UL 60950-1 - MINMAX Technology

Issue Date:
2009-08-25
Page 1 of 2
Report Reference #
E250439-A24-UL-1
COVER PAGE FOR TEST REPORT
Product Category:
Product Category CCN:
Test Procedure:
Product:
Model/Type Reference:
Rating(s):
Standards:
Power Supplies for Information Technology Equipment Including Electrical
Business Equipment
QQGQ2, QQGQ8
Component Recognition
AC/DC POWER MODULE
AGF-10Sx ( where x = 03, 05, 12, 15, 24)
Input: 100-240 Vac, 260 mA, 50/60 Hz
Output:
AGF-10S03 +3.3 Vdc/2500 mA.
AGF-10S05 +05 Vdc/2000 mA.
AGF-10S12 +12 Vdc/833 mA.
AGF-10S15 +15 Vdc/667 mA.
AGF-10S24 +24 Vdc/417 mA.
UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment Safety - Part 1: General Requirements)
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology
Equipment - Safety - Part 1: General Requirements)
Applicant Name and
Address:
MINMAX TECHNOLOGY CO LTD
18 SIN-SIN RD
AN-PING INDUSTRIAL DISTRICT
TAINAN CITY
702 TAIWAN
This Report includes the following parts, in addition to this cover page:
1. Specific Inspection Criteria
2. Specific Technical Criteria
3. Clause Verdicts
4. Critical Components
5. Test Results
6. National Differences
7. Enclosures
Copyright © 2009
Issue Date:
2009-08-25
Page 2 of 2
Report Reference #
E250439-A24-UL-1
This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the
above referenced Standards. The products have been found to comply with the requirements covering the category and the products are
judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such
products which comply with this Test Report and any other applicable requirements of Underwriters Laboratories Inc. ('UL') in accordance
with the Follow-Up Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's
Follow-Up Service under the indicated Test Procedure.
The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety.
UL authorizes the applicant to reproduce the latest pages of the referenced Test Report consisting of the first page of the Specific Technical
Criteria through to the end of the Conditions of Acceptability.
Any information and documentation provided to you involving UL Mark services are provided on behalf of Underwriters Laboratories Inc(ULI)
or any authorized license of ULI.
Test Report By:
Reviewed By:
Terence She
Associate Project Engineer
Underwriters Laboratories Taiwan Co., Ltd.
Thomas K. Filler
Staff Engineer
Underwriters Laboratories Inc.
Copyright © 2009