1600C & 1630C www.murata-ps.com Quad Data-bus Isolators SELECTION GUIDE Order Code 1600C 1630C Type Function Turns Ratio Quad isolator Quad isolator 5V to 5V logic isolation 5V to 15V logic isolation 1:1 1:3 Max. Pulse Width Typ. Primary Inductance Typ. Inerwinding Capacitance μs mH pF 5 2.6 3 1 60 34 ABSOLUTE MAXIMUM RATINGS FEATURES Operating free air temperature range 0°C to 70°C n RoHS compliant Storage temperature range -40°C to 125°C n Logic translation Isolation voltage (flash tested for 1 second) 500Vrms Insulation resistance at 500Vdc >10GΩ n Bi-Directional n Invert / non-invert SOLDERING INFORMATION2 n TTL-CMOS conversion Peak wave solder temperature, 1.5mm from case 300˚C for 10 seconds Pin finish Matte tin n Toroidal construction n Low profile 1 The maximum pulse width limit to be applied to the repetition curve. 2 For further information, please visit www.murata-ps.com/rohs n 500Vrms isolation All specifications typical at TA=25°C. n Backward compatible with Sn/Pb soldering systems OPERATIONAL CONFIGURATIONS Non-Inverted +VE Going Pulse DESCRIPTION The 1600 series are quad isolation transformer packs for use in digital circuits. They are particularly suited to isolating microprocessor bus connections and performing logic level translation. Being completely passive, power savings are offered over opto-coupled or emitter follower solutions. Non-Inverted -VE Going Pulse +5V 1 2 16 15 0V +5V 1 2 16 15 0V Quad-Bus Isolator Quad-Bus Isolator Inverted +VE Going Pulse Inverted -VE Going Pulse +5V 1 2 16 15 +5V 1 2 16 15 0V 0V Quad-Bus Isolator Quad-Bus Isolator For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KMP_1600C_B05 Page 1 of 2 1600C & 1630C Quad Data-bus Isolators PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS PIN CONNECTIONS 22.50 (0.886) 22.50 (0.886) 16 15 14 13 12 11 10 1600C XYYWW 1600C 6.86 (0.270) 6.86 (0.270) N N N N 1 1 1 1 XYYWW 5.80 (0.228) 5.80 (0.228) 1 4.50 (0.177) 2.54 (0.10) 17.78 (0.7) 2.54 (0.10) 17.78 (0.7) 8.85 (0.348) 2 3 4 5 6 7 8 0.64±0.15 (0.025±0.006) 0.64±0.15 (0.025±0.006) 4.50 (0.177) All dimensions in mm (inches) ± 0.25 (0.001) unless otherwise stated. Package weight: 1.7g Typ. Package quantity: 20 9 0.50±0.05 (0.02±0.002) 0.50±0.05 (0.02±0.002) 0.26±0.05 (0.01±0.002) 0.26±0.05 (0.01±0.002) 8.85 (0.348) Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2011 Murata Power Solutions, Inc. www.murata-ps.com/support KMP_1600C_B05 Page 2 of 2