 1.36A 90-264 Vac 48Vdc 90% MVAB120: AC-DC power supply 120 Watt high density, 2"x4" • • • • Convection-cooled operation up to 75W -20°C to +50°C full power Universal AC input with active power factor correction ITE (2nd) and medical 3rd ed. MOOP safety approved Package dimensions L 101.6mm 4" W 50.8mm 2" H 33.02mm 1.3" Natural convection cooling Load current Input voltage Output voltage Efficiency MVAB120-12 75W 120W @ 250LFM 90-264 Vac 12Vdc 88% MVAB120-24 75W 120W @ 250LFM 90-264 Vac 24Vdc 90% MVAB120-28 75W 120W @ 250LFM 90-264 Vac 28Vdc 90% MVAB120-48 75W 120W @ 250LFM 90-264 Vac 48Vdc 91% Enclosed front-end 1U D1U54 series: AC-DC or DC-DC power supply 650 up to 1500 Watt • • • • Power density up to 35W/in³ N+1 redundancy capable; hot plugging (up to 8 in parallel) PMBus™ / I2C interface with status indicators Active current sharing on 12V main output; ORing FET Package dimensions L 322.0mm 12.7" W 54.5mm 2.15" H 1U 1U Output power Input voltage Output voltage D1U54P-W-1200-12-Hx 1200W 90-264Vac 12Vdc D1U54-D-1200-12-Hx 1200W 40-72Vdc 12Vdc D1U54P-W-1300-12-Hx 1300W 90-264Vac 12Vdc D1U54P-W-650-12-Hx 650W 90-264Vac 12Vdc D1U54-D-650-12-Hx 650W 40-72Vdc 12Vdc PM D1U3CS series: AC-DC or DC-DC power supply 850 up to 1600 Watt • • • • Power density up to 21.7W/in³ N+1 redundant, hot pluggable, ORing FET PMBus™ / I2C interface with status indicators Variable speed fan; active current sharing Package dimensions L 279.4mm 11" W 81.3 3.2" H 1U 1U Output power Input voltage Output voltage 850W 90-264Vac 12Vdc D1U3CS-W-1300F-12-Hx 1300W 90-264Vac 12Vdc D1U3CS-D-1600-12-Hx 1600W 40-72Vdc 12Vdc D1U3CS-W-850-12-Hx 80 PM ® PLUS GOLD D1U86 series: AC-DC or DC-DC power supply 460 or 1600 Watt • • • • Power density 38.6W/in³ N+1 redundancy capable; hot plugging (up to 8 in parallel) PMBus™ / I2C interface with status indicators Current sharing on 12V main output, ORing FET Package dimensions L 196.9mm 7.75" W 86.4mm 3.4" H 1U 1U Output power Input voltage Output voltage D1U86G-W-460-12-HBxDC 460W 90-264Vac 12Vdc Standby voltage 12Vdc D1U86P-W-1600-12-HBxDC 1600W 90-264Vac 12Vdc 12Vdc D1U86-D-1600-12-HBxDC 1600W 40-72Vdc 12Vdc 12Vdc PM Enclosed front-end 1U D1U4 series: AC-DC power supply 1200 to 2200 Watt, 12 or 54V dc, 1U Package dimensions • Power density up to 17.9W/in³ • N+1 redundant, hot pluggable, ORing FET • PMBus™ power management bus supported by dual redundant I2C interfaces • PoE compatible L 355.6mm 14" W 101.6mm 4" H 1U 1U Output power Input voltage D1U4-W-1200-12 1200W 90-264Vac Output voltage 12Vdc D1U4-W-1600-12 1600W 90-264Vac 12Vdc D1U4CS-D-2100-5X 2100W 40-72Vdc 54Vdc D1U4CS-W-2200-12 2200W 90-264Vac 12Vdc D1U4-W-1600-54-HBxC 1600W 90-264Vac 54Vdc D1U series: AC-DC power supply 1200, 1600 or 2000 Watt • • • • PM Package dimensions Power density up to 21.9W/in3, active current sharing N+1 redundant, hot pluggable, ORing FET I2C interface with status indicators Optional 1U 19" power shelf L 304.8mm 12" W 120.7mm 4.75" H 1U 1U Output power Input voltage Output voltage D1U-W-1200-12 1200W 90-264Vac 12Vdc D1U-W-1600-12 1600W 90-264Vac 12Vdc D1U-W-1200-48 1200W 90-264Vac 48Vdc D1U-W-1600-48 1600W 90-264Vac 48Vdc S1U-3X-16-A-12-RC Power shelf for 12V D1U D1U-W-2000-48 2000W 90-264Vac 48Vdc S1U-3X-16-A-48-RC Power shelf for 48V D1U Optional power shelf PM Enclosed front-end 3 phase AC-in D2U5T: 3 phase AC-DC power supply 7KW (480Vac), 3.5KW (230Vac) • • • • High efficiency; > 96% @ 50% load 54VDC main output N+1 redundant, droop sharing and I2C bus interface 3.3V or 5V standby output D2U5T-H3-7000-54-HU4C Package dimensions L 457.2mm 18" W 129.5mm 5.1" H 2U 3.3" Output power Input voltage Output voltage Standby voltage 7000W 180-525Vac 54Vdc selectable (3.3 or 5V) PM Cat. No. F10-1 Power supplies Global locations For details please visit www.murata.com Note 1 Export Control For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party’s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment 2 Aerospace equipment 3 Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above 3Product specifi cations in this catalog are as of March 2014. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party’s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. www.murata.com © copyright 2015 Murata Electronics F10-1 Murata Manufacturing Co., Ltd.