AGF-10 SERIES AC/DC Power Module 10W FEATURES ►Ultra-compact Dimensions: 52.4x27.2x23.5 mm (2.1x1.1x0.9”) ►Fully encapsulated Module with Solder Pins for PCB Mounting ►Universal Input 85-264 VAC, 47-440 Hz ►Eco Design, compliant to Energy Star specification and ErP Directive 2009/125/EC ►Protection Class ll ►Safety Approval to cUL/UL/IEC/EN 60950-1 ►Over Load and Over Voltage Protection ►3 Year Product Warranty PRODUCT OVERVIEW The MINMAX AGF-10 series is a new range of fully encapsulated AC/DC power supply modules. They are designed for direct PCB mounting with solder pins. The product features EMI-filter to EN55022, class B and EMS compliance to the EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets. The AGF-10 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Output Number Voltage VDC 3.3 5 12 15 24 AGF-10S03 AGF-10S05 AGF-10S12 AGF-10S15 AGF-10S24 Output Current Input Current Max. capacitive Efficiency Load Max. mA 2500 2000 833 667 417 115VAC, 60Hz @Max. Load mA(typ.) 171 201 191 193 201 (typ.) @Max. Load % 70 72 76 75 72 uF 2200 2200 1000 1000 680 Input Specifications Parameter Input Voltage Range Input Frequency Range Input Voltage Range No-Load Power Consumption Model Min. 85 47 120 ------- All Models 115VAC 230VAC Inrush Current (Cold Start at 25℃) Typ. ------------- Max. 264 440 370 0.3 15 30 Unit VAC Hz VDC W A A Output Specifications Conditions Parameter Output Voltage Accuracy Line Regulation Load Regulation Vin=Min. to Max. Iout=Min. to Max. 3.3 & 5.0VDC Output Models Other Output Models Ripple & Noise (20MHz) Minimum Load Over Voltage Protection Temperature Coefficient Overshoot Zener diode clamp ------- Typ. ±1.0 ±0.5 ±0.5 1.5 0.8 Max. ±2.0 ±1.0 ±1.0 1.8 1.0 Unit % % % %VPP of Vo %VPP of Vo --------- 10 120 ±0.01 --- ----±0.02 5 %Inom. % of Vo %/℃ % Vout --- --- %Inom. Foldback, auto-recovery 105 (long term overload condition may cause damage) Hiccup mode, indefinite (automatic recovery) Current Limitation Short Circuit Protection E-mail:[email protected] 2011/09/20 REV:12 Min. ----- Tel:886-6-2923150 Page 1 of 3 AGF-10 SERIES AC/DC POWER MODULE 10W General Specifications Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) EMC Emission Conditions Input to Output, 60 Seconds 500 VDC Min. Typ. Max. Unit 3000 ----VACrms 100 ----MΩ --125 --KHz --20 --ms 300,000 ----Hours EN 55011, class B, EN 55022, class B, FCC part 15, class B Specification Requirement Performance Criteria Air ±8KV Cont. ±4KV B 80~1000MHz, 10V/m 80% AM, 1KHz modulation A AC port ±2KV DC, SL, TL ±2KV not less than 1 min. B 1.2/50uS(8/20uS) AC dif. ±1KV DC ±0.5KV B 0.15~80MHz, 10Vrms (functional earth ports included) B 80% AM, 1KHz modulation 50Hz/60Hz, 30A/m A 30%, 10ms B 60%, 100ms, 95%, 5000ms C According IEC/EN 60536 cUL/UL 60950-1,IEC/EN 60950-1 MIL-HDBK-217F@25℃, Ground Benign Conducted and radiated Standard EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EMC Immunity according EN61000-6-1 EN61000-4-6 EN61000-4-8 EN61000-4-11 Protection Class II Safety Approvals Input Fuse All Models 1.5A Slow – Blow Type External Fuse (Recommended) Environmental Specifications Parameter Temperature Range (operational) Power Derating Storage Temperature Range Over Temperature Protection Cooling Humidity (non condensing) Ambient +50℃ to +70℃ Conditions -25℃ -40℃ at 90℃ (automatic recovery at 67℃) Free-Air convection --- +70℃ 0.375W / ℃ +85℃ 95 % rel. H Notes 1 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0~20 MHz 3 These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power 4 All AC/DC modules should be externally fused at the front end for protection. 5 Other input and output voltage may be available, please contact factory. 6 Specifications subject to change without notice supplies however they may not meet all listed specifications. E-mail:[email protected] 2011/09/20 REV:12 Tel:886-6-2923150 Page 2 of 3 AGF-10 SERIES AC/DC POWER MODULE 10W Package Specifications Mechanical Dimensions Pin Connections 23.5 [0.93] 10.0 [0.39] 10.16 [0.40] AC(N) – AC Neutral 2 AC(L) – AC Line 3 +Vout 4 -Vout 5.0 [0.20] Bottom View Function 1 52.4 [2.06] 1.0 [ 0.04] 3 45.72 [1.80] 4 0.7 [0.03] Pin 2 1 ►All dimensions in mm (inches) ►Tolerance: ±0.5 20.32 [0.80] ►Pin (±0.02) diameter 1.0 ±0.1 (0.04±0.004) 27.2 [1.07] Physical Characteristics Case Size : Case Material : 52.4x27.2x23.5mm (2.06x1.07x0.93 Inches) Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Weight : 54g Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2011/09/20 REV:12 Page 3 of 3