Advanced Monolithic Systems Packaging for Automatic Handling Tape & Reel and Ammo Pack Tape and Reel Packing Ammo Pack Tape and reel packing is available for all SO, SOT-223, TO-92, DD and D packages. Surface mount packages are retained in an embossed carrier tape by a cover tape. For TO-92 package, the leads are secured to a backing tape by a cover tape. TO-92 packages are also available in “ammo pack”, in which the leads are secured to a backing tape by a cover tape and are fanfolded into a box. Tape and Reel Specifications Package type Quantity/ reel Reel Diameter Carrier Tape Width Carrier Tape Pitch S SO-8 2,500 13” 12mm 8mm S SO-14 2,500 13” 16mm 8mm S SO-16 2,500 13” 16mm 8mm M SOT-23-3 3,000 7” 8mm 4mm M-1 SOT-23-5 3,000 7” 8mm 4mm M-2 SOT-23-6 3,000 7” 8mm 4mm AMS Package Code L M SOT-89 1,000 7” 12mm 8mm SOT-223 2,500 13” 12mm 8mm TO-263-2L 500 13” 24mm 16mm TO-263-3L 500 13” 24mm 16mm TO-263-5L 500 13” 24mm 16mm D TO-252 2,500 13” 16mm 8mm N TO-92 2,000 14” 18mm 12mm EMBOSSED CARRIER DIMENSIONS (12mm, 16mm, 24mm tape only) P0 D K P2 t 10 PITCHES CUMULATIVE TOLERANCE ON TAPE ±0.2mm(±0.008) E TOP COVER TAPE SEE NOTE 1 A0 F W B1 K0 B0 SEE NOTE 1 FOR MACHINE REFERENCE ONLY INCLUDING DRAFT AND RADII CONCENTRIC AROUND B0 P EMBOSSMENT CENTER LINES OF CAVITY USER DIRECTION OF FEED 1 D1 FOR COMPONENTS 2.0mmX1.2mm AND LARGER TAPE AND REEL SPECIFICATIONS EMBOSSED TAPE – CONSTANT DIMEMSIONS Tape Size 12mm D 1.5 16mm 24mm E +0.10 –0.0 P0 t (Max.) 1.75± 0.10 4.0± 0.10 0.600 (0.069± 0.004) (0.157± 0.004) A0 B0 K0 See Note 1 (0.024) (0.059) +0.004 -0.0 EMBOSSED TAPE – VARIABLE DIMEMSIONS Tape Size 12mm B1 Max. 24mm F 1.5 (0.217± 0.002) 8.2 (0.323) 16mm D1 Max. 12.1 P2 2.0± 0. 05 30 12.0± 0. 30 6.5 (0.079± 0.002) (1.181) (0.472± 0.012) 40 16± 0. 30 2.0± 0. 10 (1.575) (0.630± 0.012) 5.5± 0. 05 (0.059) 7.5± 0. 10 (0.476) (0.295± 0.004) 20.1 11.5± 0. 10 (0.791) K Max. (0.256) (0.079± 0.004) (0.453± 0.004) R Min W 50 24± 0. 30 (1.969) (0.945± 0.012) Note1: A0 B0 K0 are determined by component size. The clearance between the component and the cavity must be within 0.05(0.002) min. to 0.65 (0.026) max. for 12mm tape and 0.05(0.002) min. to 0.90 (0.035) max. for 16mm tape. The component cannot rotate more than 10° witin the determined cavity. Note 2: Tape and components shall pass around radius “R” without damage. Note 3: Dimensions are in millimeters (inches) unless otherwise noted. BENDING RADIUS R MIN BENDING RADIUS SEE NOTE 2 SMTR AMS DRW# 040202 2 TAPE AND REEL SPECIFICATIONS COMPONENT ROTATION 10° MAXIMUM COMPONENT ROTATION TYPICAL COMPONENT CAVITY CENTER LINE TYPICAL COMPONENT CENTER LINE SMTR AMS DRW# 040203 REEL DIMENSIONS W2 (MEASURED AT HUB) B A C D W1 (MEASURED AT HUB) SMTR AMS DRW# 040204 TAPE SIZE 12mm A 330 B MIN C D MIN +0.25 1.5 13.0± 0.20 20.2 –4.0 (0.059) (0.512 ± 0.008) (0.795) (12.992) +0.010 W1 12.4 330 +0.25 1.5 13.0± 0.20 20.2 –4.0 (0.059) (0.512 ± 0.008) (0.795) 16.4 +2.0 22.4 –0.0 (0.882) (0.646) +0.078 -0.158 330 18.4 (0.724) -0.0 (12.992) +0.010 24mm +2.0 –0.0 (0.488) +0.078 -0.158 16mm W2 -0.0 +0.25 1.5 13.0± 0.20 20.2 –4.0 (0.059) (0.512 ± 0.008) (0.795) (12.992) +0.010 24.4 +2.0 30.4 –0.0 (1.197) (0.961) +0.078 -0.158 -0.0 3 TAPE AND REEL SPECIFICATIONS PACKAGE ORIENTATION SOIC PACKAGE ORIENTATION SOT-23 PACKAGE ORIENTATION USER DIRECTION OF FEED SOT-23-5 PACKAGE ORIENTATION USER DIRECTION OF FEED TO-252 (D PAK) PACKAGE ORIENTATION USER DIRECTION OF FEED SOT-89 PACKAGE ORIENTATION USER DIRECTION OF FEED TO-263 (DD PAK) PACKAGE ORIENTATION USER DIRECTION OF FEED SOT-223 PACKAGE ORIENTATION USER DIRECTION OF FEED USER DIRECTION OF FEED SMTR AMS DRW# 040205 4 TAPE AND REEL SPECIFICATIONS TO-92 TAPE DIMENSIONS P0 H W1 P2 P1 S H4 F1 F2 H1 D W P TO92TR AMS DRW# 050201 TO-92 REEL DIMENSIONS SYMBOL DESCRIPTION DIMENSIONS D Sprocket Hole Diameter 4 ± 0.2 H Length from Seating Plane 16 ± 0.5 H1 Sprocket Hole Location H4 P Component Base Height Sprocket Hole Pitch 9 ± 0.5 20 Max 12.7 ± 0.2 P0 Pitch of Component 12.7 ± 0.5 P1 Lead Location 3.85 ± 0.5 P2 Center of Seating Plane Location S W W1 Component Lead Spacing Carrier Tape Width Adhesive Tape Width F1, F2 356mm TYP 30.5mm TYP 6.35 ± 0.4 5 + 8, -0.2 18 + 1, -0.5 6.0 ± 1.0 2.5 + 0.4, -0.1 Lead-to-Lead Distance TO92TR AMS DRW# 050202 PACKAGE ORIENTATION STYLE S : Standard (Flat Side of Package Faces Toward the Adhesive Tape) STYLE R: Reverse (Rounded Side of Package Faces Toward the Adhesive Tape) TO92TR AMS DRW# 050203 TO92TR AMS DRW# 050204 5